We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 202)
used
Technical details: - Mortise depth: 150 mm - Max. slit length: 220 mm - Max. chain width: 40 mm - Longitudinal table movement: 160 mm - Table transverse movement: 90 mm - Inclination: 5° - with 1 x chain (mounted) - with sheet steel stand - with oil lubrication device - with quick adjustment - with instruction manual Engine data: - Three-phase motor, consumption: 2.2 kW - Power, output: 1.5 kW - Voltage: 220/380 V - Current: 6/3.5 A - Frequency: 50 Hz - Speed: 2,800 rpm Dimensions (LxWxH): Transport dimensions: Machine weight: 72 kg Weight of sheet steel stand: 35 kg The machine has been completely cleaned, overhauled and checked for correct functioning. It is supplied with a mounted connection cable with a 16A three-phase plug. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we wo ...
used
Number of milling agregates: 3 St.: 300 x 120 mmweight of the machine ca.: 140 kgMotor output: 1,5 kWSpeed: 12000 U/min.stroke: 120 mmclamping range: 190 x 160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and erro ...
used
x-travel: 900 mmy-travel: 630 mmz-travel: 500 mmtable-size: 1200 x 600 mmspindle taper ISO: 40 turning speed range: 20 - 6300 U/minfeeds longditudinal/cross/vertical: 2 - 4000 mm/minrapid motion -longitudinal/cross/vertical: 10/10/8 m/minnumbers of positions in the tool changer: 22 quill stroke: 100 mmtotal power requirement: 20 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: 4 x 3 x 2,4 melectronic hand wheel: cooling equipment: Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.in condition from seller!33.01 392with CEE plug and cable3-D trace control Heidenhain TNC 42522 fold toll changercolour graphicsvertical head with hydraulic tool clampingfix tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 900 mm, 2600 mm, 80 mm
Model Author 503, 3 axis machine, x = 900 y = 2600 Z = 80, with groove saw, 1 x milling, T dowel drilling 18 + 3 on the front side, 2 + 2 from the back and front 1 x, year of manufacture 95
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Chain stemmer. Stülpfräe Handle / door lock cutter
used
x-travel: 10000 mmy-travel: 1100 mmz-travel: 1700 mmControl: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mmchip conveyor: universal head: table height over floor: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
With milling stop, fine stop, left/right run, 4000-7000 rpm
used
x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Moulded part radius milling machine with saw edge protrusion
used
x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Router model OF 950 year 90
used
x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg
used
Table dimensions: . mmMotor output: 9 kWSpindle diameter: . mmreus: U/minWeight: kgYear: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Double spindle cutter, speeds 3000/4000/6000/8000/10000 rpm , Spindle stroke: 150 mm, spindle diameter 30 mm. Two pcs. Once of it with a feed. In the sales order.
used
x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Wall chain stemmer Head swivelling up to 45C, 380 V, 1.7 KW, with accessories. Div. Chains. Swords: 12x14 17x50x175 1 pcs. 12x17 50x175 2 pcs. 9x11 40x150 2 pcs. 12x17 20x75 1 pcs.
used
module: Diameter: mmboring diameter: mmSprocket cutterDIN3968 Parting 65RO36 R1 EK 20°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
used
Table dimensions: 680 x 1.000 mmMotor output: 4 kWSpindle diameter: 30 mmreus: 3.000/4.500/6.000/8.000 U/min: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm
used
Table dimensions: 2.400 x 800 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9000 U/minWeight: 900 kgtable height: 850 mmheight adjustment: 150 mmtool taper: MK 5 : 270 mm: elektrisch : elektrisch swivellable: -5 bis +45 °: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...
used
Table dimensions: 2.000 x 880 mmMotor output: 4,7 / 5,7 kWSpindle diameter: 30 mmreus: 3/4,5/6/9/12.000 U/minWeight: ca. 675 kgswivelling range: 45 Grad: Ja : Ja tool taper: MK5 height adjustment: 125 mm mmDust suction hood: 125/100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg
used
Table dimensions: 800 x 1.180 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9.000 U/minheight adjustment: 150 mm: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.