본문으로 건너뛰기

BIESSE Skipper V31 수치 제어 머시닝 센터

벨기에2016ID 170440980

벨기에2016ID 170440980

중고인증된 판매자
부가세 별도 가격
34.000 €
문의 보내기 판매자에게 직접

기술 데이터

· ID 170440980
출처: 판매자 제공 정보

수치 제어 머시닝 센터

부가세 별도 가격
34.000 € netto
상태
중고
제조 연도
2016
위치
3011 Rotterdam

Identifikation

제조사BIESSE
모델Skipper V31
품목 번호GM-000059

Technik

수량1

설명

Dimensions: L 2430 x W 2070 x H 2600 mm
Group of holes in vertical direction: 10
Group of horizontal holes X – Y: 6 + 6
Machined panel size in X: 200 - 2500 mm
Machined panel size in Y: 70 - 900 mm
Machined panel size in Z: 10 - 70 mm
Made in: Italy
Milling spindle: 4,5 kW
Software: BiesseWorks
Spindle speed: 18000 rpm
Spindle taper: ISO-30
Total used power: 10 kW
Vector speed: X 25, Y 50, Z 25 m/min
Weight: 1300 kg

One machine, drilling and routing in a single vertical station. This used Biesse Skipper V31 from 2016 processes single panels and small batches at production speed, using a fraction of the floor space a horizontal machining centre demands. It is located in Belgium and available immediately.
Full specifications are listed in the table above. What follows is what those numbers mean on your shop floor.
What this machine does for your production
The Skipper V31 works vertically. The panel stands up, the automatic gripper takes it, and drilling, routing and grooving happen in one pass — no nesting preparation, no vacuum pod layout, no re-clamping between operations.
That changes three things you feel every single day:
Setup time collapses. Variable panel sizes no longer mean a new fixture setup. Load, run, next.
Handling time drops. The air cushion and pressure rollers move panels with almost no operator effort, and the gripper positions them for you.
Floor space stays free. The vertical concept releases square metres that a horizontal centre of comparable capability would consume.
With an 18,000 rpm ISO-30 spindle and a 4.5 kW router, edges come off clean enough to skip rework. Six plus six horizontal drilling groups in X and Y, ten vertical spindles and an integrated Ø120 mm groove saw cover the boring patterns, dowel holes, hardware fixings and back-panel grooves that make up the bulk of cabinet work — without a tool change between them.
Is this machine right for you?
You will get the most out of a Skipper V31 if you recognise your own workshop here:
Furniture manufacturers running high-speed vertical drilling and routing
Kitchen and cabinet producers with constantly changing panel dimensions
Interior fit-out and contract furniture companies working to short lead times
Panel processing workshops where floor space is the real constraint
Manufacturers who need CNC flexibility without committing to a large machining centre
If your orders arrive as batch sizes of one to twenty, and your bottleneck is changeover rather than cutting time, this machine was engineered for exactly that situation.
Skipper V31 compared to the alternatives
Versus a horizontal CNC machining centre: significantly smaller footprint, faster setup across varying panel sizes, less material handling per part, and a lower overall investment when drilling and routing are your primary operations rather than complex 3D work.
Versus a standard point-to-point boring machine: integrated routing capability and a broader range of machining operations from one station — a genuine step up in flexibility, not just in speed.
For a manufacturer balancing flexibility, throughput and square metres, that combination is difficult to match at this price level.
Equipment included
Integrated groove saw unit, Ø120 mm
Automatic panel clamping with gripper
Pressure rollers
Air cushion panel support
Typical applications
Cabinet side drilling and routing
Shelf and partition processing
Dowel and hardware hole drilling
Back panel grooving
Small batch and custom furniture production
Interior component manufacturing
The Skipper V31 performs best where flexibility, quick turnaround and repeatable precision matter more than raw volume.
About Biesse
Biesse is one of the worlds leading manufacturers of advanced woodworking machinery, recognised internationally for innovation, reliability and precision engineering. Its machines run in professional furniture workshops and industrial woodworking plants across every continent. The Skipper series represents Biesses specialist expertise in vertical CNC drilling and routing technology — and parts, tooling and technical support for the platform remain widely available.
Availability and next steps
This machine is available now and can be inspected in operation in Belgium, by appointment. Seeing it cut before you commit removes the guesswork that makes used machinery purchases feel risky.
Enquiries from woodworking manufacturers and industrial buyers are welcome. Additional technical detail, inspection scheduling and transport coordination can all be arranged on request.
Send your enquiry today and we will confirm an inspection slot. One unit available.
Disclaimer
Information may be inaccurate and subject to change without notice. Details in this classified advertisement are indicative — verifying specifications is advised. Bidding is subject to specific circumstances and negotiation terms. Ex Works prices; machine located at site. Dismantling and decommissioning not included. Basic packaging provided if required for transport.

이 기계 문의하기

문의는 이 기계의 판매자에게 직접 전달됩니다.

필수 항목에는 (별표) 표시가 되어 있습니다.

금액 입력은 선택 사항입니다. '가격 제안 보내기' 창에서 메시지만으로 제안을 보내실 수도 있습니다.
추가 정보(선택 사항)
'입력 정보 30일간 저장' 안내
고객님의 연락처 정보(호칭, 이름, 이메일, 전화, 회사, 도로명, 우편번호, 도시, 국가 및 '딜러' 여부)는 다음 문의 시 양식이 미리 채워지도록 이 브라우저의 쿠키에 30일간 저장됩니다. 체크를 해제하고 문의를 보내시면 저장된 정보가 삭제됩니다.

보내시면 문의가 판매자에게 전달됩니다. 자세한 내용은 다음을 참조하십시오: 개인정보 처리 안내.

유사 기계

문의: BIESSE Skipper V31 수치 제어 머시닝 센터

ID: 170440980

부가세 별도 가격34.000 €문의 보내기