
스 퍼용 측정 및 시험기-베벨 및 웜 기어
경매인증된 판매자
입찰가¹(부가세 별도)
판매자에게 직접
290 €
1 / 1
기술 데이터
· ID 170487696스 퍼용 측정 및 시험기-베벨 및 웜 기어
- 입찰가¹(부가세 별도)
- 290 € (netto)
- 시작가
- 290 € (부가세 별도)
- 경매 종료 시각
- 경매 종료 일시: 07.12.2026 – 15:28 CET.
- 위치
- 63791 Karlstein
¹ 마지막으로 보고된 상태이며, 경매 회사의 정보가 기준입니다.
Identifikation
품목 번호0867c123-c045-431b-b8b1-908819fef53d
Technik
수량1
설명
H&H Höcherl & Hackl PL1512 electronic DC load for testing, development, and laboratory applications. The device is defined and reproducible to load DC sources such as power supplies, batteries, chargers, DC/DC converters, and power electronics.
With a continuous load capacity of 1,500 W, up to 2,700 W for short periods, and a maximum of 120 V DC and 80 A, the load is also suitable for high-power testing tasks. Front-facing operation is via digital voltage and current displays with separate adjustment controls.
Constant current, constant resistance, and dynamic operation are supported, along with internal modulation functions for switching between two load values. For automated test benches, RS-232, GPIB, system bus, and an analog I/O interface are available. The load input is mounted on massive high-current connections at the back of the device.
TECHNICAL DATA
Manufacturer: H&H Höcherl & Hackl GmbH
Type: PL1512
Device type: electronic DC load
Continuous power: 1,500 W
Short-term power: max. 2,700 W
Max. input voltage: 120 V DC
Max. load current: 80 A
Min. input voltage at rated current: approx. 1.4 V
Resistance range: from approx. 0.06 Ohm
Rise and fall time: approx. 75 μs
Operating modes: Constant current, constant resistance, I/O operation, dynamic operation
Interfaces: RS-232, GPIB, SYS-BUS, Analog I/O
Mains connection: 115 / 230 V AC
Mains frequency: 50/60 Hz
Power consumption: approx. 60 VA
Cooling: temperature-controlled fan cooling
Design: 19 inches, 2 U.
Dimensions: approx. 444 x 89 x 390 mm
Weight: approx. 16 kg
All measurements and weights are approximate values.
Auction-ID: A1-52443-427
With a continuous load capacity of 1,500 W, up to 2,700 W for short periods, and a maximum of 120 V DC and 80 A, the load is also suitable for high-power testing tasks. Front-facing operation is via digital voltage and current displays with separate adjustment controls.
Constant current, constant resistance, and dynamic operation are supported, along with internal modulation functions for switching between two load values. For automated test benches, RS-232, GPIB, system bus, and an analog I/O interface are available. The load input is mounted on massive high-current connections at the back of the device.
TECHNICAL DATA
Manufacturer: H&H Höcherl & Hackl GmbH
Type: PL1512
Device type: electronic DC load
Continuous power: 1,500 W
Short-term power: max. 2,700 W
Max. input voltage: 120 V DC
Max. load current: 80 A
Min. input voltage at rated current: approx. 1.4 V
Resistance range: from approx. 0.06 Ohm
Rise and fall time: approx. 75 μs
Operating modes: Constant current, constant resistance, I/O operation, dynamic operation
Interfaces: RS-232, GPIB, SYS-BUS, Analog I/O
Mains connection: 115 / 230 V AC
Mains frequency: 50/60 Hz
Power consumption: approx. 60 VA
Cooling: temperature-controlled fan cooling
Design: 19 inches, 2 U.
Dimensions: approx. 444 x 89 x 390 mm
Weight: approx. 16 kg
All measurements and weights are approximate values.
Auction-ID: A1-52443-427

