Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...

Turret lathe make WEILER type RDU 260/38Fabr. -No: 12304/442 Year 1971Center height 125 mmSpindle bore 38 mmTurning diameter over bed 260 mmmax. tip distance 500 mmBed length 1020 mm16 spindle speeds 125 - 2800 rpm.Drive power 0.5 / 1.2 hpDimensions L x W x H approx.: 1400 x 700 x 1400 mmWith- built-in electr. Collet chuck- collet set- Parting supportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not  ...

Mechanic lathe Fabr. WEILER Type MDU 260 pGFabr.Nr. 4420, built in 1957for chip removal with manual feed, easier for one-off productionTurned parts in the pliers, in the lining or between the tipsCenter height: 125 mmTip width: 500 mmTurning diameter over support: 140 mmSpindle bore: 28 mmMax. Zangendurchlaß: 22 mmMax. Pliers bore, not continuous: 25 mmFeed travel cross slide: 100 mmFeed path for cross slide: 95 mm16 speeds: 110 - 3600 rpm.2-speed motor pole reversible: 750/3000 rpm, 0.45 / 1.0 hpExternal dimensions: 1300 x 550 x 1200 mm highWith:- Collet chuck with 1 collet- Hand lever support for longitudinal pull- motorized suit- High-speed cutterhead- Drum stops- Thread turning deviceus ...

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Machine Type: Mechanic Lathe Manufacturer: WEILER Model: MD 260 Condition: very good Offer Type: Used Machine Specifications: Center height: 132 mm Center width: 500 mm Spindle bore: 31 mm Speed range: 110 – 3600 rpm. Propulsion: 0.37 / 0.9 kW Remark: Thread tensioning device with three inserts 2 / 2.5 / 3 mm pitch, Quick-release collet device with 25 collets 1.0 – 25 mm plus 5 external collets 15 – 70 mm, Three-jaw chuck Ø 140 mm with Alternating jaws and soft jaws, Multifix Gr. A quick-change steel bracket with 3 inserts, rotating grain tip, Chuck coolant device, woodturning equipment, drive flange, 3 machine feet, swivel milling support, and so on. We ...

Description: . Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 250 kg ...

• more information

Swing over bed/ slide: 260/ 140mm, length: 1250mm, width: 550mm, height: 1200mm, weight: 370kg. ...

• more information