subcategories wood working machines

cat.-No. 2nd category level results
205 boring mills, machining centers 578
207 gluespreader machines 604
204 grinding machines 633
208 lacquer machines 519
202 milling machines 649
209 other wood working machines 1,658
212 peripheral equipment (e.g. heating, conveying, drying) 628
203 planing machines 509
206 presses 310
201 saws 1,095
213 spare parts for wood working machines 670
211 veneer machines 119
210 window production machines 135
200 all wood working machines order by entry date descending 8,475

Banner ad information  

latest results wood working machines

212 peripheral equipment (e.g. heating, conveying, drying)
Entry date: 28.03.2024 item-No.: 163673291
approved
dealer
New in: 2010

used

check Seller:
Location: 57610 Altenkirchen Land-de
Price: 1.850 € add to watchlist

used Wego Späneabsauger Exhaust fans. Fan for chip transport

209 other wood working machines
Entry date: 28.03.2024 item-No.: 163673287
approved
dealer
New in: 1996

used

check Seller:
Location: 63599 Biebergemünd Land-de
Price: 6.000 € add to watchlist

used WEIMA WL 4 Wood shredding systems. Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

201 saws
Entry date: 28.03.2024 item-No.: 163673271
approved
dealer

used

check Seller: DH Maschinenhandel
Location: Land-de
add to watchlist

used Pehaka 700 Belt saws. Tape roll diameter 700 mm Workpiece height maximum approx. 400 mm Maximum passage width approx. 780 mm Motor power 2.9 kW Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

204 grinding machines
Entry date: 28.03.2024 item-No.: 163673266
approved
dealer
New in: 1980

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de
add to watchlist

Key data: 1100 mm

used OTT RSK-0 Wide belt grinding machines. Grinding width 1100mm Passage height min./max. min. 3mm / max. 150mm Aggregates 1-Belt Combi Unit Roller / Shoe Feed rate 4+8m/min Total connected load 17 kW Abrasive belt W x L 1120x1900mm Extraction connection Ø 200mm / 140mm Weight 2000kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

202 milling machines / Tilting spindle moulders
Entry date: 27.03.2024 item-No.: 163667049
approved
dealer
New in: 1993

used

check Seller: Ermaier Holzbearbeitungsmaschinen
Location: 85416 Oberhummel Land-de
Price: 4.750 € add to watchlist

used FELDER F38. Classifieds Home & Garden DIY Your Ad Visits: 17 Wishlist: 0 Ends on: 26.05.2024 Edit Reserve Lengthen Delete Print a sales sign Highlight Ad Duration Price Push up Get new attention! Your ad will look like a new ad. one-time 3,95 € Highlight: Up to 2x more visibility! Your ad will be highlighted in color. 7 days 4,95 € Up to 5x more visibility! Your ad will be pushed up every day for a week. 7 days € 16.95 Up to 10x more visibility! Your ad is at the top of the list! 7 days € 19.95 Gallery: Up to 15x more visibility! Your ad will appear on the home page! 10 days € 49.95 All prices incl. VAT. Swivel Spindle Milling Machine FELDER F38 Rotary Milling Machine Table Milling Machine Feed in Langenbach Swivel Spindle Milling Machine FELDER F38 Swivel Milling Machine Table Milling Machine Feed €5,652 Pick-up onl ...

212 peripheral equipment (e.g. heating, conveying, drying) / Timber crushers
Entry date: 27.03.2024 item-No.: 163666362
approved
dealer
New in: 1994

used

check Seller: Schreinerei Faessler
Location: Bozen Land-it
Price: 7.000 € add to watchlist

used Weima WL 4. Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor

207 gluespreader machines / Edge gluing machines
Entry date: 27.03.2024 item-No.: 163665569
approved
dealer

used

check Seller: Sixt Holzbearbeitungsmaschinen GmbH
Location: 8501 Lieboch Land-at
add to watchlist

used HOLZ HER Auriga 1304 FÜ + PU. •Compact design - edge thickness 0.4 - 6 mm •Control panel with selector switch for adjusting the units •Pre-milling unit for attachment in front of the gluing part •Fully automatic edge magazine for rolls and strips •Adhesive application station cartridges + PU gluing •Workpiece height 6-60 mm •Printing unit pneumatic •Cross-cut unit 1918 pneumatically for rolls and strips up to max. 6 mm edge thickness •with pneumatic changeover from 0-10° inclined of the cross-cut saws • Milling unit flush milling 6 mm, radius milling 3 mm, bevel milling - 15° •Scraper unit for chamfers and radii with 2 scraper blade carriers •pneumatic engagement and disengagement •Surface Scraper Unit - Finish •Machine WORKSHOP overhauled in TOP CONDITION from stock Lieboch

