WEHRMANN Combima /K/I/R80/1260/V 例として、furni用のダイレクトポストフォームマシンの提供

single-sided direct postforming machine
Brand: Wehrmann
Type: Combima /K/I/R80/1260/V

Example offer direct postforming machine
Varied using for doors, worktops, furniture parts, curved caravan fronts, etc.

Technical data:
A single-sided throughfeed postforming machine for the
postforming and postfolding process, for processing curved
workpieces in caravan construction. For workpieces to be
profiled made of wood/wood materials with laminate
(CPL,HPL) as surface material. The laminate protruding
for the postforming process is located in the machine
on the underside of the workpiece and is formed
from the bottom to the top.

Technical data Machine
Constant workpiece projection
from the chain conveyor: from approx. 35 mm
Throughput width min.: 130 mm ( only for straight parts )
Workpiece length in
feed direction min.: 1,000 mm
Basic height: 940 mm (upper edge of chain conveyor)

The workpiece is transported
by means of the R75 precision roller chain with height-adjustable top pressure.
upper pressure. The low-maintenance precision roller chain
has 75 mm wide and 85 mm long rubber-coated chains.
Due to the 80 mm wide compound V-belt of the top pressure
the workpieces are reliably guided.
Special version of the top pressure
for fitting to different workpiece radius.

Left-hand machine:
fence side left in machining direction

1 fence ruler
on the fixed machine side

Feed speed:
max. V=6-30 m/min.

Mains voltage:
3/N/PE, 400/230 V, 50 Hz,

Control voltage:
24 V DC / 230 V AC

Top pressure:
motorised height adjustment

Release agent via spray nozzle from above

Front of stand:
Pre-milling unit swivelled approx. 3 degrees
with 1 horizontal motor, 400 V, 12.5 KW

Stand rear side:
Pre-finishing/milling unit
with 1 motor horizontal, 400 V, 12,5 KW

Front side of upright:
Relief cutting for internal profiles
with 1 motor horizontal 400 V, 6,6 KW

Rear side of upright:
Milling unit for internal profiles
with 1 horizontal motor 400 V, 6.6 KW

Front side of upright:
Flattener swivelled approx. 120 degrees
with 1 horizontal motor 400 V, 6.6 KW

Rear side of upright:
Radius milling approx. 100 degrees swivelled
with 1 motor horizontal 400 V, 6,6 KW

Pointing unit
with 1 motor hanging 400 V, 1 KW, HSK 25

Free space

Heating zone

PU glue application of the gusset bead in the
Spotting area
By means of NORDSON - drum melter

PU-glue application onto the surface

Lubricant spraying device from below

Profile pressure section with firmly mounted glide shoes
for 2 profiles

Cooling zone via glide shoe technology
Air on/off control

Cleaning via spray nozzle from below

Fibre unit 08.055 from above
with one motor 660 W, 400 V, 200 Hz

Buffing unit from above

2 grooving units

Part support with a double roller rail
-rubberised-

Postfolding
Aggregate for bevelling 08.0587
With 1 motor for fine milling from above

Aggregate for bevelling 08.0587
With 1 motor for fine milling from above
With 1 motor for fine milling from above

Aggregate for bevelling 08.0587
With 1 motor for fine milling from above
With 1 motor for fine milling from above

2 Nordson bead application heads

1 Nordson PUR flushing system

Note:
The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.