We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 205)
new
CNC controlled three-axis under-table cross-cut saw with additional drilling unit for wood and wood-like materials, but also suitable for sawing aluminium non-ferrous metals and plastics. Closed compact production island, low noise pollution and no chips in the machine environment. Our automatic sawing and drilling machine KA 550 CNC - SAW and DRILL is versatile einsetzbar_ – Only saws in automatic mode and for single cuts - Drilling only - Combines drilling and sawing in a single operation The possibilities to work with the drilling unit include drilling and countersinking, combined drilling + countersinking with a combination tool, drill milling of longitudinal holes – longitudinal holes transversely – rectangular cut-outs. The drill feed speed and the drilling pressure can be sensitively adjusted. Technical data Circular Saw and Drilling Machine KA 550 CNC - SAW an ...
new
Load Weight Shelf: 30000 kgLoading weight per level: 3000 kgNumber of load levels: 2 x 5 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
new
Load Weight Shelf: 15000 kgLoading weight per level: 3000 kgNumber of load levels: 5 Stk.Recommended material length: 6000 mmColumn width: 2 x 2000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Automatic drilling machine Nottmeyer Working length 3500 mm Working width 750 mm 4 drill beams from below 2 drilling units with 9 – 11 drill bits at 32 mm intervals per drill bar. 1 drill beam left with 2 drilling units 1 drill bar right with 1 drilling unit Each driven by a 1.1 kW motor Including many other multi-spindle drill heads 3 drill heads with 3 receptacles 5 drill heads with 5 receptacles 11 drill heads with 9 mounts 4 drill heads with 11 receptacles 1 piece in T-pitch with 10 mounts And other accessories Dimensions 4400 mm x 1100 mm x H 1750 mm
new
bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SPECIFICATIONS: Z-axis stroke mm: 1320 X-axis stroke mm: 2720 Y1 / Y2 axle stroke mm: 7700 Power of electrospindle KW: 12.0 (brushless motor) Tool clamping on cone: manual with collet Tool changer: HSK-63F 2 motorized roller conveyors for loading and unloading. Dimensions mm: 6200 x 350
new
Load Weight Shelf: 28000 kgLoading weight per level: 2000 kgNumber of load levels: 2 x 7 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: 3,7 x 2,55 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fabr: Scheer Type: BS 5102 Year: 1999 Power: 3.5kW Working width: 1500mm
new
bore capacity in steel (diameter): 40 mmthroat: 330 mmbore stroke: 190 mmspindle taper MT: 4 MKtable:: 500 x 400 mmcolumn diameter: 140 mmturning speeds: 90 - 1500 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 435 kg.range L-W-H: 570 x 930 x 2170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)
used
x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmControl: Siemens 480 D table width: 500 mmtable length: 2000 mmtotal power requirement: 16,25 kWweight of the machine ca.: 4750 kgdimensions of the machine ca.: 3000x 2500x 2800 mMachine number 9599- 4th axis / horizontal / diam. 315 mm- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions
new
bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Dowel drilling machine Schleicher Universal Drilling Machine Type BORFIX With swivel drill bar Drill gear with 9 drills 1.5 kW 2 pneumatic workpiece holders Drills from the top and back Cushion size 1000 mm x 530 mm Stop rail length 2000 mm Weight with pallet 185 kg Shipping Dimensions 1200 mm x 1020 mm x H 1700 mm
new
bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...
new
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm
new
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Long-hole drilling machine Height adjustment of the drilling support by hand wheel Deep movement of the drilling support by hand lever Lateral movement of the table by hand lever Table size 690 mm x 300 mm Chuck 3-16 mm Maximum drilling depth 150 mm With many drills Dimensions 1100 mm x 700 mm x H 1200 mm Weight 412 kg
used
working area: 5-40 x 1.000 mm- - -: - - - - - -- - -: - - - - - -Deep hole drilling machine | TIBO - tibo. E 40-1-1000The machine is in a very well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: tibo E 40 1 1000 | tibo E40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used pot belt drill MultiCo PM 16 HB for Hettich pot straps Attention Item location: 58368 Werne The machine can be viewed. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademar ...
used
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron: 36 mmspindle taper MT: 3 spindle turning speed - stepless: 140 - 1400 U/mintable-size: 500 x 360 mmcolumn diameter: 125 mmtotal power requirement: 1,5 kWweight of the machine ca.: 335 kgdimensions of the machine ca.: 500 x 800 x 1850 mmThe machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.Accesories:- Drill chuck- infinitely variable speeds- lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gebr. Hole row drilling machine GANNOMAT Mentor 25 YOC 1999 Motor power: 1.5 kW Rated current: 3.3 A Compressed air connection required: 6 - 8 bar Drill bar with 25 spindles 32 mm pitch Drilling unit can be swivelled 90° Working width: 768 mm Portal passage: approx. 900 mm Drilling stroke: 100 mm Position adjustment drilling unit: 0 - 45 mm Position adjustment of hole row: 0 - 300 mm Clamping height (max. workpiece thickness): 100 mm Tool shank diameter: 10 mm Working height: 850 mm 2 aluminium stop profiles (150 cm each) Fully automatic pneumatic control with foot valve via control console: Clamping + Drilling + Relaxing electr. Intermittent operation pneumatic stop comb Angular Error Compensation System Program selector switch for automatic and leak-out function incl. various drill bits Dimensions: 1.15 x 1.03 x 1.25 m Weight: 420 kg Sold in ACTUAL c ...
used
length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC Machining Center IMA BIMA 610/V Type 140/600 Machine in CE design Travel range in X 7700 mm Travel range in Y 1900 mm Travel range in Z 440 mm Working range in X-direction with standard units 6000 mm Working range in Y-direction with standard units 1400 mm Max. clamping height from the upper edge of suction plate Z1 100 mm Z2 depending on equipment / application
used
bore capacity in steel (diameter): 30 mmthroat: 210 mmbore stroke: 110 mmspindle taper MT: 3 speeds: 10 von 140-1800 U/mintable-size: 320 x 400 mmcolumn diameter: 100 mmdrill diameter: max. 31 mmDistance spindle/table max.: 710 mmtotal power requirement: 1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,4 x 0,7 x 1,73 mElectric 380 Volt: Column drilling machine with manual feed, speed regulation viaStep discs and 2-stage motor as well as spindle right - left rotation.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50
used
bore capacity in steel (diameter): 40 mmthroat: 315 mmbore stroke: 200 mmtaper MK: 4 speeds: 12: 56-1120 U/minbore capacity in cast iron: 50 mmtable-size: 700 x 450 mmDistance spindle/table max.: 710 mmtotal power requirement: 4/3,43 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,14 x 0,7 x 2,58 mElectric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mmHeavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.