205 boring mills, machining centers / Automatic Drillers
Entry date: 27.03.2024 item-No.: 163665552
approved
dealer

used

check Seller: fwb-Maschinenhandel GmbH
Location: 32683 Barntrup Land-de
Price: 1.950 € add to watchlist

used Nottmeyer. Automatic drilling machine Nottmeyer Working length 3500 mm Working width 750 mm 4 drill beams from below 2 drilling units with 9 – 11 drill bits at 32 mm intervals per drill bar. 1 drill beam left with 2 drilling units 1 drill bar right with 1 drilling unit Each driven by a 1.1 kW motor Including many other multi-spindle drill heads 3 drill heads with 3 receptacles 5 drill heads with 5 receptacles 11 drill heads with 9 mounts 4 drill heads with 11 receptacles 1 piece in T-pitch with 10 mounts And other accessories Dimensions 4400 mm x 1100 mm x H 1750 mm

203 planing machines / Four-sided planing machines
Entry date: 27.03.2024 item-No.: 163665508
approved
dealer
New in: 1991

used

check Seller: Baldin SRL
Location: Land-it
add to watchlist

used SCM SUPERSET 23. SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

201 saws / Miter saws
Entry date: 27.03.2024 item-No.: 163665506
approved
dealer

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it
add to watchlist

used STROMAB CT 800. Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200  ...

204 grinding machines / Edge sanding machines
Entry date: 26.03.2024 item-No.: 163657388
approved
dealer

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it
add to watchlist

used DE STEFANI MVT 1000. Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100

202 milling machines / Chain mortising machines
Entry date: 26.03.2024 item-No.: 163656590
approved
dealer

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
add to watchlist

used HAFFNER KF 20. Technical details: - Mortise depth: 150 mm - Max. slit length: 220 mm - Max. chain width: 40 mm - Longitudinal table movement: 160 mm - Table transverse movement: 90 mm - Inclination: 5° - with 1 x chain (mounted) - with sheet steel stand - with oil lubrication device - with quick adjustment - with instruction manual Engine data: - Three-phase motor, consumption: 2.2 kW - Power, output: 1.5 kW - Voltage: 220/380 V - Current: 6/3.5 A - Frequency: 50 Hz - Speed: 2,800 rpm Dimensions (LxWxH): Transport dimensions: Machine weight: 72 kg Weight of sheet steel stand: 35 kg The machine has been completely cleaned, overhauled and checked for correct functioning. It is supplied with a mounted connection cable with a 16A three-phase plug. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms a ...

209 other wood working machines / Wood shredding systems
Entry date: 26.03.2024 item-No.: 163656448
approved
dealer
New in: 2016

used

check Seller:
Location: Land-de
Price: 10.400 € add to watchlist

used Zeno Maschinenbau ZTLL 800 x 1000. Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition

201 saws / Joiners circular saws
Entry date: 26.03.2024 item-No.: 163656418
approved
dealer
New in: 2000

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 3.500 € add to watchlist

Key data: 45 °, 3200 mm, 1200 mm

used LAZZARI Juno 3200. Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, th ...

203 planing machines / Four-sided planing machines
Entry date: 26.03.2024 item-No.: 163656417
approved
dealer
New in: 2001

used

check Seller: Ledinek Maschinen und Anlagen GmbH
Location: Land-fi
VS add to watchlist

Key data: 4 mm, 80 , 20

used LEDINEK STRATOPLAN 300 4V-S420. Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

201 saws / Joiners circular saws
Entry date: 26.03.2024 item-No.: 163656397
approved
dealer

used

check Seller: fwb-Maschinenhandel GmbH
Location: 32683 Barntrup Land-de
Price: 1.200 € add to watchlist

used Panhans 685A. Sliding Table Saw Sizing Saw Make Panhans Type 685A Machine No. 371554 Built in 1973 Sliding carriage length 2600 mm Sliding carriage with new rollers in the guide Cutting width to the right of the saw blade 1000 mm Motor power 5.5 kW Speeds 3000/4000/6000/8000 rpm. Adjustable via V-belts Saw blade bore 30 mm Saw blade diameter with splitting wedge maximum 350 mm Saw blade without splitting wedge maximum 450 mm Cutting height for saw blade diameter 450 mm, maximum 155 mm Cutting height for saw blade diameter 350 mm, maximum 105 mm Dimensions 2600 mm x 3200 mm x H 900 mm Shipping Dimensions 2600 mm x 1700 mm x H 1200 mm Weight with pallet 680 kg

