injection moulding machines used for sale

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

screw size: 98 mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 8600 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

screw size: 84 mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 440 kNvolumn: 1660 volt: Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg

screw size: unbkt. mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 150 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

screw size: 62 mminjection shot weight in Polysterol: 903 g/PSclosing pressure: 3300 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7180 Type: ALLROUNDER 320 C 600 Producer: Arburg Created: 2008 Parameters: Distance between tie rods: 320x320 mm Clamping force: 500 kN Injection weight: 2300 kg

screw size: 133 mminjection shot weight in Polysterol: 5940 g/PSclosing pressure: 8000 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

screw size: 115 mminjection shot weight in Polysterol: 3915 g/PSclosing pressure: 6600 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

clamping force: 4.000 kNinjection volume: 735 cm³screw diameter: 60 mmplaten size: 1.400 x 1.030 mmCondition: used,Specification: horizontal injection moulding machine, factory no: Injection unit 1:- screw diameter: 60 mm- metering stroke: 200 mm- Screw speed: 226 rpm- Injection flow: 351 cm³/sec- Injection volume: 735 cm³- Spec. injection pressure: 1.489 bar- Spec. injection pressure increased: 2,011 barInjection unit 2:- Screw diameter: 40 mm- Metering stroke: 140 mm- Screw speed: 400 rpm- Injection flow: 197 cm³/sec- Injection volume: 251 cm³- Spec. injection pressure: 1.286 bar- Spec. injection pressure increased: 2.029 barClamping unit:- Clamping force max.: 4,000 kN- Clamping platens: 1,400 x 1030 mm- Opening stroke: 954 mm- Max. platen distance: 1,520 mm- Ejecto ...

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

clamping force: 4200 kNinjection volume: 572 - 1716 cm³screw diameter: 90 mmplaten size: 1040 x 1040 mmclosing stroke: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 kN

Inv. Num. : 7219 Type: 100-380 AX Producer: Krauss Maffei Created: 2010 Parameters: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cc Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 410 mm Opening the mold: 350 mm Operating pressure: 1860 bar Machine length: 4950 mm Machine width: 1700 mm Machine height: 2000 mm Injection weight: 5150 kg

clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...

Inv. Num. : 7181 Type: ALLROUNDER 375 V 500 Producer: Arburg Created: 2012 Parameters: Duty cycle: 26913 h Hours: 17470 h Clamping force: 500 kN

clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

clamping force: 4200 kNinjection volume: 1212 /292 cm³screw diameter: 70 /15 mmplaten size: 1200 x 1100 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1:- Screw diameter: 70 mm- injection volume: 1.112 cm³- weight: 880 ginjection unit 2:- Screw diameter: 15 mm- injection volume: 292 cm³- weight: 190 gClamping unit:- Clamping force: 1200 kN- Centring: 160 mm- Platen size: 1200 x 1100 mm- Mould size: 810 x 710 mm- Mould thickness min.: 380 mm- Mould thickness max.: 940 mm- 4 & 4 Cascades- 4x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 192 kW- Dimensions L/W/H: appr ...

Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg

clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg

clamping force: 800 kNinjection volume: 177 cm³screw diameter: 35 mmplaten size: 580 x 580 mmCondition: used,Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400- Internat. Size specification: 800 - 400injection unit:- Screw diameter: 35 mm- L/D - ratio: 20D- Injection volume: 177 cm³- Injection pressure: 2387 bar- Cylinder heating: 8,8 kWclamping unit:- Clamping force: 800 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 580 x 580 mm- Clear column distance: 400 x 400 mmTotal machine:- Oil tank filling: 220 ltr.- Pump capacity: 15 kW- Voltage: 3x 400V, 50 Hz, N, PE- total power: 23,8 kW- Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm- Weight without  ...

Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP

clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min-  ...