Manufacturer:
(Category: 1107)
Seller: AMARON s.r.o.
Inv. Num. : 6597 Type: AS275 Producer: AOSIF ENGINEERING LTD Created: 2022 Parameters: Throughput speed: 1500 1/min Frequency: 50 Hz Voltage: 380 V Machine dimensions: 1578x778x1290 mm Weight: 2800 kg
There is a complete compressed air system available, including (1) Screw Compressor Compair L110 RS-13A, load: 110kW (2) Screw Compressor Compair L90-10A, load: 90kW (3) Screw Compressor Renner RSF 765, load: 75kW, year of construction: 2011, operational hours counter: 22,380h (4) 2x Compressed Air Tank Maschinen- und Behälterbau MB 140331, capacity: 5000l, year of construction: 2014 (5) 2x Refrigeration Dryer CompAir F0630HS-A400, weight: 580kg, year of construction: 2014, with additional equipment.
Seller: Andreas Fabig Maschinenhandel
Natural gas CHP MAN E2876 E312 Power el.: 143 kW Power th.: 205 kW 6 cylinders Commissioning: 2017 Hours: 44650 Full maintenance by AVS Aggregate has been preserved Generator: Manufacturer: FKI - Type: MJB250LB/4 - 158/188 kVA Soundproofing hood 2x heat exchanger and heat accumulator 2x 5000 liters Subject to prior sale - errors possible Internal Reference Number: E-1175
Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible.
Seller: UIDL Parts GmbH
Used exhaust gas heat exchanger Aprovis, functional; Price net EXW
An inspection is possible.
Seller: UIDL Parts GmbH
Dungs gas valve, used, 24 V, DN 50
Power: 60kVA, length: 2730mm, width: 1100mm, height: 1795mm, weight: 1.525t, operational hours counter: 5559h.
Seller: UIDL Parts GmbH
used, Dungs FRNG5150, EXW
P max.: 8.3bar / 120psi / 0.83MPa, QV: 13l/s / 27.5cfm / 0.78m³/min, P motor: 5.5kW / 7.5hp, n motor: 2940rpm, weight: 338kg. An on-site inspection is possible.
Seller: UIDL Parts GmbH
Complete control cabinet for Jenbacher 316; EXW
Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.
Seller: Pelmar Engineering Germany GmbH
Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar
Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h.
Seller: TILA GmbH
Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20
Nominal power: 11kW, length: 810mm, weight: ca. 220kg.
Seller: Reitz Technik GmbH
Large surface light LED: 70 watt lamp large surface Significant reduction in electricity costs and shortest payback period Housing stainless steel Easy to repair at failure of lamps (only bulb exchange, finished) to sensitive soldered light strip of conventional surfaces LED spotlights. No separate power supply. Input voltage 230V LED power consumption 70W comparison with conventional light sources: equivalent to 10 light bulbs 60 Watt Brightness in lumens 5800 LM Colour temperature 3200 K warm white 10 PCs LED bulbs 7 watts = 70 watts total power life > 30,000 hours dimensions 400 mm 300 mm 300 mm, weight approx. 7 kg light angle 120 ° With Wieland connector and Wieland junction box
Volume flow: 1.5m³/min, max. operational pressure: 10bar, connected load: 11kW.
EDDY CURRENT SEPARATOR BRAND : ERIEZ MODEL : REV X - E ST22-40'' TOTAL WIDTH : 1000 MM 1500KG / HR
Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h.
Seller: Andreas Fabig Maschinenhandel
2 pieces of energy CHP Engine: Liebherr G 926 Electrical power: approx. 120 kW Generator: Leroy Somer Operating hours: approx. 95000 Regularly serviced
Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.
Seller: Andreas Fabig Maschinenhandel
Power: 105 kW Mains voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Generator: Marelli MJB 250 MA4, 165 kVA Engine hours: Approx. 60000 Turbocharger is new, generator was renewed in 2019 As a replacement unit, the unit has a water damage: Liebherr DITOM TBG 926 Built: 1999 Subject to prior sale - Errors possible
Volume flow: 13.3m³/min, rotational speed: 1500/min, connected load: 90kW.
Seller: Andreas Fabig Maschinenhandel
Natural gas CHP units available Jenbacher JMS 312 GS-B02 Year of construction: 1994 Power electric: 470 kW Thermal power: 618 kW Generator: Stamford HC 634 H2, 910 kVA Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 1/min Operating hours: approx. 84000 Last overhaul at approx. 45000 operating hours Includes heat exchanger, control cabinets Subject to prior sale - errors possible Ref. No.: E-0913
Volume flow: 18.9m³/min, rotational speed: 3000/min, connected load: 132kW.
Seller: Andreas Fabig Maschinenhandel
Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165
Displacement: 244cm³, max. operational temperature: 100°C.
Used gas compressor Mehrer TRE 700 from a Malmberg pressurized water wash. Approx. 110,000 operating hours. Functionally expanded. With valves and pulley.
Volume flow: 186m³/h, temperature: -10 to 120°C.
