인증된 딜러
상세 정보 보기
Exeron HSC 300/3 CNC
중고인증된 판매자
가격 요청
판매자에게 직접
1 / 8
기술 데이터
· ID 169926171중고 기계
- 상태
- 중고
- 제조 연도
- 2019
- 위치
- Slovakia
Identifikation
제조사Exeron
모델HSC 300/3
품목 번호9251306
Technik
수량1
설명
high-speed CNC machining center
Type: HSC 300/3
Manufacturer: Exeron
Year: 2019
Control: Heidenhain iTNC 640
Spindle hours: 9500
X: 525 mm
Y: 340 mm
Z: 355 mm
Max spindle speed: 42000 rpm
Max table load: 500 kg
Clamping table size: 400 x 470 mm
HVC140 HSK-E40 milling spindle – S1/S6 40% milling power: 10 kW/13 kW. Ceramic ball bearings with minimal oil and air lubrication.
Tool magazine with 16 positions for HSK-E40 tools, with a diameter of up to 16 mm and a maximum length of 75 mm.
Blum laser tool measurement, located on the left side, including a tool damage control system.
Rotating tools with a diameter of 0.2 to 16 mm are measured directly in the machine working area.
The minimum tool length is 45 mm.
Graphite extraction system including preparation of the machine for extraction.
Air flow rate approx. 1,400 m³/h.
Motor power 2.2 kW, noise level approx. 73 dB(A).
Residual dust content in the exhaust air is max. 0.5 mg/m³. This value is approximately 15 times lower than the permissible MAK limit.
Sound absorber for the L-CUT system. Reduction of the sound pressure level by approximately 9 dB(A).
Heidenhain remote control for manual operation of the machine, equipped with setting functions, electronic handwheel and activation button.
Hydac cooling system for the spindle. Automatic lubrication system. Additional LED lighting of the working area. Oil mist lubrication unit. System language: English.
Renishaw OMP400 infrared measuring probe with HSK-E40 holder.
Machine in good condition, fully functional, under power
Find more here - .ucymachines/
Contact us at - sales@ucymachines
Type: HSC 300/3
Manufacturer: Exeron
Year: 2019
Control: Heidenhain iTNC 640
Spindle hours: 9500
X: 525 mm
Y: 340 mm
Z: 355 mm
Max spindle speed: 42000 rpm
Max table load: 500 kg
Clamping table size: 400 x 470 mm
HVC140 HSK-E40 milling spindle – S1/S6 40% milling power: 10 kW/13 kW. Ceramic ball bearings with minimal oil and air lubrication.
Tool magazine with 16 positions for HSK-E40 tools, with a diameter of up to 16 mm and a maximum length of 75 mm.
Blum laser tool measurement, located on the left side, including a tool damage control system.
Rotating tools with a diameter of 0.2 to 16 mm are measured directly in the machine working area.
The minimum tool length is 45 mm.
Graphite extraction system including preparation of the machine for extraction.
Air flow rate approx. 1,400 m³/h.
Motor power 2.2 kW, noise level approx. 73 dB(A).
Residual dust content in the exhaust air is max. 0.5 mg/m³. This value is approximately 15 times lower than the permissible MAK limit.
Sound absorber for the L-CUT system. Reduction of the sound pressure level by approximately 9 dB(A).
Heidenhain remote control for manual operation of the machine, equipped with setting functions, electronic handwheel and activation button.
Hydac cooling system for the spindle. Automatic lubrication system. Additional LED lighting of the working area. Oil mist lubrication unit. System language: English.
Renishaw OMP400 infrared measuring probe with HSK-E40 holder.
Machine in good condition, fully functional, under power
Find more here - .ucymachines/
Contact us at - sales@ucymachines
이 기계 문의하기
문의는 이 기계의 판매자에게 직접 전달됩니다.
