Type DP 4000 Special facing lathe which has been converted to Siemens CNC for making internal conical threads Chuckdiameter: 3700 mm Siemens 840D Thread inserts are included, these are used to test if the thread has been correctly turned on the workpiece.  ...

• more information

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into oper ...

Center width: 3000 mm Rotation diameter: 1800 mm above bed / 2800 mm above floor Workpiece weight: 8,000 kg max. Jaw chuck: Ø 1800 mm Speed range: 1.8 - 180 rpm. Spindle passage: 220 mm 3-Axis Digital Readout: Easson ES-14 Equipped with: - Motorized tailstock - Various tooling -Operating instructions Country of origin: Germany Engine power: 34 kW Machine weight: 21.000 kg

turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After ...

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 1,4-74 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 6400 mm Center distance: 18000 mm Spindle bore: 220 mm Numbers of bed guide ways: 0 Weight between centres maximum: 80000 kg MACH-id   4069 MAKE       Zerbst Germany TYPE         DXP 5 YEAR         1987 SPECIFICATIONS Swing in the gap Ø   6400 mm Distance between centres    18.000 mm Work piece weight      80.000 kg Spindle bore    220 mm Spindle speeds / ranges    22,4 Rpm Power    70 Kw DIMENSIONS Length    25.000 mm Width     15.000 mm Height    10.000 mm

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/min Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3200 mm turning diameter over slide rest: 2400 mm turning length: 15000 mm faceplate diameter: 2600 mm control: Siemens 840 Dsl workpiece weight max.: 80000 kg accuracy +/-: bis/up to: 0,01 mm spindle motor: 110 kW faceplate speeds from - to: 0-50 U/min total power requirement: - kW weight of the machine ca.: 60 t overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests - hydraulic tailstock Machine is dismantled and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mm turning diameter over slide: 3.000 mm turning diameter over slide: 2.440 mm turning length: 15.000 mm Control: Sinumerik 840 D SL turning speeds: 50 U/min workpiece weight max.: 80.000 kg turning diameter: orig. 3500 / mod. 2400 mm accuracy +/-: 0,01 ° total power requirement: 110 kW weight of the machine ca.: 154,4 t dimensions of the machine ca.: 20,7 x 6,0 m - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrica ...

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg ...

• more information