saws used for sale

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 18 - 100 m/mintable height: 880 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,84 tdimensions of the machine ca.: 1,85 x 1,9 x 2,0 mDemonstration system for a SPECIAL PRICEFully automatic miter band saw• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start recognition)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameter ...

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

cutting diameter: 220 mmsaw band length: 2450 x 27 x 0,9 mmtable height: 915 mmband speed: 35 + 70 m/minconnected load frequency: 400 Vcapacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210 x 210 mmcapacity 90 degrees: flat: 230 x 185 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 870 x 1550 x 1740 mmThe Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° -60 ° left. After the cut, the machine stays through oneSafety limit switches stand. The reduction is infinitely variableHydraulic system adjustable. The saw arm can be raised after the cutany position. The saw arm remains at the desired positionstand.The Z241 / R has the following features:Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400VConnector -16A-The machine is completely assembled and delivered ready for use.The data for this ad w ...

Inv. Num. : 5876 Type: ARG 640 DC SAF Producer: PILOUS Created: 2016 Parameters: Minimum belt feed speed: 20 m/min Maximum belt feed speed: 90 m/min Cutting area: 640 mm Saw blade size: 5770x41x1.3 mm Total power requirement: 8.8 kW Length: 3800 mm Width: 2050 mm Height: 2500 mm Weight: 4200 kg Equipment: 2x roller conveyor G1000 (length 3000 mm)

: 550 mm: 550 mm: 550 x 550 mmsaw band length: 5980 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,8 tdimensions: 3,0 x 2,15 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg

cutting diameter: 227 mmsaw band length: 2455 mmtable height: 840 mmcutting width: 260 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2455 x 27 x 0,9 mmcapacity 90 degrees: round: 227 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 260 x 220 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 45 degrees: flat: 200 x 220 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,25 tDimensions (LxWxH): 0,8 x 1,4 x 1,5 0Miter band saw- automatic cut- Base frame- Coolant pump- Chip brush for cleaning the saw band- Vise with quick adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

cutting diameter: 170 mmband length: 350 mmcapacity 90 degrees: square: 160 mmcapacity 90 degrees: flat: 170 x 220 mmtotal power requirement: 0,85 kWweight of the machine ca.: 180 Kgdimensions: 1,2 x 0,8 x 1,0 mHydraulic hacksaw with:- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 500 x 310 band speed: 15 - 100 m/mintable height: 844 mmdimensions of saw-band: 4250 x 34 x 1,1 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 2,4 x 1,935 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

cutting diameter: 220 mmband length: 420 mmcapacity 90 degrees: square: 210 mmcapacity 90 degrees: flat: 220 x 350 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,65 Kgdimensions: 1,2 x 0,8 x 1,1 mHydraulic hacksaw with:- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 13 - 73 U/mintotal power requirement: 3,0 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mHigh-performance vertical circle saw, fully automatic hydropneumatic.· Miter left. 60° + right. 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chip clearing brush in the saw ...

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mLeasing returns, little work done.Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height finder - Cutting monitoring by ammeter - Cutting pressure feed regulator - Miter cuts up to 60° left and 45° right - Quick-action clamping stick can be moved - Quick release lever - Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

saw blade diameter: 275 mmcapacity 90 degrees: round: 90 mmcapacity 90 degrees: square: 80 mmcapacity 90 degrees: flat: 100x70 mmcapacity 45 degrees: round: 75 mmcapacity 45 degrees: square: 70 mmcapacity 60 degrees: flat: 80x60 mmtotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,5 x0,85 x0,95 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

cutting diameter: 400 mmband length: 640 mmstroke: mmcapacity 45 degrees: round: mmcapacity 45 degrees: flat: mmcapacity 90 degrees: square: mmtotal power requirement: 3,2 / 4,0 kWweight of the machine ca.: 0,65 tdimensions: 1,7 x 0,65 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. W ...

WE OFFER AN VERY NICE DOALL HEAVY SAW - NC FULLY AUTOMATIC WITH COMPLETE CONWENYOR RAILS AND SPARES BLADES ON STOCK 13X NEW BLADES INCLUDED CUTTING CAPACITY: 100 -700mm 100W x 100H - 800W x 700H mm BLADE SIZE: 8250 x 67 X 1,6 mm SPEED: 16-85mm TENSION: BY HYDRAULIC COOLANT: 230L FEEDING LENNGHT : 400mm SINGLE TIME OR MULTIPLE TIMES DIMENSIONS OF MACHINE: 3910 W x 2330H x 2350L WEIGHT: 7000 KG FOR OUR CUSTOMERS WE ORGANIZE TRANSPORT WORLD WIDE MAKING EXPORT DOCUMENTS

capacity 90 degrees: round: 230 mmcapacity 90 degrees: square: 230 mm: 280 x 150 band speed: 35/70 m/minsaw band length: 2770 x 27 x 0,9 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 kgDimensions (LxWxH): 1,5 x 1,2 x 1,3 0Band saw including micro spray deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

cutting diameter: 230 mmband length: 375 mmcapacity 90 degrees: round: 230 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,28 tdimensions: 1,2 x 1,25 x 1,0 mAutomatic hacksaw- Coolant system- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.