grinding machines used for sale

Key data: 2000 mm, 375 mm

Manufacturer: Göckel Type: G65PL Stock number: 1016 Magnetic table clamping surface: 2000 x 375 mm Grinding spindle speed: 420 - 2900 rpm Grinding speed: 13 - 27.5 m/s Grinding wheel diameter: 150 - 730 mm Control: Siemens Power: 36 kW

Machine as good as new. -Pre-honing -Measure -Re-honing -Measure Fixtures for control housings available. Of course, other parts can also be honed.

Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.

Including cyclone filter

Inv. Num. : 7292 Type: FS30 Producer: LINDNER Created: GO 1999 Parameters: Machine weight: 3900 kg The grinder is in good condition.

Equipped with diamond discs

Inv. Num. : 7293 Type: FS30 Producer: LINDNER Generated: Parameters: The grinder is in good condition.

Machine was at well-known manufacturers of pistols, ran until the end. Sale without warranty Honing diameter 6-60mm Bore length: 150 mm Table height above floor: 910 mm Spindle end table: 750 mm Spindle center stand: 220 mm Spindle spacing: 220 mm Spindle drive Speed range: 168 - 1000 rpm Speed Adjustment: Infinitely Variable Drive power: 3 x 1.5 kW Hydraulically controlled working stroke Stroke adjustment: infinitely variable via shift cam Lifting speed: 0 - 20 m/min., infinitely variable Adjustable lifting speed Timber expansion by means of a separate hydraulic system Infinitely adjustable: 0-25 kp/cm² Hydraulic drive power: 7.5 kW Loading only possible upright, observe height 2600 mm!

Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank

This lot has a suggested retail price of €70

Inv. Num. : 7472 Type: UPFS 150-117 Producer: DOEBELI Created: 1995 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 mm Equipment: Filtration Coolant tank

Inv. Num. : 7462 Type: G130 Producer: Göckel Created: 1987 Parameters: Control system: Sinumerik 810 Table length: 7500 mm Table width: 1000 mm Machine height: 3500 mm Machine length: 15000 mm Machine width: 3500 mm Machine weight: 45000 kg Equipment: 500 ceramic and 500 bakelite grinding segments 2016: Conversion of the control system to Sinumerik 810

Grinding wheel dimensions: 300mm, Main motor power: 5.31 kW, Dimensions: mm 2200 x 1250 x 1600 mm, Weight: 2,200 kg. The additional costs are dismantling and loading costs.

Inv. Num. : 7463 Type: G80 Producer: Göckel Created: 1987 Parameters: Table length: 3100 mm Table width: 400 mm Machine height: 2000 mm Machine length: 8000 mm Machine width: 3000 mm Machine weight: 14000 kg

NC control 2 axes Maximum workpiece dimensions: 400 mm Grinders included

Inv. Num. : 7464 Type: G100 Producer: Göckel Created: 1987 Parameters: Table length: 2500 mm Table width: 600 mm Machine height: 2300 mm Machine length: 7000 mm Machine width: 3000 mm Machine weight: 14000 kg

Inv. Num. : 7466 Type: AR61 Producer: Reform Created: 1988 Parameters: Control system: Simatic Table length: 2500 mm Table width: 600 mm Machine height: 2400 mm Machine length: 11000 mm Machine width: 3200 mm Machine weight: 22000 kg 2021: Conversion of the control system to Simatic and overhaul of the Z-axis

In 2014 mechanically komplett überholte Maschine; -Anschließend sehr wenige Stunden im Einsatz; -Nun umgebaut auf neue BEMA X Steuerung; -Die Bedienung über das Touch-Panel ist denkbar einfach; -Die Symbolik auf der Steuertafel ist practically identisch mit der ursprünglichen Steuerung somit entfällt die Einarbeitung; -Diagnosefunktion mit Anzeige von SPS Hinweisen und den digitalen I/O; -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0.5my; -Drehzahlregelung für die Schleifspindel; Including:; -Servant sow; -Spannrohr für Futter. das Los wird kostenlos auf Lkw verladen.

Inv. Num. : 7411 Type: R6-5000 Producer: Kolb Created: 1981 Parameters: Grinding diameter: 605 mm Maximum weight of the workpiece: 3000 kg Distance between tips: 5000 mm Machine weight: 17900 kg

Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg

This lot has been tested for function

Inv. Num. : 7459 Type: GU-A Producer: LINDNER Generated: Parameters: The mill is in good condition.

Surface Grinding Machine Surface Grinder Grinding Machine Manufacturer: Somaco Type: C60 Travel: 500x200x300mm T-slot table: 720x220mm Incl. magnet

Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg

Tool grinding machine, drill bit grinding machine, grinding machine; -Manufacturer: FAMO Fr. Aug. Münzenmaier Maschinenfabrik; -Type: ST/100V; -1 disc diameter approx. 320 mm; -1 cup discs diameter approx. 240 mm ; -Table: approx. 550 x 340 mm.

Inv. Num. : 7323 Type: BUAJ 30 Producer: Junker Created: 1999 Parameters: Table dimensions: 1380x160 mm Distance between tips: 630 mm Machine weight: 2800 kg

Vierspindlige Honmaschine eingerichtet zum Honen von Gewehrläufen. Honbereich laut Hersteller: Durchmesser: 5-45mm Maximum Honlänge: 750mm Accessories: Werkzeuge für Durchmesser -10mm -12.3mm -13.3mm -21.1mm Heating costs für das Gerät: 3000