207 gluespreader machines / Edge gluing machines
Entry date: 25.03.2024 item-No.: 163650197
approved
dealer

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it
add to watchlist

used CEHISA BRYKO. Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430

209 other wood working machines
Entry date: 25.03.2024 item-No.: 163650191
approved
dealer
New in: 2018

used

check Seller: Restart Used Machinery GmbH
Location: 40472 Düsseldorf Land-de
Price: 110.000 € add to watchlist

used Innovativ Vision WoodEye 6 SortCut Scanners for optimisation and sorting. Scanner WoodEye 6 SortCut Model: W6-SC-4444RR with inlet and outlet mechanization, manufacturer Invenir The scanner was only in production for 12 months. Equipment WoodEye 6: 4-Sided Grayscale Analysis 4-sided color analysis 4-sided profile measurement 4-sided roughness analysis 4-Sided Fiber/Texture Analysis/Angle Measurement for hard and softwood Optimization for 4 finishing products The WoodEye scanner is equipped with a UPS for the computers to provide a controlled shutdown in the event of a power outage Invenir mechanic: Infeed and outfeed conveyors with double belts on both sides and pneumatic pressure. All four belts are driven together by a motor with adjustable speed Subject to changes, errors and prior sale

209 other wood working machines / Suction units
Entry date: 25.03.2024 item-No.: 163650109
approved
dealer
New in: 2007

used

check Seller: Alfred Feldmann Werkzeugmaschinen
Location: 64720 Michelstadt Land-de
add to watchlist

Key data: 160 mm, 2 kW, 1780 m³/h

used NESTRO NE 160. - Suction nozzle diameter: 160 mm - Flow rate: 1780 m³/h - Filter area: 11.5 sqm - Total power: 2.2 kW - Machine weight: 380 kg - Space requirements (W x D x H): 1.3 x 0.86 x 1.96 m - Condition: very good Details for continuous operation, for extracting dry wood dust and wood chips Accessories Documentation, 4 used collection bags

209 other wood working machines / Macerators
Entry date: 25.03.2024 item-No.: 163650107
approved
dealer

used

check Seller: Kuno Floeter e.k.
Location: 67122 Altrip Land-de
Price: 7.500 € add to watchlist

used Pallmann PZC 8-300. Pallmann wood mill PZC 8-300, unused condition, without grinding wheel, external grinding cage and motor available. Weight approx. 3.5 to.

204 grinding machines / Wide belt grinding machines
Entry date: 25.03.2024 item-No.: 163650099
approved
dealer
New in: 1992

used

check Seller: Maschinen-Kaul GmbH & Co.KG
Location: 40549 Düsseldorf Land-de
add to watchlist

Key data: 950 mm, 1 , 150 mm

used BÜTFERING ECO 950. - Combi grinding unit with calibration roller and sanding pad - Working width 950 mm - Sanding belt width max. 970 mm - Sanding belt length 1,700 mm - Workpiece thickness max. 150 mm - Feed speed 4 and 8 m/min - Motor power 7.5 kW - Feed motor 0.45/0.6 kW - Height adjustment 0.2 kW - Suction nozzle Ø 160 mm - Compressed air connection 6 bar - Air requirement approx. 10NL/min - Electrical connection: 380 V, 50 Hz, 20 A - Dimensions: approx. 1,775 x 1,570 x 1,830 mm - Weight approx. 1,000 kg Technical data subject to actual equipment

204 grinding machines / Wide belt grinding machines
Entry date: 23.03.2024 item-No.: 163637431
approved
dealer
New in: 2019

used

check Seller: Tischlerei Bracht GbR
Location: 40764 Langenfeld Land-de
Price: 72.000 € add to watchlist

Key data: 1350 mm

used Homag - Bütfering Sandteq W200 - SWT 225 CH. Automatic calibration and fine grinding, wide belt grinder with Super Finish unit, brushing unit and practically full equipment A video of the machine running can be sent on request. Two-belt machine with combination unit, super-finish unit with internal lamellar belt and interchangeable brush unit Ideal automatic sanding machine for interior finishing companies with a wide range of applications from calibration, fine sanding, paint sanding to structuring. 1. Aggregate: C-unit 15kW as a combination unit with grooved steel roller and articulated sanding pad with 25mm segment width Contact roller can be pneumatically adjusted, low wear due to steel roller Pneumatic workpiece-controlled belt blow-out device adjustable in 5 steps for controlled compressed air demand Belt speed frequency controlled from 2 - 18 m/s 2. Aggreg ...

