machines de travail des métaux / fraiseuses / Fraiseuses à table ronde
Fabricant: DMG MORI
Modèle:DMU 50
Type de machine: Fraiseuses à table ronde
Numéro de l'article: 170270954
Quantité: 1
Date: 02.10.2026
Emplacement:
Allemagne
Prix:
Seller-item-No.:011241
| General | |
| Universal Milling Machine; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Technical Data | |
| Type of main drive | AC |
| Drive power (100% DC) | 16 kW |
| Drive power (40% DC) | 21 kW |
| Speed range | 20 - 15000 rpm |
| Spindle taper | HSK-A 63 |
| Clamping System | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | -42000/-42000/-42000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,85 x 2,35 x 2,75 m |
| Weight approx. | 7500 Kg |
| Direct measuring system | Direct path measuring system |
| Spindle speed 15,000 rpm | Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table | Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation |
| Tool magazine 60 pockets | Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot screen | Swarf conveyor, scraper type with cleaned slot screen |
| Internal coolant supply 40bar/600l | Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Chip flushing for working area | Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS) |
| Rotating clear-view window | Rotating clear-view window (only available with option cabin roof) |
| Tool measuring device Heidenhain TT160 | Tool measuring device Heidenhain TT160 Tool length and diameter measurement Tool break fix mounted at the machine column with Cleaning air-blast, Calibration Tool |
| Preparation 3D Quickset | Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe) |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| Signal lamp 4-colour | Signal lamp 4 colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
| Exhibition design DMU50 3rd generation | Exhibition design DMU 50 3rd chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan |
| Coolant unit for electrical cabinet | Cooling unit for electrical cabinet recommended for ambient temperatures above 35 °C up to a maximum of 50 °C |
| Application Tuning Cycle ATC | Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Special equipment | Automation interface (Profibus) via M65 Clamping pneumatics 6bar, 2 clamping circuits Customized actuation of clamping system Filtermist FX5002F mist extraction unit Solid Ducting for Filtermist FX5002F unit Support for installation of , mist extractors & |
| Special equipment | Preparation kit (electrical and mechanical parts) for filter mist unit FX5002F (DMG MORI UK Spares) Swarf Bin |
