zubler used for sale

: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...

Grossentstauber, Filteranlage mit Zubehör, Motoren, Luftkanälen; Filterhaus mit Filteranlage; Je Element 36 Gewebefilterschläuche, mit viel Zubehör, elektrom. Abrüttelung, Ventilatoren, Lufttransportkanäle, Aluwetterschutzverkleidung; Erstinbetriebnahme: 1987; Electric motors: 3 Stück wie auf Bildern; -Gewebefilterschläuche: 36 Stück; -Durchmesser: 270 mm; -Filterfläche Antriebselement: 90 q2m; -Filterschlauchlänge: 3,000 mm; -Anschlusswert: 47 kW; -Technische Unterlagen, Herstellerangebot und Grundriss vorhanden; -Verladung auf Lkw durch Käufer ohne weitere Kosten für Verkäufer; -Großer Gabelstapler zur Lkw-Verladung vorhanden. (5 Tons)

Stainless steel tank with agitator, 2,400 l

Container/ tank made of ALU, square, 475 l

Containers mit Zubehör für MWM Typ TCG 2020 V12 (bis 1,2Mwe) Es gibt eine vollständige Dokumentation. 2012 Jahr. Nach dem Entfernen des 2020V12-Motors. Es gibt einen Schornstein für das Set. Es gibt keinen Abwärmetauscher, externen Kühler, zwei Module in der Steuerung.

We offer spare parts and accessories for hose pouring machines. Visit our homepage: www.protech-web.de

for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production

We offer original Doka slab formwork accessories. Everything controlled and sorted. Immediately ready for use! 377 pieces Doka fork head, gebr. 11,50€/ pcs 78 pieces Doka lowering head, gebr. 16,00€/pcs. 47 pieces Doka Tripod, gebr. 25,00€/pcs. 2 x Doka lattice box, gebr. 1,70x0,85m 150,00€/pcs. 5 x Lattice box, gebr. 50,00€/pcs. Prices plus VAT & transport! If you have any questions about 0176, Mr. Becker 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

-with 2 flour spreaders -Total length 680cm -with rollers

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Lynets, scanners, counter bearings -Weight: 25 kg

Industrial sewing machine, sewing machine, high-speed sewer, industrial high-speed sewer -Manufacturer: Global / HO HSING, industrial sewing machine -Type: unfortunately no type designation -Electronic components: HO HSING -Accessories: included, see photos -Dimensions: 1050/550/H1550 mm -Total weight: 74 kg

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Accessory trolley for welding table, 3D welding and assembly tables -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

diameter range 7,75 mm cutting length 360 mm number of slides 2 punching power 80 to width of band max. 80 mm

Description: Additional information: Various turning and milling accessories from D'Andrea consisting of a case with contents + various accessories. Suitcase: - boring bar (B3.06 / B3.08 / B03.11 / B3.16 / B3.22 / P25.63), - Plate holder / tool clamping screws various accessories: - Tool holder TR 200 - Accessories for tool holders (PS33.32 TRE 80 / PS33.28 TRE 80) - Plate holder (SFCC 50 / SSCC 63 / SSCC 80 / SSCC 90) - Counterweight CW 200 - TS roughing heads (TS 25/25 / TS 32/32) + insert holder - Tool clamping screws D'ANDREA S.p.A. is an Italian company that is a world leader in the Manufacture of high-precision accessories for machine tools. It was 1951 founded by MarinoD’Andrea, who began his activity with the introduction of the first facing and drilling head (TA). The D'Andrea brand is international recognized brand, which is represented by a distribution network present in ov ...

Description: Additional information: Various turning and milling accessories from D'Andrea consisting of various accessories - Basic recording DIN69871-AD+B50 MHD’80.180 (Code 416800105025) = 2 pieces - Basic recording DIN69871-A50 MHD’80.62 (Code 416800105020) = 1 piece - Basic recording DIN69871-AD+B50 MHD’63.150 (Code 416630105028) = 2 pieces - Basic recording DIN69871-AD+B50 MHD’50.120 (Code 416500105028) = 1 piece - Basic recording DIN69871-A50 MHD’63.56 (Code 416630105020) = 1 piece - Basic holder DIN69871-A50 MHD’50.48 (Code 416500105020) = 4 pieces - Roughing machining head, TS 80/80 (Code 455408001400) = 1 piece - Roughing machining head, TS 63/63 (Code 455406301250) = 1 piece - Roughing machining head, TS 50/50 (Code 455305001000) = 1 piece - Centesimal machining head, TRC 80 (code 455018001201) = 1 piece - Extension, PR 80.80 (code 656908000800) = 1 piece - Extensi ...

