We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Fabricant:
(Catégorie: 1009)
utilisé
• Hydraulic crawler excavator • Serial number 7KS00835 • Steel track • Track width 600 mm • Maximum Speed 4.41 km/h • 21 m. long boom • CATERPILLAR 2176CATAAC diesel engine: displacement 10300 cc, power 216 KW • Working hours according to counter 2112216230x3000x3650 mm51700 kguncheckedloaded on truck
utilisé
• Hydraulic crawler excavator • Serial number CAT0390DLWAG00271 • Steel track • Track width 750 mm • Maximum Speed 4.60 km/h • 21 m. long boom • CATERPILLAR C18 ACERT diesel engine: displacement 18100 cc, power 412 KW • Working hours according to counter 16126 • It's included: original boom and an extra bucket13700x3510x3900 mm93500 kguncheckedloaded on truck
utilisé
HITACHI ZX280LCN Excavator (3314) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 18.467 hours PIN: HCMBFK00V0003011210290x3000x3170 mm27800 kguncheckedloaded on truck
utilisé
13 ton HITACHI ZX130 Excavator (3296) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.242 hours PIN: HCMBCB00V002011437610x2490x2890 mm12600 kguncheckedloaded on truck
utilisé
HITACHI ZX280LCN Excavator (3313) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 15.159 hours PIN: HCMBFK00C0003011110290x3000x3170 mm27800 kguncheckedloaded on truck
utilisé
16 ton HITACHI ZX160 Excavator (3292) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 20.384 hours PIN: HCMBCC00T000106138640x2490x2880 mm16000 kguncheckedloaded on truck
utilisé
VOLVO EC290BNLC Excavator (3145) Engine: VOLVO D7D Gross Power: 153kw (205HP) Boom: 6.43m Arm: 3.71m 21.000 hours PIN: EC290V131710480x2990x3030 mm28400 kguncheckedloaded on truck
utilisé
Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.
utilisé
A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.
utilisé
With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.
utilisé
Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.
utilisé
Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.
utilisé
Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.
utilisé
Max. working height: 25.91m, max. platform height: 25.91m, max. horizontal reach: 23.32m, ground reach: 2.64m, platform capacity on/unrestricted: 300kg/454kg, platform capacity: 2 persons, max. lateral force: 400N, max. inclination: 2.5°/4.5°, max. wind speed: 12.5m/s, gradeability: 45%, rated power: 74hp. Dimensions X/Y/Z: approx. 2.5m/12.4m/2.8m, weight: approx. 17000kg.
utilisé
Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).
utilisé
Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.
utilisé
A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.
utilisé
Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.
utilisé
Power: 257kW, displacement: 12700cm³, torque: 1400rpm, bucket capacity: 4.5m³, max. dumping height: 3115mm, backhoe capacity: 4.5m³, outside turning radius: 7205mm, engine type: DC 13, tires: 26.5 R25 (L3), fuel: diesel. Transport dimensions X/Y/Z: approx. 9350mm/3300mm/3600mm, machine weight: approx. 26000kg, operating hours: 6228h. Documentation available. On-site inspection is possible.
utilisé
Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.
utilisé
Engine type: ZX250LCN-3, power: 132kW, fuel: diesel, max. digging depth: 6960mm, cubic capacity: 5193cm³, backhoe capacity: 1.65m³, track width: 600mm, undercarriage: NLC, boom: monoblock. Transport dimensions X/Y/Z: approx. 10300mm/3050mm/3000mm, weight: approx. 25000kg, operating hours: 16645, documentation available. On-site inspection is possible.
utilisé
Engine type: CAT 322 BLN, power: 114kW, fuel: diesel, max. digging depth: 2500mm, cubic capacity: 7200cm³, backhoe capacity: 1.4m³, track width: 600mm, backhoe width: 1350mm, max. reach: 9435mm, speed at max. torque: 1800rpm, boom: monobloc. Transport dimensions X/Y/Z: approx. 10500mm/3000mm/3200mm, weight: approx. 25000kg, operating hours: 16883h. Documentation available. On-site inspection possible.
utilisé
A scissor lift from an unknown manufacturer is available. Lifting height: 8140mm, working height: 10000mm, machine dimensions X/Y/Z: approx. 2350mm/1200mm/2300mm, weight: approx. 2250kg. The battery of the machine must be deep-charged. Documentation available. On-site inspection is possible.
utilisé
A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.
utilisé
Payload: 20000kg, speed: 6km/h, loading area height: approx. 2560mm, total height: approx. 3330mm, tare weight: 3325kg. Includes a matching roof. The roof is connected at 4 points with 4 screws and can be removed as required. Documentation available. On-site inspection is possible.
utilisé
Welding machine, bitumat, roof membrane welder, welder, foil welder-Manufacturer: Leister, welding machine type Triac Drive with transport box-Voltage: 220V-Power: 100 to 3680 W max-Hot air blower: Leister type Triac Pid 1600 W-Dimensions box: 460/360/H170 mm-Weight: 10 kg
utilisé
Année de construction 2017, 7380 h, 85 kw, avec godet et lame de bulldozer, avec Oilquick OQ45 Powertilt, poids propre 11790 kg
utilisé
Volume du godet : 0,17 m³ Puissance : 29.1 kW
utilisé
Excavator, wheel excavator, mobile excavator, hydraulic excavator, construction machine -Handover: in current condition as viewed -Working process: without function, lighting system partially defective see photos -Manufacturer: Zeppelin, mobile excavator type ZM 15 -Arm length: 7300 mm -Engine: Deutz 70 kW -Operating hours: 8665 -Transport dimensions: 8350/2500/H3100 mm -Weight: approx. 15 t
utilisé
Très bonne pelle de manutention Sennebogen avec châssis à chenilles à vendre. Année de construction 2012 Seulement environ 160 heures d’autonomie du moteur (nouveau moteur installé en 10/2024 pour environ 57 000 €, facture disponible) Dernière révision et remplacement des pièces d’usure effectués en 02/2024 pour 11300€. (Facture disponible) Heures de fonctionnement totales env. 13 200h