presses used for sale

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 €: 1 : 20 to: 550 mm: 370 mm: 110 mm: 5 - 75 mm: 160 1/min: 187 x 143 mm: 35 mm: 38 mm: 185 mm: 225 mm: 225 mm: 1,5 kW: 1050 mm: 1250 mm: 2100 mm: 1150 kg2 V-guidesFront and side table shielding by safety doors2-hand control and foot pedalClamping plateThickness table and clamping plate 50/50 mmUser Manual in GermanCE Declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

: neu : ca. 8 Wochen ab Auftragse : Italien : 70 to: 4 mm: 920 mm: 500 mm: 180 mm: 12 - 120 mm: 50 - 80 1/min: 8 : 80 mm: 260 mm: 560 mm: 7,5 kW: 1225 mm: 1865 mm: 3060 mm: 7000 kgouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakeAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

: gebraucht : 2015 : 7290 : prompt, Zwischenverkauf v : Türkei : 21400 €: 40 to: 630 mm: 450 mm: 150 mm: 5 - 75 mm: 153 1/min: 415 x 275 mm: 68 mm: 40 mm: 230 mm: 280 mm: 4 kW: 1300 mm: 1700 mm: 2150 mm: 2950 kg8-fold ram guideClamping plateLight barrier protection2-hand control panel and foot pedalManual central lubricationUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renew ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 €: 1983.31 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for pressing PET bottles

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 119800 €: 160 to: 1100 mm: 700 mm: 210 mm: 15 - 110 mm: 60 1/min: 630x400 mm: 95 mm: 325 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 79600 €: 1615.88 €: 110 to: 900 mm: 540 mm: 180 mm: 14 - 114 mm: 60 1/min: 490x325 mm: 90 mm: 280 mm: 7,5 kW: 1870 mm: 1320 mm: 2800 mm: 5600 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of construction 2004 Hours 13265 Press force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable Setting 4-fold automatic Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 151600 €: 200 to: 1200 mm: 740 mm: 220 mm: 24 - 140 mm: 50 1/min: 950x600 mm: 100 mm: 390 mm: 15 kW: 2350 mm: 1700 mm: 3435 mm: 14900 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...

: gebraucht / neuwertiger Z : 2019 : 7191 : prompt, Zwischenverkauf v : Italien : 43200 €: 1 : 50 to: 800 mm: 450 mm: 11 - 110 mm: 60 - 100 1/min: 8 : 70 mm: 235 mm: 5,5 kW: 1330 mm: 1000 mm: 2650 mm: 5000 kgwith 8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationsafety light guard KeyenceAntivibrationspadsPEDALCOVER PLATE FOR HOLE IN THE TABLEuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data fo ...

Specifications Maximum pressure: 20 tons Press force: 2.6 kg/cm² Bale size: 1100 x 700 x 700 mm Bale weight: approx. 250 kg Power supply: 400V / 4kW Year of construction: 1995 Machine is fully functional, after technical supervision.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 67700 €: 1374.31 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7,5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baling press, make: Imabe, motor: 25 hp, bullet measurement: 800x800 mm. Semi-automatic side tying. Entrance mouth: 1,10x0,80. With electrical panel and mounted on multilink. Second-hand hydraulic press at the best price. Machinery checked and guaranteed by expert technicians Save money!

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74200 €: 1506.26 €: 80 to: 900 mm: 540 mm: 180 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 280 mm: 380 mm: 7,5 kW: 2010 mm: 1390 mm: 2750 mm: 5400 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler HSM VK 4212, built in 2013, including spare parts package Manufacturer: HSM Type: VK 4212 Year of construction: 2013 Hours: 17,321 Press force: 42 t Drive power: 22 kW Idle cycle time: 12.7 s Filling opening: 620 x 1140 mm (WxL) Capacity: 50 kg/m³: 9.05 t/h Bale size: 700 x 800 x 600-1200 mm Binding: 4-fold, automatic Transport dimensions: approx. 7,200 x 2,000 x 2,100 mm (LxWxH) Weight: approx. 6,300 kg Materials: paper, cardboard, die-cuts, foil

: neu : ca. 10 Wochen ab Auftrags : Italien : 100 to: 5 mm: 1000 mm: 630 mm: 180 mm: 15 - 140 mm: 45 - 70 1/min: 8 : 90 mm: 320 mm: 570 mm: 11 kW: 1320 mm: 2200 mm: 3080 mm: 10000 kg8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationfront protection by photocellsuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- Press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 6860 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

: neu : ca. 8 Wochen ab Auftragse : Italien : 250 to: 8 mm: 1400 mm: 800 mm: 250 mm: 23 - 220 mm: 25 - 50 1/min: 950x620 mm: 8 : 120 mm: 410 mm: 820 mm: 33 kW: 1600 mm: 2900 mm: 4250 mm: 25000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakeAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view-overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Bollegraaf HBC 100 A, built in 2001 Specifications: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Press force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg

: neu : 2024 : 7298 : prompt, Zwischenverkauf v : Türkei : 20100 €: 412.05 €: 1 : 10 to: 1.4 mm: 270 mm: 370 mm: 100 mm: 1 - 40 mm: 200 1/min: 4 : 35 mm: 25 mm: 160 mm: 180 mm: 0.75 kW: 1170 mm: 1180 mm: 1700 mm: 590 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barrierstwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOptions: vibrations pads € 132,- bolster plate € 220,-Photo shows the machine with optional bolster plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Presto HPK 50 HS, year of manufacture 2014 Manafacture: Presto Type: HPK 50 HS Year of construction: 2014 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg

: neu : 2024 : 7297 : prompt, Zwischenverkauf v : Türkei : 40200 €: 816.06 €: 1 : 40 to: 2.5 mm: 450 mm: 650 mm: 150 mm: 1 - 80 mm: 125 1/min: 4 : 75 mm: 40 mm: 225 mm: 300 mm: 4 kW: 1350 mm: 1370 mm: 2160 mm: 2100 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOPTION:Vibration pads € 192,--Bolster plate € 830,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 25700 €: 521.71 €: 15 to: 1.4 mm: 320 mm: 490 mm: 130 mm: 1 - 40 mm: 200 1/min: 4 : 40 mm: 30 mm: 200 mm: 215 mm: 1.5 kW: 1160 mm: 1180 mm: 1730 mm: 922 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barrierstwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.