Type de machines
(Quantité: > 9)
Type de machines
(Quantité: > 2)
Fabricant:
(Catégorie: 1402)
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Gruse, hydraulic scissor lift table trolley, scissor lift trolley, Hebefix type HF 2 C -Load capacity: 500 kg -Platform: 970 x 500 mm -Dimension when retracted: Height 360 mm -Extended dimension: Height 970 mm -Push bars: not included in the scope of delivery -Number: 2x scissor lift trucks available -Price: per piece -Transport dimensions: 1230/600/H360 mm -Weight: 100 kg/unit
Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: 30 liters -Hydraulic tank: with level and temperature indicator -Return filter: Hydac RF BN/HC 30 BB 10 A 1.0 -Motor mount: Ø 147 mm / bolt circle Ø 163 mm M10 -Individual components: see photos -Dimensions: 495/340/H375 mm -Weight: 13.8 kg
Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit-Hydraulic tank: Hydraulic tank for hydraulic unit-Hydraulic tank: with level and temperature indicator-Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6-Individual components: see photos-Dimensions: 490/400/H515 mm-Weight: 25 kg.
Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt stainless steel -Width: 600 mm -Length: 6.7 m -Transport dimensions: Ø 320 x 600 mm -Weight: 42.7 kg
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg
utilisé
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
V-belt pulley, pulley -V-belt pulley: 5-groove pulley SPC 200/5 with taper bushing -V-belt width: 22 mm -Receiver: Taper bushing manx 3535-65 Ø 65 x 90 mm (can be replaced) -Dimensions: Ø 210 x 135 mm -Weight: 18.1 kg
Pneumatic cylinder, air cylinder, pneumatic plunger, air plunger, standard cylinder, clamping cylinder -Manufacturer: Rexroth, double-acting pneumatic cylinder type 0 822 120 005 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 270/46/H46 mm -Weight: 0.8 kg/pc.
Caster, swivel caster, transport equipment caster, fixed caster, double caster -Manufacturer: Dörner & Helmer, 4 pieces swivel caster double caster with plate and brake -Type: 778310 -Wheel: Ø 50 x 19 mm rubber -Submission/Price: complete -Dimensions each: 110/60/H75 mm -Weight: 0.4 kg/pc.
Solenoid valve, flap valve, electromagnetic valve, solenoid valve Valve manufacturer: Herion, unused -Type: 2323124 -Pressure: 0-10 bar -Connection: 3/4 -Magnet manufacturer: Norgren, type 1310 -Voltage: 230 V 40 - 60 Hz -Quantity: 25 pieces available Price: per piece -Dimensions: 230/125/H100 mm -Weight: 3.2 kg/piece
À vendre est un treuil à remontée sur chenilles ROBEL original de type 46.50 avec une capacité de levage de 10 t. Treuil professionnel et robuste pour soulever et abaisser des charges lourdes, notamment pour les applications dans la construction de voies et de voies ferrées. Données techniques : Fabricant : ROBEL Bahnbaumaschinen GmbH Type : 46,50 Numéro de série : 46.50-00459 Réf. n° : 800 465 0001 Année de construction : 2019 Capacité de charge / SWL : 10 000 kg Hauteur maximale de levage : 300 mm Hauteur d’excavation : 80 mm Poids : environ 46 kg Manivelle de sécurité avec frein à pression de charge et poignée rabattable Conception robuste avec plaque de base renforcée Fabriqué en Allemagne Marquage CE Le treuil est en bon état d’utilisation avec des traces habituelles d’utilisation et de stockage. Adapté comme treu ...
Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.
Electric motor power: 1.5kW, supply voltage: 380V, connected load: 4.5kVA, drive: fully electric. An on-site inspection is possible.
A gantry crane in need of repair is offered. Load capacity: 5000kg (formerly 10000kg), Demag wire rope hoist installed, bearing worn out. An on-site inspection is possible.
Working width: approx. 3600mm, load capacity: 2500kg. An on-site inspection is possible.
Bowl diameter: 1200mm, variable loading height: 1800mm-2200mm, suitable for shaft lengths up to 400mm. Inspection by appointment is possible.
Ball valve, ball valve with internal thread -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2 inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg
Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: unicraft, Scissor lift table, flat form lift table type SHT1001G -Load capacity: 1000 kg -Platform: 1140 x 1460 mm -Dimension when retracted: Height 82 mm -Extended dimension: Height 760 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1140/1460/H210 mm -Weight: 341 kg
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg
Two large and two small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 2x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible.
Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, dust extraction blower, dust blower -Fan: centrifugal fan Ø 285 mm -Motor: ABB 0.55 kW -Speed: 2820 rpm -Fan wheel: Ø 285 x 20 mm -Inlet: Ø 110 mm -Air duct connection: Ø 75 mm -Dimensions: 400/350/H380 mm -Weight: 12.4 kg
Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: Length: approx. 6,000 mm Width: approx. 2,900 mm Height: approx. 780 mm Workpiece length: max. approx. 4,000 mm Workpiece width: max. approx. 900 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: elastic claw coupling -Hub bore: Ø 55/40 mm -Quantity: 1x coupling available -Dimensions: Ø 128 x 145 mm -Weight: 6.1 kg
Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Dimensions: see photos -Dimensions: 270/110/40 mm -Weight: 2.1 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: Coupling half with toothed ring -Hub bore: Ø 35 mm -Dimensions: Ø 79 x 52 mm -Weight: 0.9 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Maedler, elastic jaw coupling -Hub bore: Ø 18/19 mm -Quantity: 1x coupling available -Dimensions: Ø 50 x 60 mm -Weight: 0.2 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic jaw coupling -Type: GS24 CT9327 -Hub bore: Ø 20 mm -Quantity: 1x coupling available -Dimensions: Ø 55 x 77 mm -Weight: 0.4 kg