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

Thread cutting: M3 - M27 Speed: 70/220 rpm Working radius: 300 - 1900 mm Construction parallel arm: Stable arm structure made of hard aluminium profile (58x40) Weight: 39 kg Zubehoer: 6 slip couplings of your choice

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Canon IR C2380i Multifunction Device (Copy-Print-Scanning-Faxes) Dimensions (W x D x H) 56.5 x 75.5 x 79.1 cm Weight approx. 116 kg Type: Colour multifunction system, on mobile cabinet Function: Color Copier Network Printer Scanner Fax Duplex Condition: used, only maintained by Canon specialist service partner Format: up to A3 Paper feed: 2x paper trays + single feeder Technical data: > Maximum original size DIN A3 copy sizes > Cassette 2x drawer caspers A5SR to A3, A3+ (305 x 457 mm) > Stacking system DIN A5R to DIN SRA3 (320 x 450 mm), envelopes, 99 x 140 mm to 320 x 457 mm > Resolution: Scanning 600 x 600 dpi Copy 600 x 600 dpi Print 1,200 x 1,200 dpi (text/line, half speed, optional) Color depth 256 grayscales > Copy/print speed DIN A4 B/W: 23 ppm Colour: 23 ppm DIN A3 B/W: 15.5 ppm Colour: 15.5 ppm/min. > Zoom mode 25% to 400 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

Screw vacuum pump Running Status: As good as new Performance: 12 months Zubehoer: User manual delivery time: ex stock; ready for use

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

Hydraulic punching and cut-out machine Indumasch punching force max.: 40 t Blechstaerke max.: 10 mm Stroke number: 150 p / min Punch ing diameter max.: 105 mm working area in transverse direction = x: 1000 mm working area in the direction of loading = y: 750 mm Position accuracy: 0.1 mm Total weight with table approx.: 3500 kg incl. Zubehoer under the river to visit; ready for immediate use

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

Rotary vane compressor - running dry Manufacturer: Becker Type: KDT 3.140 motor: 400V 7.5 KW/50Hz suction power: 140m3/h Compression pressure: 2500 mbar (abs.) 1500 (overprint) Status: Generalueberholt and repainted Procurement: 12 months Zubehoer: - User manual We are happy to answer any questions you may have. ready for use

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

Waelz piston pump (roots blow- Status: Preliminary performance, as good Manufacturer: Edwards Type: EH 1200 Gewaehrleitung: 12 months Zubehoer: User manual Delivery time: from stock; ready for use

Power: 11kW, mit Zubehör, without solder tin und computer, the camera of the machine is defective.

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use

Rotary vane vacuum pump single-stage Status: Generalueberholt Gewawting capacity: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Kat. No.: 10906 Engine: 400V equipment: mineraloile nominal suction glit: 65 m3/h Final pressure: approx. 0.08 mbar (abs.) Zubehoer: operating instructions, oil filling (mineral oil) delivery time: ex works; ready for use

Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Lock valve vacuum pump E250 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: E250 Engine rated power: 5.5KW nominal suction digesters: 290m3/h Final pressure without gasb.: 4x10e-2 Zubehoer: Operating instructions with spare parts list Delivery: short-term

Zubehoer: filter system with pump control cabinet The machine is equipped with a Hirschmann deflection head, H 1.2 system, Orbi-Cut System 3 R

Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz suction power: approx. 30 m3/h end pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Generalueberholt Performance: 12 months Zubehoer: User manual mineraloel filling Quantity: several available delivery time. ready for use

Rotary vane vacuum pump manufacturer: Pfeiffer Type: BA251 Status: Generalueberholt Gewaehrl: 12 months Zubehoer: User manual equipment: mineral oil or by arrangement suction power: 250 m3/h end pressure with gasb.: approx.: <5x10e-1 hPa (mbar) delivery time: approx. 1-3 weeks and more Delivery: ex works; ready for use

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump

Rotary vane vacuum pump running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz suction power: 140m3/h end pressure: 100mbar (abs.) corresponds 90% vacuum Status: Generalueberholt Zubehoer: Vacuum filter mounted; User manual Further details or technical advice via request; ready for use