We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 207)
used
Inv. Num. : 5133 Type: ACTIVA/1-48 Producer: STEFANI Created: 2001 Parameters: Edge thickness: 0.4-16 mm Part thickness: 10-60 mm Minimum edge length in slats: 260 mm Minimum length of solid plywood: 260 mm Compartment capacity: 1.6 kg Drawer capacity: 8 kg/h Space for mounting the device: 1270 mm The machine is in good condition.
used
Edge banding machine, Manufacturer: HOLZ-HER, Type: Sprint 1317-2, Year of manufacture: 2002, Serial No.: 135/0-209, Operating pressure: 6 bar
used
Key data: 1 mm
Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well ...
used
single-sided edge banding machine, manufacturer: HOMAG, type: KL 79/A20/S2, year of manufacture: 1999, serial no.: 0-200-25-5272, edge thickness 0.4 - 20 mm, workpiece thickness 12 - 60 mm, control HOMAG Homatic NC 21, banding unit, 2 cross-cut units, 2 form milling units, type FK 13, groove unit, profile scraper blade, surface scraper blade, 3 grinding units, workpiece return LIGMATECH ZHR 15, safety fence system, control cabinet, cabinet system, 8-door, contents: machine accessories, set-up tools
used
Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.
used
CNC double-end tenoner, manufacturer: TORWEGGE, type: H 632, year of manufacture: 1999, serial no.: 80110039, 2 milling/grooving units, control with operator panel SIEMENS Simatic OP 27, transfer belt conveyor belt, L approx. 6,000 mm, (hammer bid is subject to reservation, total bids 334-350 or collective bid of item 333 will be compared after the auction ends)
used
Edge gluing machine for 20 mm solid wood edges. Cartridge system, cross-cut saw, flush milling. Ready for demonstration from the location. Very good condition.
used
double-sided edge processing line, manufacturer: IMA, type: Combima PU/II/R75/1220/F/V/R3, year of manufacture: 1999, serial no.: 13286, control IMA Imatronic 100, working width max. approx. 1,500 mm, 1x milling, 2x form milling, mould gluing unit, 2x cross-cutting unit, flush milling unit, mould scraper blade, groove unit, 2 polishing units, outlet roller conveyor, L approx. 6,000 mm, transition bridge 8 stages, (award is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be accepted after expiry of the Auction)
used
Model UNIKAT 203 up to 20 mm solid edge, caps, milling, rounding and chamfering unit
used
CNC gluing station, manufacturer: MAW / NOTTMEYER, year of manufacture: 1999, serial no.: 80560002, multi-spindle drilling unit, 11 drilling spindles, pitch approx. 32 mm, pneum. Clamping table, gluing unit, glue pump WIWA, controlled stop system, panel transport system, PLC control with operator panel, Fabr. Siemens, type Simatic OP 27, infeed belt conveyor belt, aluminium transition bridge, (hammer bid is conditional, sum of bids 334-350 or collective bid of item 333 will be compared after the auction ends)
used
Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.
used
Edge processing line, manufacturer: HOMAG, type: KFR 10/47/PU, year of manufacture: 1995, serial no.: 0-202-25-3100, consisting of: infeed table, type TB 10/25/20/R, serial no. 3100, Aggregate equipment: scoring saw, 3 jointing cutters, 2 chippers, 2 edge magazines, 2 glue units, type Q34, 2 radiant heaters, 2 cross-cut units, 2 flush milling units, 4 form milling units, 2 groove units, multifunctional blade, 3 surface/radius scrapers, 2 polishing units, discharge table, workpiece return LIGMATECH ZHR30/R/295, year of manufacture: 2011, serial no. 6276, 3 belt conveyor belts approx. each 1,000x80x110 cm, control HOMAG Homatic NC 30, control cabinets, safety fence system, approx. 10 running metres. Heavy-duty shelving, 4 levels, Contents: Edge material, Cabinet system, 14-door, Contents: Machine accessories, Tools, Set-up tools
used
Hot air moulded part edge banding machine, pre-coated edges, Roller separation, stencil preference, second blower for edge heating.
used
Working width: 1300mm, roller diameter: 185mm, max. opening height: 100mm, working height: 800mm, power: 0.37kW.
used
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
used
ID-Nr. 1-056-11-0400
used
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
used
IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition
used
Edge gluing machine
used
workpiece return Brand: Ligmatech Type: ZHR 15/XX/RE Year: 1995 for right machine
used
Edge gluing machine - see pictureNext:Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures
used
Post IMA Height: 980 mm with Motor 4,4 kW Motor shaft 35 mm diameter Inner thread M16 left Outer thread 35x1,5 right Price: not reconditioned, from stock Other version available on request
used
used
various pressure zones IMA - from stock - price on request
used
Hebrock Euro 2000 Edges up to 5mm striped fabric Granule Hot Melt Glue Basin heated inlet ruler Roller capping pneumatic 0.2 - 3 mm Saw capping rigid 90° - combi milling unit flush + radius Chassis Dimensions 2800 x 1400 x 1400 mm Weight approx. 550 kg Machine is currently still in use ex location NET € 3.200,00
used
Flat scraper IMA Type: 08.50 Price on request
used
Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Precision cutting unit IMA Type: 08.376
new
2000 Leimo Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The glue press from Bavaria Universally applicable Precise and angular accuracy Operated by a user G&FE-LEIMO options: 1 Holder G&FE-VP200-NL
used
Grooving unit IMA Type: 08.181 - only grooving from side