Table diameter: 1250 mm Turning diameter: 1600 mm Turning height: 900 mm Motor power: 45 HP/kW Positions ATC: 0   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18-T Work load 5000 Kg Package BT 50 tool holders Tool size L 380 x 50 Kg Closed housing with front door Free 03.2022 Max. turning Ø:               1.600mm Table  Ø:                     1.250mm Horizontal movement support:  900mm ATC / revolver:               12 Single column or double column:singel  Speeds / ranges:               ...

Table diameter: 2000 mm Turning diameter: 2500 mm Turning height: 1600 mm Motor power: 0 HP/kW Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18 iM Make You Ji 2 Type ATC 2000 - 2 Year Aug 2007 Fanuc 18 iM Centre height (mm)Table = 2.000 Center distance (mm)Swing = 2.500 Spindle bore Height = 1.600 Load = 10.000 ATC 12 positions Bt 50 Chip conveyor  

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC vertical lathe Swing diameter 850 mm Turning diameter 750 mm Turning height 600 mm CNC Controller fanuc  ...

• more information

CNC Horizontal Lathe GURUTZPE Manufacturer: Gurutzpe YOM: 1974 retrofit 2010 Control: Siemens Sinumerik 820 Turning diameter: 1.380 mm Distance between centers 5.000 mm Center height: 600 mm Swing over cross slide: 1.100 mm Max workpiece weight: 17.000 Kg The tailstock is in the offer, stamds next to the machine – not visible on the photo

Type DP 4000 Special facing lathe which has been converted to Siemens CNC for making internal conical threads Chuckdiameter: 3700 mm Siemens 840D Thread inserts are included, these are used to test if the thread has been correctly turned on the workpiece.  ...

• more information

HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X ...

Dart Mind TC220 CNC, CNC lathe, CNC Model Fanuc, CNC version 0-T, Main spindle nose ASA 6, Power main spindle 11 Kw, Main spindle chuck diameter 250 mm, Main spindle bar diameter 51 mm, Main spindle RPM 4000, Max turning diameter 350 mm, Max turning lenght 500 mm, Gear box yes, Number of speed 2, Number of turrets 1, Number of fixed toolholders in 1th turret 12, X-axis travel 1th turret 170 mm, Z-axis travel 1th turret 400 mm, Tailstock yes, Quill tailstock travel 60 mm, Cheap conveyor Hinged Belt, Presetting yes, 2001, Length 3640 mm, Width 1850 mm, Height 2000 mm, Weight 5500 Kg

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations  ...

• more information