Perceuses de passage

Centre d’usinage en flux continu Largeur utile 1300 mm Dimensions de travail X : 4200 mm / Y : 1300 mm / Z : 60 mm Perceuse verticale HSD 10 - 3x2 horizontale - 1lame de scie) Vitesses de travail X : 100 m/min / Y : 100 m/min - Z : 20 m/min 5.5 Kw I 7.50 HP ISO 30 HSD Moteur de broche Manutention des panneaux avec système de double serrage (servocommande indépendante) Table de travail de flottation d’air double face Programme CAO/FAO AES WOP Système de vérification des pièces avec laser Poids (environ) 3.500 kg

Centre d’usinage avec groupe de perçage sans unité de fraisage Dimensions de travail X :Unlimited / Y : 950mm / Z : 70 mm Perceuse verticale HSD 10 - 3x2 horizontale - 1 lame de scie) Vitesses de travail X : 70 m/min / Y : 70 m/min - Z : 20 m/min Manutention de panneaux avec système de serrage unique Table de travail de flottation d’air double face Programme CAO/FAO AES WOP Système de vérification des pièces avec laser Poids (environ) 1.450 kg

CNC continu avec unité de perçage et électrobroche pour les travaux de fraisage Dimensions de travail X :Unlimited / Y : 950mm / Z : 70 mm Perceuse verticale HSD 10 - 3x2 horizontale - 1 lame de scie) Vitesses de travail X : 70 m/min / Y : 70 m/min - Z : 20 m/min 5,5 Kw I 7.50 HP ER32 Manuel HSD Moteur de broche Table de travail de flottation d’air double face Système de vérification des pièces avec laser Poids (environ) 1.500 kg

Description: serial number: 59639 Technical specifications: working width: min 205 mm max: 3200 mm working depth: min 100 mm max 1200 mm passage height: min 8 mm max: 60 mm control and program system two section conveyor, with inverter and automatic adjustment by NC regulation of the measurements of the backstops in automatic by NC number. 4 Double manual pression units number. 6 Panel supports number. 2 Horizontal heads, each with number. 1 motor 2.3 HP and 20-spindles chuck unit number. 6 Vertical bottom heads 96 mm width pneumatically operated, number. 2 motors 1.8 hp and number. 2 boring chucks quick positioning of the heads along the beam ('X' axis) by means of rack and pinion and crank for fine adjustment with encoder for position indication quick positioning of each chucks crosswise direction ('Y' axis) by means of a ball screw and crank for fine adjustment with encoder ...

Engin de forage continu Biesse Techno Logic Masch. N° 873/90 Position 1 : Chargeur BIESSE-TECHNO LOGIC Point 2 : Transfert BIESSE-TECHNO LOGIC Point 3 : Transfert BIESSE-TECHNO LOGIC Article 5: Perceuse continue BIESSE-TECHNO LOGIC Point 6 : Appareil de forage continu horizontal BIESSE-TECHNO LOGIC Point 7 : Transfert BIESSE-TECHNO LOGIC Point 8 : Transfert BIESSE-TECHNO LOGIC Position 9 : Brosseuse BIESSE-TECHNO LOGIC Article 10: Déchargeur BIESSE-TECHNO LOGIC Poids env. 4 à L x L x H : 6,0 x 2,4 x 2,5 m Année de construction 1990 Démantèlement par l’acheteur L’usine est en bon état, prête à fonctionner Sous réserve de modifications, d’erreurs, de ventes préalables ! Service/pièces de rechange par MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Génie mécanique Eisenbahnstrasse 25 CH-4900 Langenthal/Suisse  ...

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double row ...

Description: Max panel size 3050x800x50 mm Min panel size 300x90x10 mm Maximum speed of X-Y axes m/min 25 Vertical spindles n.7 (4X+3Y) Horizontal spindles along Y/X axis n.2 (1+1) 1 Blade, diameter/thickness mm 100/5 Motor power kW (hp) 1.5 (2) Spindle/blade rotation speed rpm 3350/4300 Installed power kVA 4.5Approx. Onsite Dimension. (l x w x h): 1,950 x 1,650 x 1,150 mm, weight approx.: 2,500 kg

Description: TECHNICAL FEATURES: Useful working dimensions X: , ,min 250 – max 3,000 mm Useful working dimensions Y: min 100 – max 920 mm Piece passage: min 12 – max 60 mm COMPOSED BY: 6 top vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 6 lower vertical drilling units with numerical control positioning, each complete with 2 chucks with 26 independent vertical spindles 2 numerically controlled horizontal drilling units each complete with 2 chucks with 21 independent spindles 6 electronically positioned pressure units Fixed side panels and photocell barriers serial number: ALL/076/03, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 20,000 kg

Description: serial number: 590524 power supply 380 V, 3PH/ 50Hzserial number: 590,524, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,400 x 1,500 mm, weight approx.: 1,500 kg

Description: X axis work area 2500 mm Y axis work area 1000 mm Max panel passage 80 mm No. collets 2 Automatic panel stacking system , With Motorised transfer BORING UNITS 1 Unit : top Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 BORING UNITS 2 Unit : bottom Vertical Boring Spindles : 32 Horizontal Boring Spindles in X : 8 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 42 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM ROUTER SPINDLES 2 Unit : bottom No. controlled axes : 3 Motor power : 6 kw r.p.m. : 7500 RPM GROOVING UNIT 1 Unit : top Unit : with 0 / 90 degree positioning Max. tool diameter : 125 mm r.p.m. : 7500 RPM GROOVING UNIT 2 Unit : bottom Unit : with 0 / 90 degree positioning Max. tool di ...