subcategories machines for plastic

cat.-No. 2nd category level results
303 blow moulding machines 130
302 extruders 472
301 injection moulding machines 1,702
309 mills 188
306 moulds 29
308 other machines for plastic 529
305 peripheral equipment (e.g. heating,cooling,drying) 522
307 rubber machines 310
310 spare parts for plastic machinery 262
304 thermoforming machines 115
300 all machines for plastic order by entry date descending 4,713

Banner ad information  

latest results machines for plastic

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674122
approved
dealer
New in: 1999

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 130000 kN, 194 g/PS, 45 mm

used Arburg Allrounder 420C 1300-350. Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674121
approved
dealer
ankerimg
New in: 2001

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 50000 kN, 78 g/PS, 30 mm

used Demag Ergotech 50/320-120. Clamping force: 50 t Year of construction: 2001 Injection weight in PS: 78 g Injection unit: .../120 Screw diameter: 30 mm Spec. Spray pressure: 1350 bar Spray volume: 88.3 cc Injection weight in PS: 78 g Hydr. Drive power: 11 kW Cylinder heating capacity: 8.3 kW L/D screw ratio: 20 Clamping unit: 50/... Clamping force:: 50 t Lights spar spacing: 320 x 320 mm Aperture travel: 400 mm Max. plate spacing: 610 mm General information: Delivery Time: Dostępna Total connected load: 19.3 kW Fuel tank capacity OIL: 180 l Weight: 3250 kg Equipment: 1 x Pneumatic Valve 1 x Hydraulic Core

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674118
approved
dealer
New in: 2006

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

used Demag Ergotech Concept 35/280 - 80. Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674117
approved
dealer
New in: 1998

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 400000 kN, 556 g/PS, 55 mm

used Engel ES 1350/ 400 HL. Clamping force: 400 t Year of construction: 1998 Injection weight in PS: 556 g Injection unit: .../1350 Screw diameter: 55 mm Spec. Spray pressure: 2183 bar Spray volume: 618 ccm Injection weight in PS: 556 g Hydr. Drive power: 45 kW Cylinder heating capacity: 19.8 kW Clamping force:: 400 t Lights spar spacing: brak column mm Max. plate spacing: 1300 mm Ejector travel: 250 mm General information: Weight: 26150 kg Equipment: Robot Restricted access area Conveyor belt

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674115
approved
dealer
ankerimg
New in: 1999

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 250000 kN, 841 g/PS, 70 mm

used Krauss Maffei KM 250-1400 C1. Clamping force: 250 t Year of construction: 1999 Injection weight in PS: 841 g Control Type: MC4 Injection unit: .../1400 Screw diameter: 70 mm Spec. Injection pressure: 1469 bar Spraying volume: 924 ccm Injection weight in PS: 841 g Hydr. Drive power: 45 kW Cylinder heating capacity: 18 kW Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 995 x 1050 mm Lights spar spacing: 630 x 630 mm Aperture travel: 820 mm Max. plate spacing: 1150 mm Ejector travel: 200 mm General information: Weight: 12500 kg Equipment: New Snail New Snail Tip New hydraulic motor New hydraulic lines In addition, the machine is retrofitted with pneumatic blow-off valves and needles Additionally retrofitted with 2 hydraulic needles. Robot

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674114
approved
dealer
New in: 2013

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 180000 kN, 447 g/PS, 50 mm

used Battenfeld HM 180/1000. Clamping force: 180 t Year of construction: 2013 Injection weight in PS: 447 g Control Type: Unilog B6P Injection unit: .../1000 Screw diameter: 50 mm Spec. Injection pressure: 2016 bar Spraying volume: 491 ccm Injection weight in PS: 447 g L/D screw ratio: 22 Clamping unit: 180/... Clamping force:: 180 t Lights spar spacing: 570 x 520 mm Ejector force: 41.2 kN Tool installation height: 325 mm Aperture travel: 850 mm Max. plate spacing: 1175 mm Ejector travel: 200 mm General information: Fuel tank capacity OIL: 400 l Weight: 8000 kg Dimensions(m) LxWxH: 5.2 x 1.6 x 2.2 m

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674113
approved
dealer
New in: 2000

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 60000 kN, 18 g/PS, 15 mm

used Arburg Allrounder 370S 600-150. Clamping force: 60 t Year of construction: 2000 Injection weight in PS: 18 g Control type: Selogica Injection unit: .../150 Screw diameter: 15 mm Spec. Injection pressure: 2500 bar Spraying volume: 20 ccm Injection weight in PS: 18 g Clamping unit: 600/... Clamping force:: 60 t Size of clamping plates: 570 x 570 mm Lights spar spacing: 370 x 370 mm Tool installation height: 200 mm Aperture travel: 450 mm Max. plate spacing: 650 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 150 l Weight: 3600 kg Dimensions(m) LxWxH: 4.0 x 1.2 x 2.1 m

