other machines for plastic used for sale

Inv. Num. : 7416 Type: LXJ-2030 Producer: UNICH Created: 2014 Parameters: Laser power: 2x130 W Work table length: 3000 mm Work table width: 2000 mm Equipment: Radiator Compressor PC Software Exhaust fan The laser is designed for cutting plastics and wood.

Number of milling agregates: 2 St.milling stroke vertical: x mmProfile height max.: x mmweight of the machine ca.: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7465 Type:- Producer:- Generated: Parameters: The line consists of the following parts: Copper wire winder (double) Gumolis Insulation Line Injection 2x Bongard (Vein Spreader) Main street Gumolis Shell.line Compensator Line unwinder Coil Housing Line Auxiliary towing Compensator Cooling Enclosure Cooling water tank Outdoor refrigeration units Large pump water system Stolberger Filling Machine Wire rewinding workstation Round semi-automatic Welding foil package Mechanical Profile Projector HV test room Thermostat - Oven 5 x Temperature unit for extruder

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trommel: 6 m x 1.25 Ø. Sheet metal bore: 50 mm, geared motor: 0.55 kw (0.75 hp)

machine measurements: 6.850 x 3.600 x 1.900 mmmachine weight: 5.000 kgpower capacity: 9 kWCondition: used - as good as new unit is still completely packedSpecification: Medical surgical mask system completeConsisting of:- See sketches in the attachmentSummary of the equipment:This machine is mainly used for automatic forming of plane mask:the whole roll of cloth is driven by roller after being unrolled,and the cloth is folded and wrapped automatically.The nose bridge strip is rolled up for traction and unrolled.After cutting with a fixed length, it is imported into the edge cloth.The two sides are welded to the seal by ultrasonic welding.The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonicwelding.After the mask is made, it is transported to the flat belt linethrough the assemb ...

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

machine measurements: 9.657 x 1.472 x 1.985 mmmachine weight: -- kgpower capacity: -- kWCondition: used - as good as newSpecification: FFP 2 N95 mask system completeConsisting of:- see sketches in the plant- cycle time approx.: 35 - 50 pieces/min- not CE certified- Space requirement approx.: 9,657 x 1,472 x 1,985 mm- Completely assembledThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Film buffer silo: 10000 litres, geared motor: 2.2 KW (3 hp). With remover.

Year: 2001 serial number: 0940/01 operating pressure: 8 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winder: 1 coil, Brand: Aromaza, in stainless steel. With electrical panel and variator. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Compressed air preparation or atomization optimization, manufacturer: ENSUTEC, type: Airmatic AM 3000W-400-1.3, serial no.: 20170433, max. heating power: 2,500 W, max. permissible heating power: 2,500 W, max. Operating pressure: 8 bar, compressed air heating control: 0..85C, air volume at operating pressure: 2,800 NL/min., max. air volume flow: 3,000 NL/min., with 4 control cabinets, 4 pressure accumulators a. 4-piece, main control cabinet, suitable for 8 spray guns, round and flat jet

Plastic agglomerator, engine: 75 KW (100 hp), tank size: 1 m high, 1 m diam. Electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

New stainless steel centrifuge, model: CP-R2000, shaft length: 1200 mm, shaft diameter: 500 mm, motor: 37 Kw (50 hp) at 3000 rpm. No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Fast mixer : 200 Liters, brand: Samstang, engine: 2 speeds 14/19 hp. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Regenerative afterburner, manufacturer: KRANTZ, type: Ecoline 2 23,500 Nm³/h, year of manufacture: 2005, serial no.: G-8321161-2, with pre-filter or cartridges for RNV, roof passages must be professionally closed by the purchaser!

Circular vibrating screen, brand: Roto Sieve, diameter: 1,120 mm, power: 3 KW (4 hp), in stainless steel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Painting line, alternatively as a complete package from items 2190-2193! Without item 2940!

Conveyor belt Length: 6 m Width: 0.58 m. Legs with wheels. Reference: GT-4618 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Compressed air supply: 6.5bar, connected load: 2.3kW, weight: 180kg.

Hydraulic shear (guillotine) Brand: Gester, Model TN-30, cutting chamber: 770x650 mm, motor: 4 KW (5.5 hp).

Compressed air supply: 6bar, connected load: 1kW, weight: 120kg, the machine has defective pneumatics.

Conveyor belt Length: 5 m, width: 0.55 m. In stainless steel, height adjustable with sprinkler installation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used.

Agglomerator Brand: Prat, engine: 150 hp, tank: 1000 L.

Roller diameter: 550mm, roller width: 1500mm, connected load: 75kW, without documentation, accessories or spare parts, an inspection is possible, the machine was used to process silicones with colors, fillers and other additives.

New drying centrifuge : 1.25 x 0.5 m Ø, with grill: 3 mm and motor : 50 hp at 3,000 rpm. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible.