We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 212)
used
Type: Conveyor with modular belt Condition: after renovation Length: 5000 mm Available quantity: 2 pieces Width: 440 mm Belt width: 410 mm Band thickness: 16 mm Pitch: 52 mm Shaft for gear motor: 30mm Prepared for legs: 60mm Price: 2900 EUR per piece
new
table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SPECIFICATIONS: Flow rate m3/h: 3,500 Number of bags: 3 - Ø 470 mm Number of filter bags: 24 - Ø 230 mm, height 2000 mm Installed capacity: KW 4.0
new
Power: 650 Watttank capacity: 5,5 llength: 515 mmwidth: 430 mmheight: 825 mmweight of the machine ca.: 36 KgProfessional 650 watt construction dryerRecommended room size 40 - 50 m², height max. 2.6 mSound pressure level approx. 52dBDehumidification capacity 28 L/D - 51 L/DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 1 m²
Type ASA 2403 Airflow 36 cbm/min. Connection 400 V 50 Hz Motor 1.1 kW Speed 2,850 rpm Suction nozzle 1 x 120 mm, 1 x 100 mm Dimensions: 90 x 48 x 210 cm • For milling, planing and sawdust (not suitable for dust) • 180° rotatable suction unit allows suction to be guided from below or above • Sturdy metal fan wheel • Chassis as standard for better stability and easy manoeuvring • Quick-release fasteners for filter and chip bag • Fine filter bag double woven • Chip collection volume 110 l • Filter area 1.92 m²
new
table length: 1300 mmtable width: 800 mmstroke height: 1015 mmweight max. in kg: 3000 kg: 220 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Length (m) 5.7 - Width (m) 1 - Roll width (cm) 85 - Height (cm) 95
height of stroke: 820 mm0: 1500 kgTable dimensions: 1300 x 800 mmstroke speed: 26 sec.0: 1,5 kwweight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 330 m², 7000 kg, 4600 mm
Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air
used
coolant capacity: 500 lFilter capacity: 800x900 mmdimensions of the machine ca.: 2x1,4x1,5 mtotal power requirement: kWweight of the machine ca.: 1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gebr. 1-Bag Suction FIELDS F3B YOC 1993 Motor power 2.2 kW (380V) Rated current: 4.3 A mobile Extraction connection: 120 + 80 mm (ideal for sliding table saw) The suction was tightly clamped. There is no on/off switch Dimensions: L 115 cm W: 55 cm H: 210 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.
Load per column: . 0Load per cantilever: . 0Cantilever lenght: 600-1000 mmRack height: 1500 mmwidth: 4000 mmCantilever rack 4 levelsThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.about usmore than 500 machines in stockover 8500 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
FIELDS AF-22 YOC 2003 Motor power: 2.2 kW (400V) Rated current: 5.3 A 2-Bag Suction 1 filter element Suction connection: 160 mm Wall incl. various pipe components (as shown) only complete - no retail sale without lattice box Dimensions according to manufacturer's specifications: 1,300 x 580 x 2,150 mm
new
table length: 1300 mmtable width: 800 mmstroke height: 190 / 1010 mmweight max. in kg: 2000 kgtotal power requirement: 0,75 kWweight of the machine ca.: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...
used
Diameter: 250 mmTotal length: 2500 mm: Nadelfilz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vibrating screen, motor approx. 5kW
used
used
4 pcs. Diameter 400 mm Width 960 mm Height 450 mm Different lengths
used
Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)
used
Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.
used
Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)
used
Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.
used
Mobile dust extractor Brand: SCHUKO Type: Vacomat 300 XP New machine Technical data: Connection Ø: 300mm Filter cleaning: pneumatic Volumen flow: 5950 m³/h Motor power: 7,5 kW Filter surface area: 32,0 m², Test sign H3 / BGHM HO 143032 Dust level M, AWN 16 Noise absorbation: 74 dB(A) Incl. switch box Schuko V22/23 incl. forklift consoles
new
Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU
used
mobile extraction Brand: Schuko Type: Vacomat 350 XP Twin Year: 2022 - Schukos biggest mobile extractor for wood dust - efficient use of power, due to second motor that switches on/off on demand Technical data: Test mark H3 / DGU HO 213001 Max. volumetric flow: 10,000 m³/h Nominal volume flow: 6,910 m³/h, 2,550 Pa Connection diameter: 350 mm Filter area: 50 m², dust class M, AWN 16 Cone Motor power: 2 x 5.5 kW Filter regeneration: pneumatic-mechanical Sound pressure level: 69dB(A) built according to EN 16770 incl. control cabinet with 2 frequency converters incl. 2 forklift consoles Pressure surge cleaning (without electrical control)
used
To turn the ini stakli ų nukrovimui i ų gluing. Length: 3000 mm. Width: 500 mm. 39 knives. The dimensions of the conveyor can be played under č ū kei į need.
used
Dust extractor brand: RIEDEX type: DM-350 P-B year: 2021 1 year warranty in single shift use (max. 1840 working hours) Technical data: - Version with chip drums, jet cleaning and with extinguishing device. - Filter area 49,6 m² - Max. volume flow 8.000 m³/h - Nominal volume flow 6,927 m³/h (negative pressure 2000 Pa) - Motor power 11 kW - Electrical connection 400V, 50 Hz, 3 phases, 32 A - Suction nozzle Ø 350mm - Residual dust content < 0.1 mg/m³, 72 dB(A) - Compressed air connection max. 7 bar - Weight 1320 kg
new
Included 2 containers, filter, roof. Without spec. floor Air inlet 4x300mm Air outlet 4x500-600mm Explosion protection
used
Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XP New machine Technical data: Connection Ø: 160 mm Filter cleaning: pneumatical (manual start) Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)