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674112
approved
dealer
New in: 2001

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 100000 kN, 149 g/PS, 35 mm

used Demag Ergotech 100/420-310 concept. Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674111
approved
dealer
New in: 2008

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 250000 kN, 690 g/PS, 60 mm

used Demag ergotech 250/630-1450 system. Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674100
approved
dealer
New in: 2018

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 400000 kN, 980 g/PS, 65 mm

used Battenfeld MacroPower 400/2250. Clamping force: 400 t Year of construction: 2018 Injection weight in PS: 980 g Control type: UNILOG B8 Injection unit: .../2250 Screw diameter: 65 mm Spec. Injection pressure: 2070 bar Spray volume: 1078 ccm Injection weight in PS: 980 g L/D screw ratio: 22 Clamping unit: 400/... Clamping force:: 400 t Tool installation height: 400...850 mm Aperture travel: 1050 mm Max. plate spacing: 1900 mm Equipment: Servomotor Restricted access area Conveyor belt Robot W832 / Z: 2500 Y: 1600 X:500 2 x pneumatic valve on the fixed plate 2 x pneumatic valve on the movable plate 2 x hydraulic core on the fixed plate 2 x hydraulic core on the movable plate Hour meter: 14,200 working hours

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674098
approved
dealer
ankerimg
New in: 2005

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 1000 kN, 6947 g/PS, 120 mm

used Battenfeld HM 10000 2P/19000. Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674097
approved
dealer
New in: 2001

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 200000 kN, 117 g/PS, 35 mm

used Arburg Allrounder 570C 2000-350/350. Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674095
approved
dealer
New in: 2006

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 200000 kN, 72 g/PS, 30 mm

used Arburg 570C 2000 – 150 / 150. Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163674093
approved
dealer
New in: 2006

used

checkTOP Seller: Europnet IMM
Location: Land-de
add to watchlist

Key data: 160 kN, 291 g/PS, 45 mm

used Arburg Allrounder 520C 16. Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls

308 other machines for plastic
Entry date: 28.03.2024 item-No.: 163674092
approved
dealer
New in: 2022

used

check Seller: STOLPEX Machinery for Windows
Location: 36002 Jasionka Land-pl
add to watchlist

used GEVO SE 1-SA Screwing unit. Year: 2022 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control - machine base - pneumatic profile mounting

301 injection moulding machines / Injection molding machines
Entry date: 28.03.2024 item-No.: 163673296
approved
dealer
ankerimg
New in: 2009

used

check Seller: TMS CO.,LTD
Location: 440-2 Suwon Land-kr
add to watchlist

used ENGEL VC650H200W200COMBI. ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush

301 injection moulding machines / Plastic injection machines
Entry date: 27.03.2024 item-No.: 163666359
New in: 2005

used

Seller:
Location: 1097 Budapest Land-hu
Price: 17.500 € add to watchlist

Key data: 1600 kN, 359 g/PS, 50 mm

used Arburg 470C 1600-800. Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.

301 injection moulding machines / PET Machines
Entry date: 26.03.2024 item-No.: 163657387
New in: 2000

used

Seller: Optimisense LLC
Location: 1016 Hialeah - Miami Land-us
Price: 7.500 USD add to watchlist

used Husky HMI Xycom Automation 9960. USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

307 rubber machines / Rolling mills
Entry date: 26.03.2024 item-No.: 163656456

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: Land-de
add to watchlist

Key data: 600 mm, 1800 mm

used Berger 1800 x 600 mm. Speed: Infinitely variable via new frequency converter Fixed roller: 1 - 14.9 rpm = 2 - 28 m/min Adjustment roller: 1 - 17.5 rpm = 2 - 33 m/min Gap adjustment with manual actuation via worm gear, conversion to electromotive gap adjustment can be offered

307 rubber machines / Rubber extruders
Entry date: 26.03.2024 item-No.: 163656449
New in: 1992

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de
add to watchlist

Key data: 90 mm, 12

used Berstorff 90 x 12 D. Extruding height 1010 mm, Mailefer screw,

307 rubber machines / Rolling mills
Entry date: 26.03.2024 item-No.: 163656445

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de
add to watchlist

Key data: 250 mm, 500 mm

used Comerio Ercole 500 x Ø 250 mm. Gap adjustment manual with handwheel

307 rubber machines / Rubber extruders
Entry date: 26.03.2024 item-No.: 163656443
ankerimg
New in: 1987

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de
add to watchlist

Key data: 120 mm, 18 , 45 1/min

used Troester GS 120 k - 18 D Vac. Screw with vacuum zone, output approx. 255 - 400 kg/h, straight head

