본문으로 건너뛰기

FEINTOOL FB ONE 11000 유압 파인 블랭킹 프레스

독일2023ID 170329602

독일2023ID 170329602

중고인증된 판매자
가격 요청 판매자에게 직접

기술 데이터

· ID 170329602
출처: 판매자 제공 정보

유압 파인 블랭킹 프레스

상태
중고
제조 연도
2023
위치
9016 St. Gallen

Identifikation

제조사FEINTOOL
모델FB ONE 11000
품목 번호50429

Technik

수량1

설명

CONTROLS
  PC controller BECKHOFF
PRESS DESIGN
  drive system: servohydraulic
  frame design: H-frame, tie rod
  quick die change system: yes
  feedstock transport direction: left to right
SLIDE
  total force (nominal): 1100 to
  stroke: 130 mm
  stroke rate (max.): 60 /min
COUNTER RAM
  nominal force: 330 to
  stroke: 40 mm
V-RING
  nominal force: 500 to
  stroke: 40 mm
TOOL DIMENSIONS
  lower table (left-right): 960 mm
  lower table (front-back): 960 mm
  upper table (left-right): 960 mm
  upper table (front-back): 960 mm
  shut height max.: 470 mm
OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max.: 500 mm
  sheet thickness max.: 16 mm
  coil weight max.: 8 to
  feedstock transport direction: left to right
COIL CHAIR
  coil weight max.: 8 to
  stroke: 700 mm
DECOILER
  coil weight max.: 8 to
  max. diameter of coil: 1800 mm
  mandrel expansion range from: 470 mm
  mandrel expansion range up to: 530 mm
LEVELLER UNIT
  sheet width max.: 500 mm
  sheet width (min): 80 mm
  sheet thickness max.: 16 mm
  sheet thickness min.: 1.5 mm
  material cross section max. (450 N/mm2): 3510 mm²
  number of leveller rolls: 17
  integrated feed function: yes
  intermediate clamp release: yes
  cleaning device for leveller rollers: yes
CROP SHEAR
  cutting force: 800 kN
ELECTRICAL SPECIFICATIONS
  mains power supply: 350 kVA
  mains voltage: 400 V
  mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
  total weight approx.: 75350 kg
Absolutely mint condition: just 3300 running hours, 700000 strokes
Special equipment fineblanking press:
+ block hydraulics for 4th and 5th force. High pressure 30-270 bar.
+ mechanical reamers (without tool-bound sliders)
+ additional operating mode cutting without counter-holder and V-ring
+ additional operating mode manual insert mode
+ 2 blast air circuits with 6 connections each
+ Additional tool monitoring
+ RAZIOL roller belt lubrication system with 2 reservoirs
+ Interface for monitoring the cooling system
- the scrap conveyor (visible on photos) is not part of the scope
ARKU single reel with loading chair:
+ 2 pressure arms for high-strength coil material
+ Coil guidance via conical rollers
+ Automatic coil centre positioning
ARKU feed straightening machine:
max. straightening cross-section at 600 N/mm2: 3510 mm2
+ Synchronised drive of the straightening rollers
+ Hardened and ground straightening rollers
+ Servo-hydraulic leveller gap control
+ Straightening roller quick-change system
+ intermediate roller release
+ Measuring wheel for feed control

이 기계 문의하기

문의는 이 기계의 판매자에게 직접 전달됩니다.

필수 항목에는 (별표) 표시가 되어 있습니다.

추가 정보(선택 사항)
'입력 정보 30일간 저장' 안내
고객님의 연락처 정보(호칭, 이름, 이메일, 전화, 회사, 도로명, 우편번호, 도시, 국가 및 '딜러' 여부)는 다음 문의 시 양식이 미리 채워지도록 이 브라우저의 쿠키에 30일간 저장됩니다. 체크를 해제하고 문의를 보내시면 저장된 정보가 삭제됩니다.

보내시면 문의가 판매자에게 전달됩니다. 자세한 내용은 다음을 참조하십시오: 개인정보 처리 안내.

유사 기계

문의: FEINTOOL FB ONE 11000 유압 파인 블랭킹 프레스

ID: 170329602

가격 요청