Cab for mini excavator approx. 83cm x 100cm with windscreen wiper and opening front Slight paint chipping

Description: Carrying capacity 5 tApprox. Onsite Dimension. (l x w x h): 2,050 x 200 x 300 mm, weight approx.: 105 kg

various grippers/pliers in stock (see photos) each with adapter plates

Description: Carrying capacity 3000 kgApprox. Onsite Dimension. (l x w x h): 800 x 300 x 250 mm, weight approx.: 10 kg

Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Weight: approx. 2,800 kg 76 Chisel

Description: maximum load capacity 3000 kg  ,Power Ac / DCApprox. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 15 kg

System DELMAG ; Load capacity 0.5 t ; Tare weight 1.45 t ; Tray capacity 2 m³ ; Reach C= 2029 , D= 3220 mm

Description: Rotating Telescopic Handler serial number ZF1RT40A9C5000532 engine detailsIveco 6 cyl. turbo 145 hp max lifting capacity 4500 kg Capacity at maximum lifting height 2500 Kg max lifting height 21 mt hydraulic system max delivery120 lt/min hydraulic system pressure 230 bar fuel tank capacity 155 lt max travel speed 40 km/h traction 4x4 transmission hydrostatic number of gears 2 tires size 18-22.5 tires condition 90% IMPORTANT:  , For the loading it's needed a suitable transport vehicle , (equipped with ramp) and the equipment can be driven on it. Dimensions and weight are approximate, , Operating hours ,might by slightly different For more detailed information, please see PDF file (roto-series-en.pdf)Approx. Onsite Dimension. (l x w x h): 8,800 x 2,400 x 2,900 mm, weight approx.: 15,500 kg

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

Description: Primary voltage 380 V, data according to type plate ,Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 900 mm, weight approx.: 380 kg

ID3197 Wolf TSP 124 year/Year of construction 2020 1850 kg Bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 m², throughput/hour: 52-77 cbm/hour, working pressure: 280-300 bar, oil requirement: 150-200 l, max. pressure: 320 bar, with Lehnhoff MS21 quick coupler bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 sqm, throughput/hour: 52-77 cbm/h, working pressure: 280-300 bar, oil requirement: 150-200 l, pressure max.: 320 bar, with quick coupler Lehnhoff MS21

Description: 3000 rpm, voltage 42 V, petrol engine, without further accessoriesApprox. Onsite Dimension. (l x w x h): 1,400 x 600 x 900 mm, weight approx.: 250 kg

ID3129 MRS 5,5 cbm grapple 5.5 cbm MRS hydraulic grab 5.5 cbm MRS Hydraulic Grapple

Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 400 mm, weight approx.: 150 kg

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Description: defective 2.5 m length Approx. Onsite Dimension. (l x w x h): 2,500 x 400 x 600 mm, weight approx.: 150 kg

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

Description: Raising and lowering does not work. Presumably a defect in the hydraulics, as the control works. Untested / defects cannot be excludedApprox. Onsite Dimension. (l x w x h): 1.200 x 1.200 x 2.500 mm, weight approx.: 1.000 kg

Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.

Description: Carrying capacity 500 kg eachApprox. Onsite Dimension. (l x w x h): 400 x 500 x 380 mm, weight approx.: 100 kg

Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock

Description: Professional electric chain hoist Maximum capacity 500 kg. Voltage 230 volts. Maximum lifting height 300 cm. Lifting speed 280 cm per minute. Chain diameter 6,3 mm.Approx. Onsite Dimension. (l x w x h): 500 x 350 x 600 mm, weight approx.: 20 kg

As pictured without cables. Shipping D-country without islands 9.-

Description: Load capacity 2000 kg including charger see picturesApprox. Onsite Dimension. (l x w x h): 400 x 280 x 450 mm, weight approx.: 700 kg

Rope grab bucket older design but little used good condition. Bucket extension 1 x 4 replaceable fence 1 x 3 replaceable fence little snuffed. Bucket width: approx. 700 mm Shovel opening: approx. 1.8 m Double pulleys at the bottom and top. Total height: approx. 2.8 m

Description: Load lifting magnet, load capacity 1000Kg, see pictures.Approx. Onsite Dimension. (l x w x h): 320 x 180 x 200 mm, weight approx.: 31 kg

Snow sign of the company Albert Uenningmann, suitable for cyclists Gehlmax KL 265. 2np70ra It is in very good condition as it was rarely in use. Dimensions: Shield: 150 cm x 60 cm Bracket: 80 cm x 45 cm (trapezoidal)

Description: Load lifting magnet, load capacity 300Kg, see pictures.Approx. Onsite Dimension. (l x w x h): 290 x 100 x 100 mm, weight approx.: 16 kg

Concrete silo, conical, 375 l

Description: The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mmApprox. Onsite Dimension. (l x w x h): 420 x 180 x 280 mm, weight approx.: 21 kg