307 rubber machines / Interior blenders
Entry date: 26.03.2024 item-No.: 163656440
New in: 1988

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: 36419 Geisa Land-de
add to watchlist

used Francis Shaw K1 Mark 4 Intermix. The machine is designed for steam heating up to 10 bar (140°C) or water cooling and has a capacity of about 3.45 kG with a specific gravity of 1.0, i.e. working volume about 3.45 l. Flow drive of 60 hp, suitable for impeller speeds of 88 to 8 rpm, mixing chamber is steel housing, inner surfaces chrome-plated

305 peripheral equipment (e.g. heating,cooling,drying) / Refrigerating machines
Entry date: 26.03.2024 item-No.: 163656430
approved
dealer
New in: 2020

used

check Seller:
Location: 41334 Nettetal Land-de
add to watchlist

used MTA TAEevo Tech 902 P3. Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No. ...

308 other machines for plastic
Entry date: 26.03.2024 item-No.: 163656428
New in: 1991

used

Seller: DEGUMA-SCHÜTZ GmbH
Location: Land-de
add to watchlist

used Kannegiesser MLFT 8,5 x 12,5/8 Mold carrier. Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 ...

301 injection moulding machines / Injection molding machines
Entry date: 25.03.2024 item-No.: 163650161
approved
dealer
New in: 2013

used

checkTOP Seller: B&A MACHINERY
Location: WF1 5 WAKEFIELD Land-uk
add to watchlist

used ARBURG 920 HIDRIVE 5000-2100. B&A REF: 9006 TON: 500 SHOT WEIGHT: 993 SCREW DIAMETER: 70MM STROKE VOLUME: 70CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 1280 X 1280MM DBTB:920 X 920 MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1850MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: EUROMAP HEATING CAPACITY: 37KW ROBOT INTERFACE: EUROMAP ACCUMULATED: 2

301 injection moulding machines / Injection molding machines
Entry date: 25.03.2024 item-No.: 163650157
approved
dealer
New in: 2019

used

checkTOP Seller: B&A MACHINERY
Location: WF1 5 WAKEFIELD Land-uk
add to watchlist

used KRAUSS MAFFEI PX FULL ELECTRIC 80-380. B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

301 injection moulding machines / Injection molding machines
Entry date: 25.03.2024 item-No.: 163650155
approved
dealer
New in: 2019

used

checkTOP Seller: B&A MACHINERY
Location: Land-uk
add to watchlist

used KRAUSS MAFFEI PX FULL ELECTRIC 160-750. B&A REF: 9024 TON: 160 SHOT WEIGHT: 343 SCREW DIAMETER: 50MM STROKE VOLUME: 3477CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR CIRCUIT: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

301 injection moulding machines / Injection molding machines
Entry date: 25.03.2024 item-No.: 163650150
approved
dealer
New in: 1998

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz
add to watchlist

used Engel ES 200/50 HL ST. Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

305 peripheral equipment (e.g. heating,cooling,drying) / Granulate conveying devices
Entry date: 25.03.2024 item-No.: 163650129
New in: 2010

used

Seller: Markus Paulus
Location: 35099 Burgwald Land-de
Price: 7.000 € add to watchlist

used Helios Oktomat ECO SOS. 2 x Oktomat SOS Bj2010 and 2009 fully functional. Also available for sale single at half price

301 injection moulding machines / Plastic injection machines
Entry date: 25.03.2024 item-No.: 163650128
approved
dealer
New in: 2003

used

check Seller: Maschinenhandel Kmet
Location: Land-de
add to watchlist

Key data: 3000 kN, 850 g/PS, 70 mm

used Engel ES 1350/300 HL. Engel ES 1350/300 HL Year of construction 2001 + 2003 Hours: 77623 h + 92737 h Clamping force: 300 tons. Screw diameter: 70 mm 4 core pulls incl. Wittmann removal robot

307 rubber machines / Rolling mills
Entry date: 25.03.2024 item-No.: 163650126

used

Seller: Stratus-PET GmbH
Location: Land-de
add to watchlist

Key data: 550 mm, 1200 mm

used KraussMaffei Berstorff 120. BERSTORFF GmbH Mixing mill for all types of rubber compounds Roll width 120 cm Roll diameter 55 cm Machine in very good condition !

