sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 836)
Nipping press - manual, Make Krause, Model FNP500, Year 1980´s, Width 500 x 250 I5542423 mm, Options up to 100 mm I5542423 thickness, Available Direct, Width: 500 x 250 mm, Options: up to 100 mm thickness
ATS 2000US, Arch size 50x26cm, band width: 30 mm, welding by ultrasoon / high frequency, for jumbo rolls, in perfect working order
Joint burning machine, Make Zechni, Model Cimatic, Year 1970?, Width 490 mm, Thickness up to 80 mm thickness, Details Adjustable temp, pneumatic, Available direct, Width: 490 mm, Thickness: up to 80 mm thickness
COM J240, Arch size 24 x 20 cm, band width: 30 mm, welding by heat, can take both small rolls and jumbo rolls, in perfect working order, few parts replaced
Creasing & Perforating machine, Kroll, Model 700, Year 1960´s, Working width 700 mm, Tools some tools, but not worth mentioning, Available direct, Working width: 700 mm, Tools: some tools, but not worth mentioning
ATS MS420-S, Arch size 42x20 cm, band width: 30 mm, welding by heat, in perfect working order
Four head paper driller, Nagel, Model Citoborma 480 AB, Year 1988, Details 4 head paper driller with adjustable heads, I5542423 with tabulator, Operation Electric, Available Direct, Operation: Electric
Foil stamping - embossing, Make PB&E, Model Comet, Year 1980, Size of the plate 150 x 200 mm, Foil transport Automatic by pneumatic arm, Condition machine can be purchased refurbished or as-is, Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement, Available Direct, Size of the plate: 150 x 200 mm, Foil transport: Automatic by pneumatic arm
Nipping press - pneumatic, Make Probook Engineering, Model Nipper, Year 2005, Working width 350 mm, Available direct, Working width: 350 mm
Wire-O punching & binding machine, Make Rilecart, Model FP340, Year 2000, Workingwidth 340 mm, Tools 1 x 3:1 with square holes for books, Closing all standard thicknesses by manual lever, Details with precise side lay, electric foot switch, Available Direct, Workingwidth: 340 mm, Tools: 1 x 3:1 with square holes for books, Closing: all standard thicknesses by manual lever
Foil stamping - embossing - semi automatic, Make PB&E, Model Meteor, Year 1980, Size of the plate 420 x 510 mm, Foil transport both longitudinally and transversely, Condition machine is currently being refurbished, Details automatic foil transport (adjustable foil pull) adjustable dwelling time, adjustable embossing time, Size of the heating plate: 305 x 470 mm, Size of the mounting plate: 300 x 400 mm (a bigger plate is possible), Size of the shuttle table: 420 x 510 mm, Foil transport: both longitudinally and transversely, Pressure: up to about 10 tons
Nipping press - manual, Make Robust, Model FNP500, Year 1980´s, Width 500 x 250 mm, Options up to 100 mm thickness, Available Direct, Width: 500 x 250 mm, Options: up to 100 mm thickness
Casing-in machine, Make Schmedt, Model Präleg HHS1801, Year 1998, Minimum size 80 x 110 x 2 mm, Maximum Size 340 x 320 x 80, Speed up to 200 cycles per hour, Available direct, Minimum size: 80 x 110 x 2 mm, Maximum size: 340 x 320 x 80, Speed: up to 200 cycles per hour
Casing-in machine, Make Schmedt, Model Präleg XL HHS1815, Year 1999, Minimum size 80 x 110 x 2 mm, Maximum Size 450 x 440 x 80, Speed up to 200 cycles per hour, Details optionally we can supply the machine with a waffled glue roller, Available direct, after order machine will be completed with a cover,, 2 leak trays, etc., Minimum size: 80 x 110 x 2 mm, Maximum size: 450 x 440 x 80, Speed: up to 200 cycles per hour
Case rounding machine, Size: 600 mm working width and spine width up to 100 mm
Case rounding machine, Make Schmedt, Model Prärund HHS17-45, Year 1997, Size 450 mm working width and spine width up to 100 mm, Available direct, Size: 450 mm working width and spine width up to 100 mm
Case rounding machine, Make Schmedt, Model Prärund HHS17-45, Year 1997, Size 450 mm working width and spine width up to 100 mm, Available direct, Size: 450 mm working width and spine width up to 100 mm
Creasing/scoring/cutting machine, Working width: 800mm, Feeder: can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger
Nipper - Double action hydraulic nipping press, Make Splek (Sperr & Lechner), Model Nipper, Nipping width 420 mm, Thickness up to 90 mm adjustable, Pressure up to 3.200 kg, Details on request we can retrofit the machine with the activation arm, Available direct, Nipping width: 420 mm, Thickness: up to 90mm adjustable, Pressure: up to 3.200 kg
Full surface gluingmachine, Width 800 mm, Glues cold PVA glue, Details machine modified to topgluing machine, Width: 800 mm, Glues: cold PVA glue
Perforating machine, espcially great for embroidery card punching, Make Walter Kroll, Model 900, Year 1960´s, Working width 900 mm, Tools 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes, Details this Hydraulic driven machine does have a mechanical computer that has so called tabs that can be put on/off and adjusted. this determines the pulling distance, also they are exchangable for another program that you can make yourself from a threaded rod., Available direct, Working width: 900 mm, Tools: 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes
Roller press, Make Swift, Model roller press 61, Year 1980´s ?, Width 610 mm, Available Direct, Width: 610 mm
Roller press, Make Swift, Model Roller press 76, Year 1980´s ?, Width 760 mm, Available Direct, Width: 760 mm
Joint Burning machine, Wolk, JB 360, Size 360 mm, Available Direct, Size: 360 mm
Casing-in machine, Zechini, Model Gamma, Year 2000, Working width 420 mm, Thickness 100 mm (electrical adjustable), Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears, Available Direct, Workingwidth: 420 mm, Thickness: 100 mm (electrical adjustable)
Case rounding machine, Unknown, Model 600, Year 2000´s, Working size 600 mm, Available Direct, Working size: 600 mm
Banding machine thermal, Make COM, Model J240, Year 2000, Workingwidth 300 mm, Working height 240 mm, Band width 30 mm, Rolls suitable for inside standard rolls with core 50 mm and Jumbo rolls with core 75 mm., Details Adjustable in height, operated by push button, optical sensor, and optional by foot switch, for paper band and plastic band, Available direct, Workingwidth: 300 mm, Working height: 240 mm, Band width: 30 mm, Rolls: suitable for inside standard rolls with core 50 mm and Jumbo rolls with core 75 mm.
