コンテンツへスキップ

BIESSE Skipper V31 数値制御マシニングセンター

ベルギー2016ID 170440980

ベルギー2016ID 170440980

中古認証済み出品者
税抜価格
34.000 €
問い合わせを送信 出品者に直接

技術データ

· ID 170440980
出典:出品者の情報

数値制御マシニングセンター

税抜価格
34.000 € netto
状態
中古
製造年
2016
所在地
3011 Rotterdam

Identifikation

メーカーBIESSE
型式Skipper V31
管理番号GM-000059

Technik

数量1

説明

Dimensions: L 2430 x W 2070 x H 2600 mm
Group of holes in vertical direction: 10
Group of horizontal holes X – Y: 6 + 6
Machined panel size in X: 200 - 2500 mm
Machined panel size in Y: 70 - 900 mm
Machined panel size in Z: 10 - 70 mm
Made in: Italy
Milling spindle: 4,5 kW
Software: BiesseWorks
Spindle speed: 18000 rpm
Spindle taper: ISO-30
Total used power: 10 kW
Vector speed: X 25, Y 50, Z 25 m/min
Weight: 1300 kg

One machine, drilling and routing in a single vertical station. This used Biesse Skipper V31 from 2016 processes single panels and small batches at production speed, using a fraction of the floor space a horizontal machining centre demands. It is located in Belgium and available immediately.
Full specifications are listed in the table above. What follows is what those numbers mean on your shop floor.
What this machine does for your production
The Skipper V31 works vertically. The panel stands up, the automatic gripper takes it, and drilling, routing and grooving happen in one pass — no nesting preparation, no vacuum pod layout, no re-clamping between operations.
That changes three things you feel every single day:
Setup time collapses. Variable panel sizes no longer mean a new fixture setup. Load, run, next.
Handling time drops. The air cushion and pressure rollers move panels with almost no operator effort, and the gripper positions them for you.
Floor space stays free. The vertical concept releases square metres that a horizontal centre of comparable capability would consume.
With an 18,000 rpm ISO-30 spindle and a 4.5 kW router, edges come off clean enough to skip rework. Six plus six horizontal drilling groups in X and Y, ten vertical spindles and an integrated Ø120 mm groove saw cover the boring patterns, dowel holes, hardware fixings and back-panel grooves that make up the bulk of cabinet work — without a tool change between them.
Is this machine right for you?
You will get the most out of a Skipper V31 if you recognise your own workshop here:
Furniture manufacturers running high-speed vertical drilling and routing
Kitchen and cabinet producers with constantly changing panel dimensions
Interior fit-out and contract furniture companies working to short lead times
Panel processing workshops where floor space is the real constraint
Manufacturers who need CNC flexibility without committing to a large machining centre
If your orders arrive as batch sizes of one to twenty, and your bottleneck is changeover rather than cutting time, this machine was engineered for exactly that situation.
Skipper V31 compared to the alternatives
Versus a horizontal CNC machining centre: significantly smaller footprint, faster setup across varying panel sizes, less material handling per part, and a lower overall investment when drilling and routing are your primary operations rather than complex 3D work.
Versus a standard point-to-point boring machine: integrated routing capability and a broader range of machining operations from one station — a genuine step up in flexibility, not just in speed.
For a manufacturer balancing flexibility, throughput and square metres, that combination is difficult to match at this price level.
Equipment included
Integrated groove saw unit, Ø120 mm
Automatic panel clamping with gripper
Pressure rollers
Air cushion panel support
Typical applications
Cabinet side drilling and routing
Shelf and partition processing
Dowel and hardware hole drilling
Back panel grooving
Small batch and custom furniture production
Interior component manufacturing
The Skipper V31 performs best where flexibility, quick turnaround and repeatable precision matter more than raw volume.
About Biesse
Biesse is one of the worlds leading manufacturers of advanced woodworking machinery, recognised internationally for innovation, reliability and precision engineering. Its machines run in professional furniture workshops and industrial woodworking plants across every continent. The Skipper series represents Biesses specialist expertise in vertical CNC drilling and routing technology — and parts, tooling and technical support for the platform remain widely available.
Availability and next steps
This machine is available now and can be inspected in operation in Belgium, by appointment. Seeing it cut before you commit removes the guesswork that makes used machinery purchases feel risky.
Enquiries from woodworking manufacturers and industrial buyers are welcome. Additional technical detail, inspection scheduling and transport coordination can all be arranged on request.
Send your enquiry today and we will confirm an inspection slot. One unit available.
Disclaimer
Information may be inaccurate and subject to change without notice. Details in this classified advertisement are indicative — verifying specifications is advised. Bidding is subject to specific circumstances and negotiation terms. Ex Works prices; machine located at site. Dismantling and decommissioning not included. Basic packaging provided if required for transport.

この機械について問い合わせる

お問い合わせはこの機械の出品者に直接届きます。

必須項目は (アスタリスク) で示されています。

金額の入力は任意です。「価格提案を送信」ダイアログでは、提案をメッセージのみで送信することもできます。
その他の情報(任意)
「入力内容を30日間保存する」についての注意
お客様の連絡先(敬称、氏名、メールアドレス、電話番号、会社名、番地、郵便番号、市区町村、国、および「販売店」の区分)は、次回のお問い合わせ時にフォームが入力済みとなるよう、このブラウザーの Cookie に30日間保存されます。チェックを外してお問い合わせを送信すると、保存された情報は削除されます。

送信すると、お問い合わせは出品者に転送されます。詳しくは次をご覧ください: プライバシーに関する情報.

類似の機械

お問い合わせ: BIESSE Skipper V31 数値制御マシニングセンター

ID: 170440980

税抜価格34.000 €問い合わせを送信