WEILER used machine for sale

Article number: 04-03-226 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1994 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Article number: 04-03-220 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert  Bed stop  Work Light New  Coolant Device New  Complete documentation  N ...

Article number: 04-03-118 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1987 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  Bed stop  Work light  Coolant Device New ...

Article number: 04-03-147 Manufacturer: Weiler Very good general condition Machine geometrically overhauled Delivery time: on request - subject to prior sale Year of construction: as good as new L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 3.8kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: metric 0.30-10mm inches 80 – 2 3/4 gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release ...

Article number: 04-03-165 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø475mm Max. turning diameter via support: approx. Ø270mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 13-2000 rpm Spindle nose: A 2-6 Drive power: approx. 7.5kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.014-1.00 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 ins ...

Article number: 04-03-218 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Article number: 04-03-224 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1987 L x W x H: approx. 1500x1000x1700mm Weight: approx. 600kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø280mm Max. turning diameter via support: approx. Ø160mm Max.turning length: approx. 500mm Rod passage: approx. Ø36mm Spindle: Speed range: approx. 15-3550 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.05-0.80mm/rev Suitable for threads: metric 0.20 – 12 mm inches 80 – 2 gg/" Diametrical – Pitch Thread 160 – 6 Dp Module 0.1 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert   ...

Article number: 04-03-117 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Article number: 04-03-141 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1986 L x W x H: approx. 2000x1000x1700mm Weight: approx. 900kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø340mm Max. turning diameter via support: approx. Ø185mm Max.turning length: approx. 800mm Rod passage: approx. Ø42mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.016-0.50mm/rev Suitable for threads: metric 0.18 – 28 mm inches 80 – 1 gg/" Diametrical – Pitch Thread 200 – 2 3/4 Dp Module 0.1 – 9 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size ...

Article number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Key data: 330 mm, 750 mm

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 Kg, under power

Key data: 330 mm, 750 mm, 160 mm

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 Kg, under power

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Key data: 250 mm, 1000 mm, 380 mm

Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...

max. turning length: approx. 750 mm, spindle bore 40 mm, max. 1800 rpm, with Multifix quick-release system, coolant device and 3-axis digital display, Fabr. ELESTA

Article code: 14-15-006 Manufacturer: Weiler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1200x700x1400mm Weight: approx. 200kg Speed range: approx. 110-3600 rpm Level 1: 110 / 150 / 200 / 270 / 360 / 500 / 650 & 900 rpm Level 2: 440 / 600 / 800 / 1080 / 1440 / 2000 / 2600 & 3600 rpm Center height: approx. 130mm Working height: approx. 1100mm Rod passage: approx. Ø30mm Bed length: approx. 700mm Accessories  4 – jaws – chuck Ø 105 mm Other accessories on request Price and other technical data on request

Article number: 27-06-005 Manufacturer: Trichter Weiler Mint condition Shipping time: All rights reserved. Year of construction: NEW L x W x H: ca.220x200x145mm Weight: approx. 1kg Suitable for: Hamlet Commodor Accessories  Mounting holes  Oil wiper plate Other accessories on request Price and other technical data on request

Article number: 27-06-004 Manufacturer: Weiler Mint condition Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 100x50x50mm Weight: approx. 1kg

Technische Daten Technical Data Turning Diameter 140/260 mm Centre Distance 400 mm Speed Spindle / Spindle Speed 125-2800 rpm If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Machine Type: Mechanic Lathe Manufacturer: WEILER Model: MD 260 Condition: very good Offer Type: Used Machine Specifications: Center height: 132 mm Center width: 500 mm Spindle bore: 31 mm Speed range: 110 – 3600 rpm. Propulsion: 0.37 / 0.9 kW Remark: Thread tensioning device with three inserts 2 / 2.5 / 3 mm pitch, Quick-release collet device with 25 collets 1.0 – 25 mm plus 5 external collets 15 – 70 mm, Three-jaw chuck Ø 140 mm with Alternating jaws and soft jaws, Multifix Gr. A quick-change steel bracket with 3 inserts, rotating grain tip, Chuck coolant device, woodturning equipment, drive flange, 3 machine feet, swivel milling support, and so on. Weight: 400 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifica ...

Key data: 1500 mm, 3000 mm

Control: CNC Weiler (based on Siemens Sinumerik 840 D) Turning length: 3,000 mm Turning diameter: 1500 mm Spindle bore: 165 mm Sledge travel: 790 mm Upper slide: 250 mm Spindle speed: 1 – 1120 /2 steps Tailstock quill mount: MK 6 Tailstock adjustment: 3,000 mm Swivelling C-axis, chip conveyor, clamping cylinder with clamping hydraulics, extraction system, machine platform

Key data: 160 mm

Year of construction: 2003 Top height: 160mm Center width: 650mm Spindle bore: Ø 40mm Circulation over bed 320 mm Spindle speed: 20-2500 Tailstock mount: MK3 Quill Stroke: 85mm Quill diameter 40 mm Longitudinal carriage feed range: 0.020 - 0.630 mm/rev Feed range face slide: 0.006 - 0.200mm/rev Possible thread types: Metric, Inch, Modulus, Diametrical Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Main motor 3.5 kW Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 710kg Accessories as shown in the pictures: 3-axis digital display, coolant device, chuck protection, 4-jaw chuck, punch pliers and other collet equipment incl. Collets, Multifix with 2 inserts, manuals.

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 63 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 5 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 - 0.800 mm/rev Weight, approx.: 1500 mm Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Bed stop - Rotating grain tip - Coolant device - Emergency stop push button - Machine light

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Machine light - Coolant device - Machine feet

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feed rate: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch faces - Emergency stop push button - Bed stop - Machine light - Coolant device - Machine feet

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet

HAMLET PRIMUS VC -CE - Identifier -Year of construction 2001 -Tip height 140mm -Center size 500mm -Circulation over bed 280mm -Circulation via face carriage 135mm -Speed range /infinitely variable 30 - 4000rpm -Spindle passage 40mm -Spindle head DIN 55027 - Size 5 -Rated power 4KW -Automatic longitudinal / plan feeds -Three-jaw chuck 140mm -Multifix - Ground Holder -Work light -Coolant device -Chip protection wall -Stainless steel oil pan -Machine feet -Documentation Dimensions: LxWxH 1,5x1x1600mm / Weight 850Kg

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg