Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers P ...

Fabricante: Homag , Tipo: KAL 310/8/A20/S2, Ano: 2005, Controlo: PC 22, Largura da peça de trabalho min-max mm: min 55/100, Min.-max. altura da peça de trabalho em mm: 12 - 60, Alimentação Min-max m/min: 18 - 24, Gesteuert Einlauflinear: Sim, Pré-moagem: 2 x 3kW, Aplicação do agente de separação: sim, revista Coil: 2, estações Mitre: Fase / Gerade, Pré-moagem: 2 x 1,5 kW, Moagem bevel: FK 13 - 8Fach, moagem de raio: 4 kW, Tipo de canto: MN 21, raspador plano: FA 11, Ligação EVA: A 20, Cinto/rolo de pressão superior: Banda, peça de trabalho realimentar: vorinstalliert, TEXTO LIVRE: Frreiplatz, Ano :2005

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, ...

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : ...

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radi ...

Description: HOMAG OPTIMAT KAL 310 / 7 / A20 / S2 Edge Bander with return sistem control - yes edge buffing unit - yes edge magazine with - yes edge sanding unit - no edge thickness - yes feed - 18-20 mts/min fine trimming unit - yes flat scraping unit - yes gluing unit - yes joint trimming unit - yes , profile scraping unit - yes profile trimming unit - yes return system - yes , workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness - 10-60 mm dimension (l x w x h) and weight approx. (6 packs) 8800 x 1000 x 1900 mm - 5000 Kg 3500 x 1300 ,x 900 mm - 300 Kg 2900 x 1800 x 900 mm - 600 Kg 6400 x 1300 x 900 mm - 1000 Kg 2000 x 1300 x 900 mm - 200 ...

Description: HOMAG OPTIMAT KAL 310 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,060 x 1,010 x 1,870 mm, weight approx.: 3,500 kg ...

• mais informação

Description: HOMAG KAL 310 Edge Bander control - yes Joint milling unit - yes edge magazine with - yes End trimming unit - yes edge thickness - yes feed 18 - 20mts / min fine trimming unit - yes flat scraping unit - yes profile trimming unit - yes Buffing unit - yes universal milling unit - no workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness 10 - 60 mm workpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 20 m/min, workpiece pre heater: Yes, fine trimming unit: Yes, profile trimming unit: Yes, universal milling unit: No, flat scraping unit: Yes, control: Yes, Approx. Onsite Dimension. (l x w x h): 3,830 x 2,390 x 1,980 mm, weight app ...