We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 703)
used
A lifting-tilting device for loading trolleys made of stainless steel is sold Year of construction 2018 Max. load capacity up to 300 kg The plant is in very good condition and has been dismantled Price from stock 4000.-€ net
used
Trolley dimensions: 920x910x1950mm, connected load: 24kW, length: 1560mm, height: 2560mm, with documentation, a few years ago the electrics were completely overhauled.
used
Piston Filling Machine/Sausage Filling Machine/Piston Filler Manufacturer: FREY Type: KOMPAKTA 2-30 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casing. Particularly gentle filling with a clear filling pattern. Equipment: 30 litre filling volume Machine solid stainless steel Speed, rev speed and break length can be infinitely selected Level indicator, unit counter, number of units switch-off Serving Addition 1st Serving Portioning range 5 - 10,000 g Portioning speed up to 250 portions/min. Filling cylinder with a capacity of approx. 30 litres, solid stainless steel with sliding lining Piston made of high-quality, wear-resistant plastic Connected load 3.70 kW Three-phase 400 volts, 50 Hz, 3 phases LCD3 c ...
used
There are two identical cutting machines available, weight: 90kg, with documentation.
used
Used vacuum filler HANDTMANN, type: VF 628 with lifting device -partially overhauled- - for filling, portioning and twisting meat or dough products - Microcomputer controller PCK-4 - New colour display - Funnel divisible - with lifting device - Filling capacity: up to 6,000 kg/h - Maximum filling pressure: up to 72 bar General overhaul - New conveyor curve - new sprocket - Lifting device remounted - new chain - all bearings new The machine is in very good condition. Viewing and test run are possible by arrangement.
used
Capacity: 1000l, controls: variotronic 1, was maintained regularly.
used
DMS DF25C Piston Filler used Machine was built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in good condition, but should still be thoroughly cleaned before use Video about test run available
used
Cutting capacity: 130 cuts/min, operating pressure: 7-10bar, connected load: 19kW, length: 1260mm, width: 2059mm, height: 1845-1895mm, weight: 1.5t, with documentation and frame for the molds, an on-site inspection is possible, but not under power.
used
Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: ...
used
Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible.
used
Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 220-240 Volt / 50/60 Hz /1 A Year of construction: 2016 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493
used
Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.
used
Vacuum machine KOMET PlusVac 21 Specifications: Type: PlusVac 21 400 Volt / 50/60 Hz / 0.75 kW Total dimensions: H/D/W 100 x 65 x 50 cm Weight: approx. 65 kg Year of construction: 2004 Equipment: Dimensions welding chamber: H/W/D = 175 x 430 x 505 mm Welding length: 420 mm 20m³h Busch Vacuum Pump Plexiglass lid with shop window and curvature including 2 inserts Function checked condition see original pictures.
used
Hopper capacity: 250l, length: 2100mm, width: 1300mm, height: 3100mm.
used
Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 2000 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call. 03423-706493
used
Max. output: 1,2t/h, length: 2620mm, width: 1180mm, height: 1680mm, weight: 1t, with trolley.
used
Fomaco FBM 1000 Brine mixer Condition: Excellent Designed as an additional and essential tool for Fomaco brine injectors to mix ingredients. With this brine mixer, the process of mixing ingredients is very smooth and quick with spectacular results at output. The mixer automatically fills the tank with water to the desired level, and the operator only has to add the dry ingredients into the hopper. Brine mixing capacity: 1000 liters Tank volume: 40 liters Voltage: 3 x 400 V \ 50 Hz Dimensions (LxWxH): 2215 x 1940 x 2235 mm.
used
Connected load: 13kW, six additional belts are available as spare parts.
used
Used autoclave ASCA with 340 liters capacity -Refurbished- - 12 months warranty - for sterilizing, preserving, pasteurizing, cooking, curing, and maturing - Compl. made of high-quality stainless steels - Lid with quick-release fastener - Equipped with all safety-related equipment - Latest requirements of the valid Pressure Vessel Ordinance - All safety-related equipment, such as safety valve, pressure gauge, overheating protection, steam release valve, safety outlet valve, etc. installed - Subjected to construction and pressure testing by TÜV, certificates are enclosed - Fully automatic control by F-value controller including operating temperature, core temperature, F-value control, preselection and operating time clock Specifications: - Capacity: approx. 340 litres - Heating: Gas via gas blower burner - Operating pressure: up to 2.5 bar - Temperature range: up to 13 ...
used
Output: 3000l/h, pasteurizing process: flash pasteurizing.
used
Used autoclave ASCA 215 liters -refurbished- - 215 litre boiler - electrically heated - Completely overhauled - incl. 2 baskets - incl. pressure test and certificates as well as certificates will be handed out - Condition: Very good, ready for immediate use - 6 months warranty - Delivery time: 1 week after order order Due to the high working pressure and temperatures, we are subject to the Pressure Equipment Ordinance. As a result, our devices are always overhauled and approved by experts. The device is in pristine condition and ready for immediate use. Viewing and test run are possible by arrangement.
used
Working height: 900mm, rotational speed: 1475/min, including documentation, machine was not used and is still in the original packaging.
used
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
used
Marel ValueSpray was specifically designed for the in-line wet marinating of portioned and fragile meat, poultry and fish products, with an accurate pickup and uniform distribution of marinade on coarse pieces.
used
Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.
used
Compressed air supply: 4bar, power: 8.5kW.
used
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
used
Knife roller width: 500mm, number of knifes per roller: 59, length: 1200mm, width: 720mm.
new
Hydraulic fish block shredder for frozen fish blocks with cross section 350x100 mm. Design: completely in stainless steel Operating pressure: 140 bar Speed: 50 rpm Oil consumption: 40 l/min. Dimensions: 1002 x 417 x 1148 mm Weight: 150 kg
used
There are two processing conveyors available which are self-constructed, they are in good condition, suitable for pork and beef.