blow moulding machines used for sale

10 and 20 ltr for sale. Closure 61 mm

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

Several cut-off/cold/hot separators for sale. Different sizes

Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould  ...

Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours

PET bottle blow molding machine, with a production capacity of up to 4000 bottles/h (depending on the format). For formats between 0.25 liters up to 3 liters. Composed by: - Oven for heating preforms composed of 6 heating modules with 8 infrared lamps each. - Preform transfer wheel - Compressed air blowing body in two stages, low pressure pre-blowing and subsequent high pressure blowing. - Bottle transfer wheel Delivered with pallet turner. Available documentation

Single-station machine for containers up to 10 ltr. Extruder 60/24D. Single head with viewing stripes. Clamping force 110 kN. Canisters were produced with viewing strips in 2.5 and 5 ltr

Kautex KB 15/10-S60/25 Blowmoulding machine From 1992 Type: continuous extrusion Clamping force : 200 kN Closing stroke for moulds: 2250 mm Max volume for the part: 30 L Cylinder diameter: 90 mm Die diameter: 140;170;190 mm Max package for tools: 700600(2300) mm Parison control: Yes Installed power: 125 kVA

Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English

The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32  ...

Stretch cart: 1600 mm and width: 200 mm, Bausano brand.

MP1D blower for PE bottles from 100 ml up to 1 LT Double carriage! Excluding plastic grinding mill the machine is in good condition and working. Regarding the video: only one working head, as modifications have been made to bring the center distance to 120mm, with my molds it is not possible to make double heads With molds with a maximum cavity of 100 mm (subject to verification) it is possible to make both heads, restoring the initial center distance. Carriage translation stroke: 260 mm Mold opening 140 mm Mold thickness 80 2 mm Clearance between plates 300 mm There is documentation Moog is installed Machine sold as it is

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.

SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.

For sale PET blower with related format molds: - 500ml - 750 ml (Both version for interlocking cap and for trigger) - 1 Lt - 1.25 LT The machine has a production capacity of 510 bottles/h Seen and liked

STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately

LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Produced ( 0,33 L 0,5 L 1,0 L 1,5 L 2,0 L) AUXILARY EQUIPM

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

We are selling blow molding machine Voith fisher maximum capacitity 100 Liter. We put on the machine new extruder 80mm with new gearbox, heaters and motor 37kw,also new accumulation head is instaled capacity 5 liter. Machine have new pneumatic, new electric cabinet with plc and main control unit with 15 inch touch panel. Also machine have new plc with 7 inch touch panel for wall thickness control.

Used STRATOS 10E blow molding machine for the production of PET packaging with a capacity of up to 10L. SMF STRATOS 10E is adapted to the Fi38 thread. Year of production 2016. Set includes: 1. AUTOMATIC PET BOTTLE BLOWING MACHINE STRATOS 10E with a set of molds for 1 format 2. Preform feeder 3. Bottle receiver 4. Power Wizard™ 5. Air recuperation system 6. DR-310 preform basket tipper PRODUCTION DATA • Number of sockets - 2 • Maximum package diameter - 220mm • Maximum packaging height 435mm • Packaging capacity 3.0÷10.0l ELECTRICAL SYSTEM • Voltage (standard) According to PN-EN 50160 • 400V ± 5% for fast voltage changes with an averaging time of 10 ms. • 400V ± 10% for slow voltage changes with an averaging time of 10 min. • Frequency 50 ÷ 60Hz • Connections: Three phases (3P) + Neutral (N) + Protective (PE) • Control voltage 24 V/DC • Ins ...

Linear blow molding equipment for sale with a capacity of 6000 bottles/hour for 0.5 pet containers and 4000 bottles/hour for 1.5 pet containers. There are guarantees, no defects. Main equipment parameters 3500, 0 × 1450, 0 × 2000, 0 Release year 2020 Country of origin Shanghai, China, all packed and ready to ship. The price includes all the necessary additional equipment for the full cycle of production of pet containers. There are also 4 bottle designs included. We can connect everything at your facility and make start-up equipment. 1. Automatic feeding of the preform to the blow molding machine 2. High pressure compressor 3.2M³/3.0MPA 3. Low pressure compressor 2.0M³/1.0MPA 4. Dehumidifier and air purifier 5. Air buffer for 500 bottles. 6. Preform cooling equipment. 7. Filters Includes 4 preforms (included in the price) 1. Presform 500ml 4 bottles (2  ...

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Sidel SBO 2F Blowmoulding machine Sidel with 2 molds of 2,400 bottles per hour, the condition of the machine is also excellent.

year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!

The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed