weishaupt 9 used for sale

Weishaupt Monarch WM-G10/2-A ZM Burner Scope Weishaupt gas and dual-fuel burners WM10 are suitable for intermittent operation and continuous operation on: • Heat generators according to EN 303 • Hot water systems • Hot water systems •Boiler • Hot air generators • Certain process plants Weishaupt oil, gas and dual-fuel burners of the WM10 series are equipped with electronic interconnection and digital combustion management as standard. Modern combustion technologies in particular require precise and always reproducible dosing of fuel and combustion air. This is the only way to ensure optimum combustion values over a long period of time. Key Benefits • The digital combustion management makes the handling of the burner comfortable and safe. • No additional burner control is required, as the control is taken over by the combustion manager. • Less time i ...

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -

- Weishaupt monobloc two-gas burner - Burner type: WM-G50/1-A - Suitable for the combustion of natural gas and biogas - Year of construction: 2016 - Power: 800 - 8000 KW

Dampfkessel Baujahr: 1986 Neuer Kessel Baujahr 1991 Hersteller: Loos Typ UL SH 14000 Kesselleitung: 8.5 to Dampf/h 6`000kW Betriebsdruck: 16 bar Dichtekontrolle 70 mbar Gas min. 85 mbar Gas max. 170 mbar Neue Steuerung Baujahr 2002 Neue Steuerung Simatic WinCC V5.1 Steuerung HME = Steuerung Alfa / Speisewasser von Enthärtungsanlage Christ (Niveau 11.01 < min Alfa aktiviert Pumpe 11.7 und Ventil 11.71) Steam boiler Year of construction: 1986 New boiler Year of construction: 1991 Manufacturer: Loos Type UL SH 14000 Boiler capacity: 8.5 to steam/h 6`000kW Operating pressure: 16 bar Density control 70 mbar Gas min. 85 mbar Gas max. 170 mbar New control system year of construction 2002 New control Simatic WinCC V5.1 Control HME = control Alfa / feed water from Christ softener (level 11.01 < min Alfa activated) Pump 11.7 and valve 11.71) Die fast neue Wasseraufbereitungs ...

total power requirement:0,2 kW weight of the machine ca.:30 kg dimensions of the machine ca.:0,4 x 0,3 x 0,3 m

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

S/s tank, dimensions: 900 mm x 900 mm x 1800 mm.

S/s transport tank, dimensions: 930 mm x 930 mm x 1600 mm.

S/s transport tank, dimensions: 930 mm x 930 mm x 1600 mm.

Linear actuator, with guide rail FESTO DGP-63-900-PPV-A-B-D2-FK 175138 stroke: 900 mm piston diameter: Ø 6 3 mm Carriage: 230 x 24 mm pmax: 8 bar Guide rail: width: 20 / 18 mm, height: 20 mm 2x carriage: 58 x 48 mm used, tested ! Dimensions: 1380 x 180 x 130 mm

Linear actuator FESTO DGP-32-975-PPV-A-B 161781 stroke: 975 mm piston diameter: Ø 32 mm Carriage: 131 x 19 mm pmax: 8 bar New ! with documents ! Dimensions: 1225 x 54 x 72 mm

Linear actuator, special cylinder FESTO DGO-25-920-PPV-A-B 11917068 stroke: 920 mm piston diameter: Ø 25 mm rod diameter: Ø 26,5 mm rod thread: 2x M22 x 1.5, length: 15 mm slide: 15 x 50 x 50 mm pmax: 7 bar used, tested ! Dimensions: 1160 x 50 x 50 mm

linear actuator FESTO DGP-25-950-PPV-A-B 161780 stroke: 950 mm piston diameter: Ø 25 mm Slide: 105 x 19 mm pmax: 8 bar used, tested ! Dimensions: 1220 x 70 x 70 mm

Feet separator, dimensions: 900 mm x 1150 mm x 900 mm.

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

The Straw Applicator TSA Tubex 9001 is one of the save application solutions. Heavy structure and a speed up to 7500 units/h are ideal for the use with a TBA 19 Filler. The speed can be set variously.

Battenfeld Unilog Control 9000 B

- CNC Steuerung mit bedienfreundlicher Touchscreen Bedienung - max. Arbeitsbreite 900 mm - min./max. Werkstückstärke 5 - 35 mm - Motor Frässpindel 1,1 kW - Drehzahl 17.400 U/Min. - X-Achse Servomotor 0,75 kW - Y-Achse Servomotor 0,75 kW - Gesamtleistung 3,1 kW - Spannung 400 V, 50 Hz - 2 vertikale pneumatische Werkstückspanner - Gleitmittelpumpe - CE Konformität - Betriebsdruck 6 bar - Abmessungen L=1600, B=900, H=1500 mm - Gewicht 650 kg

Technische Daten: - Arbeitbreite min./max. 200 / 930 mm - Schnittöhe min./max. 5 / 30 mm - min. Werkstücklänge 550 mm - Spindeldruchmesser 74 mm - Drehzahl Sägewelle 2600 U/min. - Sägeblatt Durchmesser 205 mm - max.30 Sägeblätter auf Sägewelle - Motorleistung 22,0 kW - Spannung 400 V / 50 Hz - Motor Vorschub 1,5 kW - Gesamtanschluss 23,5 kW - Vorschubgeschwindigkeit 0-12 m/min. - Vorschubrollen 6 Paar (12 Stück) - Absaugstutzen 150 mm - Abmessungen L=2200, B=1500, H=1250 mm - Gewicht 1500 kg

- max. Schnitthöhe 90C 195 mm - max. Schnitthöhe 45C 115 mm - max. Schnittbreite 20 x 850 mm - max. Schnittbreite 200 x 680 mm - Sägeblattdurchmesser 550 mm - Motor 5,5 kW / 400 V - Motordrehzahl 2800 U/min. - Arbeitstisch 1290 x 2000 mm - Motorbremse - Absaughaube - Rückzugfeder - CE Konformität - Abmessungen L=2000, B=1000, H=1300 mm - Gewicht 269 kg

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins

Siemens PLC CPU rack 115U 943B 6ES5 943-7UB11 Power supply 6Es5 951-7LB21 CPU 115U 943B 6ES5 943-7UB11 CP 523 COMMUNICATION PROCESSOR 6ES5 523-3UA11

SAVIO MATEC HF SUPER 4.9VM 4 240 NEEDLES, machine for the production of patterned and plain cotton tights. Large design possibilities. 4 cylinder, 240 needles. For sale - 10 machines. The price is for one piece. Machines in perfect condition, practically unused.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 271 mm -Stroke: measured 945 mm, according to the nameplate 926 mm -Total length retracted center center hole: 1695 mm -Piston rod holder: Ø 100 mm -Admission cylinder: Ø 100 x 70 mm -universally applicable: -Number: 4 pieces available -Price: per piece -Dimensions: 1950/271/H371 mm -Weight: 448 kg

Electric motor, three-phase motor -Manufacturer: Normacem TODAY 125 ar6 -Power: 2.6 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Dimensions: 420/275/H330 mm -Weight: 49 kg

Electric motor, three-phase motor -Power: 0.63/0.9 kW -Speed: 950/1425 rpm -Shaft: Ø 24 x 50 mm -Construction: B3/B5 -Protection class: IP55 -Dimensions: 325/170/H230 mm -Weight: 15.7 kg

Industrial veneer splicer from the renowned German manufacturer Kuper, model FW/J 920. Technical data : speed of movement: 15 m/min total motor power: 0.45 KW, 400 V, 3 Ph, 50 Hz machine dimensions: 1350 x 580 x 1600 mm machine weight: 185 kg compressed air consumption: 10 L/min working width on the right side: 920 mm veneer thickness: 0.4 - 2 mm The machine is in TOP condition, everything is functional. The year of production is 1999. It was purchased as a used machine in 2017 at the Scachermayer Linz sales center, where it was thoroughly inspected and restored. As part of the service, a new heater and consumable parts were installed, and it was delivered with a Scachermayer warranty. The machine works flawlessly and can be tested in operation. Original technical documentation with the machine. The machine is mounted on high-quality industrial wheels and can be ...

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork company Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg

Description: Complete with documents z-motion: 420 mm, x-motion: 600 mm, y-motion: 400 mm, control: HEIDENHAIN TCT 410, taper: ISO 40, weight approx.: 2,900 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 3,000 x 2,000 mm

We can offer: Bundeling machine for packs of bags. Producer : Algewa/Switzerland Type: 965 AS Still in operation: No Available: Now

Shelving platform approx. 900 m2 1 staircase 1 transfer point Price: in case of self-degradation in the condition as the plant is located at the moment without blocks and shelves. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exch ...

Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.

Tube-type screw conveyor with 270 mm diameter and 2.900 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 130 mm.

Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...

27 lfm pallet rack shepherd PR600 New and used goods, top condition see pictures. Height 4.7 m Depth 105 cm Beam length 3.3 m Load/compartment 3000 kg Field load 9000 kg Frame galvanized Carrier blue Negotiation price: € 1,750,-- net from stock Offer consists of: + 9 pcs. frame pre-assembled, depth 105 cm, height 4.7 m, new product + 32 pcs. carrier, length 3.3 m, 3000 kg load/compartment + 64 pcs. Suspension fuses + 18 pcs. concrete anchors + Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are l ...

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

Injection Pump Diesel Pump Stanadyne A3 DB4429-6101 JCB 320/0674 Condition: unused, there may be traces of storage Voltage: 14V Current: 95A Manufacturer: Mahle Part Number: 11 204 215 JCB Number: 320 08719 Reference: 11.204.467 , IA1484, AAK5840 , MG23, 11.204.893, AAK5881, 11.204.215, AAK5820, 11204467, 11204893, 11204215, 320/08648, 320/08649, 320/08719, 12786, 32008648, 32008649, 32008719, 705516095, 4400cc JCB 444TA1 Engine JCB Agrar Agri Tractor, 524-50, 526-56, 527-55, 531-70, 535-95-AGRI 536-60, 2CX 3CX/PLUS/CLL 4CN 4CX 225T 444, G66 QX 526-56 527-58 926 2WD/4WD 930 940 TCA74, 225 226 T 260 EcoMAX TCAE-55; T4F; 55kW, Tier 3 4 320T 325 T 330 TN 220 Agri TM 180, VM 535-95 540-140 540-200 VM115PD/HD/HPD, VM137 VTM860 527-55-WM Excavator Loader Tractor, 416HT 416S-AGRI PL1105 448 PL185 PL195 PT1120 PT18,

Takisawa EX-110 Cnc lathe Working hour : 8949(November 2023) 10 inch chuck Fanuc control unit Machine is in very good condition

Ajan PP 130 A CNC Plasma Cutting Machine Cutting area : 2000 mm x 6000 mm 130 Amper Working hour : 982

By Pass vertical air tank (accumulator) of 900 liters and 11 bar pressure brand CORDIVARI Air accumulator CORDIVARI By Pass 900 liters, 11 Bar