203 planing machines / Surface planing and thicknessing machines
Entry date: 23.03.2024 item-No.: 163637378
approved
dealer
New in: 1998

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: Land-de
Price: 9.200 € add to watchlist

Key data: 520 mm, 250 mm, 5 kW

used SCM FS 520. Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The  ...

204 grinding machines
Entry date: 23.03.2024 item-No.: 163637366
approved
dealer
New in: 1990

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 2.500 € add to watchlist

used Zimmermann FZ OZS Oscillating Roll Grinding Machine. Used Oscillating Roll Grinding Machine Manufacturer: Zimmermann Type FZ OZS Table size 500 x 500 mm Height adjustment 70 mm Swivel range 20/30° Weight approx. 160 kg with large batches of various rollers Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, wit ...

206 presses / Veneering presses
Entry date: 22.03.2024 item-No.: 163630547
approved
dealer

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it
add to watchlist

used COLOMBO 13/8. Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

206 presses / Veneering presses
Entry date: 22.03.2024 item-No.: 163630506
approved
dealer

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it
add to watchlist

used KOLMAG PGP 120. Code: 0249 Brand: KOLMAG Model: PGP 120 Hydraulic hot press for veneer, furniture, custom-made furniture, doors, wooden panels, coated panels, chipboard, composite materials, Mdf, solid wood, cork, plastic laminates, technological materials, aluminium, etc. Technical data: Platen dimensions mm 3500 x 1300 N°6 pistons Total pressure ton 120 Platen heating by water boiler Opening between platens mm 400 Hydraulic unit Perimeter emergency cable Overall dimensions mm 4200 x 1600 x 2300 h Weight kg 4000

201 saws / Circular sawing automats
Entry date: 22.03.2024 item-No.: 163630473

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl
add to watchlist

used Metal Technika OWD 1600 optimizer. Optymalizerka Metal Technika OWD 1600 - produkcji Polskiej - rok produkcji 2017 PARAMETRY TECHNICZNE: - szerokość cięcia 250 mm - wysokość cięcia 120 mm - Wydajność Od 3 200 do 8 150 mb /8 h - stół sortujący z 5-ma wybijakami - Elektronika Sterownik z wyświetlaczem dotykowym kolorowym „MITSHUBISHI” - Funkcje - pełna optymalizacja 30 wymiarów w dwóch klasach jakości, - tworzenie programów cięcia dla różnych klientów, - ciecie w miejscu zaznaczenia kredką fluoroscencyjną, - obcinanie marginesu (początek i koniec materiału wejściowego) - cięcie pakietami (kilka elementów na raz) - liczniki metrów, total, zmiany, operatora, miesięczny, - dokładność cięcia ±0,2 mm - Silnik 5,5 KW (piła Ø500 – 140z) - Szerokość mat. wejściowego 12 - 250 mm max. szer/wys ( 250 / 50 mm) - Wysokość ma ...

203 planing machines / Four-sided planing machines
Entry date: 22.03.2024 item-No.: 163630471

used

Seller: StanDrew
Location: 83-33 Miechucino Land-pl
add to watchlist

used REX U 41K. REX U 41K four-sided planer - German production - DTR - numerical control - year of production 1997 - milling heads - for wet wood - total power 51.5 kW TECHNICAL PARAMETERS: - planing width 410 mm - planing height on 2nd and 4th side 260 mm - electronic adjustment of planing height and width with the possibility of programming fixed dimensions 1 lower shaft 7.5 kW 2 upper shaft 11 kW 3 right spindle 7.5 kW 4 left spindle 11 kW milling units 2 x 1.85 kW - feed smoothly adjustable electrically - feed speed range 5-30 m/min - 3 kW feed motor - five pull rollers in the tabletop - two auxiliary rollers in the tabletop - five upper pulling rollers - four pressure rollers on vertical spindles - pneumatic side pressure of the material - adjustable heads - adjustable lower shaft - minimum material length 400 mm Transport dimensions 420 x 230 x 230 ...

202 milling machines / Top-spindle moulders
Entry date: 21.03.2024 item-No.: 163624152
approved
dealer
New in: 1986

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 1.250 € add to watchlist

used Zimmermann FZ 0. Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment o ...

202 milling machines / Top-spindle moulders
Entry date: 21.03.2024 item-No.: 163624151
approved
dealer
New in: 1987

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 2.300 € add to watchlist

used Zimmermann FZ 1. Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our  ...

