sheet metal working used for sale

Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco 60" x .187" x 50,000Lbs CTL Line Excellent conditions

sheet width: 1270 mmplate thickness: 3,0 mmdistance between columns: 1300 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788) Make: Herr Voss – Wysong Material: CR, HR, Stainless, Aluminum Material Width: 12″ – 72″ Material Thickness: .030″ – .135″ (-030 – .187″ 60″) Weight Capacity: 40,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Direction: L-R Speed: 200 feet per minute Entry L-Type Coil Car Make: Sauer Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Make: Wean Powered Hold Down Roll Sliding Base Pneumatic Brake Feed Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Herr Voss 6-Hi Precision Leveler Year New: 1999 Model: VKL-84/2.187/19/7/6-Hi Work Rolls Width: 84″ Work Rolls Diameter: 2.187″ Number of Work Rolls: 19 Motor: 150HP DC Drive Inc Jet Coder Adjustable Hump Table Size: 75″ x 12′ PVC Paper with Static Charge Ba ...

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 0,9 x 0,25 x 0,3 mweight: 0,025 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. sheet thickness: 2 mm steel Max. blank diameter: 750 mm Motorized drive via foot switch

sheet width: 2040 mmplate thickness: 3,0 mmdaylight opening: mmdistance between columns: 2100 mmwork height max.: mm: max. 135 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 2,2 trange L-W-H: 23,1 x 1,0 x 1,7 mFurnishing:- Bending angle preselection- Segmented tool- additional bending set- manual backgauge- DokumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

sheet width: 2000 mmplate thickness: 4,0 mmdistance between columns: 2050 mmroll diameter: 160 mmtotal power requirement: KWweight of the machine ca.: 2,75 tdimensions of the machine ca.: 3,6 x 1,2 x 1,3 mmSheet metal bending machine 3 rollersincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALIKO SP4200-220 220 t CNC hydraulic press brake was built in Finland in 2006. Specially designed and perfectly optimised for even the most intensive bending, the machine has 220 tonnes of press force and a slider with a stroke of 900 mm, enabling the efficient production of large, non-standard parts. All this, combined with a stable design and low energy consumption, makes the ALIKO CNC 220-4200 CNC press the best choice among other press brakes available on the market. The offer additionally includes adapters and carriages for removing the adapters. The total weight of the machine is 21500 kg. Technical parameters of the ALIKO SP4200-220 press brake - CNC controller: CYBELEC ModEva 10S (support of 18 different languages including Polish) - press force: 220 t (2200 kN) - maximum workpiece length: 4200 mm - slider stroke: 900 mm - maximum tool weight: 1500 kg - response time: 10 ...

: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sitec BSL1500 F1200 welder year 2002

: 50 (500) mm: 45 (500) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 80 x 9 (800) mmAxis diameter: 60 mmwork speed: 5,0 m/minTool diameter: 195 mmtotal power requirement: 3 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,9 x 1,2 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edgebander PB Engineering RIT 1200 - diam. 900

sheet width: 2070 mmplate thickness: 4 mmdistance between columns: 2100 mmdiameter of upper rolls: 140 mmtotal power requirement: KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser Salvagnini L5 FIBER 3 KLW Year 2011 with automatic stacker Unloading robots Visible in operation Available January 2024

sheet width: 610 mmplate thickness: 1,0 mmdistance between columns: 620 mmdiameter of upper rolls: 38 mmtotal power requirement: Handbetrieben weight of the machine ca.: 40 Kgdimensions of the machine ca.: 950 x 270 x 360 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

sheet width: 700 mmplate thickness: 2,0 mmdistance between columns: 750 mmdiameter of upper rolls: 76 mmtotal power requirement: ß,75 KWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 1,3 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Upper and lower roller driven, feed roller without drive- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

plate thickness: 4 mmblade length: 200 mmangle adjustable from - to: jede Seite 15 - 60 Gradtable surface area: 1000 x 780 mmtotal power requirement: 5,0 kWweight of the machine ca.: 0,9 tdimensions: 1,6 x 1,1 x 1,75 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3050 mm: 15-1000 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 30 kWweight of the machine ca.: 14,.5 tdimensions of the machine ca.: 4,0 x 4,0 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting angle adjustment- Cutting length adjustment- Cutting length limitation (time dependent)- Sheet thickness adjustment- Back gauge with clearance function- Cutting line lighting- Side stop- 3 pcs. support consoles- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg

weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

plate thickness: 2,5 mmroll diameter: 98 mmthroat: 160 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 550x1400x1500 mDelivered with:• manual version• 4 set of wheels• Foot control• Brake motor• Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.