301 injection moulding machines / PET Machines
Entry date: 25.03.2024 item-No.: 163650124

used

Seller: Stratus-PET GmbH
Location: Land-de
add to watchlist

used HUSKY XL 300 PET. PET PREFORM Injection Molding Machine Manufacturer: HUSKY Type: XL 300 P Year of construction: 1994 Hours read (h): 19,672 Serial Number: 10816-L-94010 Condition: refurbished 2017 (see PDF) Screw Ø: 100 mm Clamping force: 300 t Panel size: 1,060 mm x 1,030 mm Tie bar spacing (H x V): 720 mm x 720 mm max. daylight: 1,040 mm Injection Position: Horizontal Dimensions injection unit (WxDxH) approx. 500 x 180 x 210 cm Dimensions clamping unit (WxDxH) approx. 440 x 195 x 260 cm Dimensions control cabinet (WxDxH) approx. 305 x 70 x 255 cm Weight of the injection unit 16 t Weight clamping unit 20 t Equipment: - Robot removal system HUSKY S/E Robot B Granulate dryer and conveyor belt: Dry Air Dryer Manufacturer: PIOVAN Type: DS528, Year of manufacture: 2003 (refurbished 2017) Serial Number: ODS 864 Air flow: 1,600 m³/h Funnel T4000IX ...

301 injection moulding machines / PET Machines
Entry date: 25.03.2024 item-No.: 163650123

used

Seller: Stratus-PET GmbH
Location: Land-de
add to watchlist

used HUSKY GL 300 PET. PET Preform Injection Molding Machine Production Line with Complete Peripherals Manufacturer: HUSKY Type: GL 300 PET P85/95 E100 Year of construction: 2000 Condition: Very good - refurbished by the manufacturer Husky in 2020 / Encore 2.0 / ProAct Program Equipment / Peripheral: Picking robots: -Husky FSI200GL300 - Refurbished in 2018 Packing unit: Soft Drop System with Turning Plate for Mesh Boxes Granule drying conveyance consists of: - Piovan Easy 3 - Piovan DP 621 Dry Air Dryer with Molecular Sieve Towers - Year of construction: 2006 - Piovan TN 800 Hopper 800 dm3 - Year of manufacture: 2006 - Piovan F48/2 suction delivery unit / vacuum pump - Year of manufacture: 2010 Tool Dryer / Mould Dryer: - Piovan RPA1800 Year of manufacture: 2016 Tool Temperature Control Device: - Moldmasters M2M Year of manufacture: 2015

301 injection moulding machines / PET Machines
Entry date: 25.03.2024 item-No.: 163650116

used

Seller: Stratus-PET GmbH
Location: Land-de
add to watchlist

used HUSKY HUAYAN 48 cav. 21,7 g (PCO 1881). PET PREOFRM Injection Mold Hotrunner : PET Injection Mold Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set as well as cooling mould

309 mills / Shredder facilities
Entry date: 25.03.2024 item-No.: 163650101
approved
dealer
New in: 1999

used

check Seller: GESTION DE TERMOPLASTICOS
Location: 03294 La Hoya - Elche/Elx Land-es
add to watchlist

used UNTHA LR-1000. 1-shaft ripper with hydraulic pusher, brand: Untha, model: LR-1000, rotor size: 1000x300 mm, 2 motors: 22 Kw (30 hp) each total: 44 Kw (60 hp), hopper size: 1000x1000 mm, year: 1999. With electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

307 rubber machines / Rubber processing machines
Entry date: 24.03.2024 item-No.: 163643930

used

Seller: Stratus-PET GmbH
Location: Land-de
add to watchlist

used BANDAG MATTEUZZI COLLMANN. Tyre retreading plant Complete production plant retreading plant for cold-retreaded truck tyres Output: up to 200 pcs/day Equipment: Pos.1 Rail System "Helm 500" Frame/Supports Manufacturer TRM Rail length approx. 110m, rail height approx. 2m 76 hooks with rollers 3 processing stations incl. extraction connections Spray tunnel for rubber solution incl. extraction Year of construction: 2008 Pos. 2. Roughening machine Matteuzzi RAS 90 DC 4 defect (drive shaft defective) Manufacturer: Matteuzzi Type: RAS 90 DC4 Machine number: 522 Year of construction: 2004 Pos. 3. Roughener Matteuzzi RAS 98 E ULTRA (as good as new) / Training device from training center Manufacturer: Matteuzzi Type: RAS 98 E Ultra Machine number: 522 Year of construction: 2013 Pos. 4 Roughening machine Bandag EHRD 23 X Machine number: 1031 Ye ...

308 other machines for plastic / Embossing machines
Entry date: 24.03.2024 item-No.: 163643424
approved
dealer

used

check Seller: Reitz Technik GmbH
Location: Land-de
add to watchlist

used REITZ EHSP522. Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press

308 other machines for plastic / Embossing machines
Entry date: 23.03.2024 item-No.: 163637385
approved
dealer

used

check Seller: Reitz Technik GmbH
Location: Land-de
add to watchlist

used COLLIN 500 P. Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

308 other machines for plastic / Embossing machines
Entry date: 23.03.2024 item-No.: 163637380
approved
dealer

used

check Seller: Reitz Technik GmbH
Location: 63599 Biebergemünd Land-de
add to watchlist

used Oropress. Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

back