204 grinding machines / Profile grinding machines
Entry date: 21.03.2024 item-No.: 163624150
approved
dealer

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 1.000 € add to watchlist

used Zimmermann FZ PS 1/2. Used Profile Grinding Machine Manufacturer: Zimmermann Type FZ PS 1/2 Power 1.6 kW Total weight approx. 400 kg With abb. Sharpening rods Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift/crane for loading is available. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders an ...

204 grinding machines / Disc sanding machines
Entry date: 21.03.2024 item-No.: 163624126
approved
dealer
New in: 1980

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: 59425 Unna Land-de
Price: 2.500 € add to watchlist

used Zimmermann FZ SZ 3. Used disc sander Manufacturer: Zimmermann Type FZ SZ 3 Built in 1980 Diameter 900 mm Power 4 kW Speed 720 rpm. Weight approx. 600 kg Table swivel 20° up, 30° down Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies  ...

202 milling machines / Spindle moulders
Entry date: 21.03.2024 item-No.: 163624111
approved
dealer
New in: 2004

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
add to watchlist

used ELEKTRA BECKUM TF 100 M. Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer).  ...

209 other wood working machines / Extraction Systems
Entry date: 21.03.2024 item-No.: 163624110
approved
dealer

used

check Seller: fwb-Maschinenhandel GmbH
Location: 32683 Barntrup Land-de
Price: 950 € add to watchlist

used Nestro NE 160. Extraction system Nestro Mobile extraction system Type NE 160 Built in 1993 Mobile on castors with With mobile dust barrel Extraction connection diameter 160 mm Filter area 11.5 m² Nominal flow rate 1900 m³/h Motor power 2.2 kW Dust barrel capacity 185 liters Dimensions 1450 mm x 850 mm x H 1950 mm Weight approx. 240 kg

206 presses / Veneering presses
Entry date: 21.03.2024 item-No.: 163624097
approved
dealer

used

check Seller: fwb-Maschinenhandel GmbH
Location: Land-de
Price: 3.800 € add to watchlist

used Ott JU 65. Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

201 saws / Cutting-off saws
Entry date: 21.03.2024 item-No.: 163624087
approved
dealer

used

check Seller:
Location: 22066 MARIANO COMENSE Land-it
add to watchlist

used STROMAB PS 45. AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

203 planing machines / Four-sided planing machines
Entry date: 21.03.2024 item-No.: 163624085
approved
dealer

used

check Seller:
Location: 22066 MARIANO COMENSE Land-it
add to watchlist

used GUILLET KXR. 4 SIDE PLANER machine model GUILLET KXR with n.4 spindles second hand machine in Excellent working condition - Composition : 1° shaft : surface planer . motor power Hp 7,5 2° and 3° shaft : spindle moulder . motor power Hp 7,5 4° shaft : thickness planer . motor power Hp 7,5 inlet length mm. 2000 feed speed: from 4,5 to 27 mt./min . motor power Hp 2 automatic lifting. motor power Hp 0.35 vertical and horizontal movement of 2nd and 3rd shaft vertical and horizontal movement of 4th shaft max. useful working width mm. 220 max. useful working height mm. 120 weight kgs. 1600 volt. 380/50

207 gluespreader machines / Edge gluing machines
Entry date: 21.03.2024 item-No.: 163624082
approved
dealer

used

check Seller:
Location: 22066 MARIANO COMENSE Land-it
add to watchlist

used BIMATIC B 220 IR-S. EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

202 milling machines / Copy milling machines
Entry date: 21.03.2024 item-No.: 163624076
approved
dealer

used

check Seller:
Location: 22066 MARIANO COMENSE Land-it
add to watchlist

used PADE UINZE 2300 2T. COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

205 boring mills, machining centers / Numerically Controlled Machining Centres
Entry date: 21.03.2024 item-No.: 163624073
approved
dealer

used

check Seller: TOMESANI Srl
Location: Land-it
add to watchlist

used SCM ROUTRON 921. Code: 0247 Brand: SCM Model: ROUTRON 921 CNC Router for universal use on wood materials, panels, furniture, composite materials, plastics, plexiglass and various Composition: Router - Motor Hp 10 - Rpm 12000/18000 - attachment CM2 3-spindle drilling unit - Motor Kw 0,66 - Rpm 3450 Technical data: Worktable dimensions mm 2135 x 915 Axis stroke X mm 2135 Axis stroke Y mm 915 Axis stroke Z mm 300 Vertical travel for head setting mm 200 Pneumatic rise and fall of heads mm 100 Vacuum pump m3 100 Overall dimensions mm 3250 x 2200 x 3000 h

back