Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not  ...

Mechanic lathe Fabr. WEILER Type MDU 260 pGFabr.Nr. 4420, built in 1957for chip removal with manual feed, easier for one-off productionTurned parts in the pliers, in the lining or between the tipsCenter height: 125 mmTip width: 500 mmTurning diameter over support: 140 mmSpindle bore: 28 mmMax. Zangendurchlaß: 22 mmMax. Pliers bore, not continuous: 25 mmFeed travel cross slide: 100 mmFeed path for cross slide: 95 mm16 speeds: 110 - 3600 rpm.2-speed motor pole reversible: 750/3000 rpm, 0.45 / 1.0 hpExternal dimensions: 1300 x 550 x 1200 mm highWith:- Collet chuck with 1 collet- Hand lever support for longitudinal pull- motorized suit- High-speed cutterhead- Drum stops- Thread turning deviceus ...

Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...

Mechanic Lathe Fabr. WEILER Type MDU WMachine -No: 12401 Year 1971Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over slide: 140 mmMax. Tip width: 500 mmSpindle bore: 28 mmSpindle speeds: 160-1800 rpm.Drive power: 1.1-1.2 kWWeight: 400 kgOutside dimensions: 1300 x 600 x 1200 mmWith- Cranksupport- Collet device with draw tube and colletsused, from operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

Turret lathe make WEILER type RDU 260/38Fabr. -No: 12304/442 Year 1971Center height 125 mmSpindle bore 38 mmTurning diameter over bed 260 mmmax. tip distance 500 mmBed length 1020 mm16 spindle speeds 125 - 2800 rpm.Drive power 0.5 / 1.2 hpDimensions L x W x H approx.: 1400 x 700 x 1400 mmWith- built-in electr. Collet chuck- collet set- Parting supportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m.  ...

Production lathe Fabr. WEILER type MF 220Top height: 100 mmTurning diameter over bed: 220 mmTurning diameter over cross slide: 120 mmTip width: 450 mmSpindle bore: 23 mm12 spindle speeds: 125 - 2800 rpmExternal dimensions length x width x height: 1080 x 450 x 1180 mmWeight approx: 225 kgWith- ColletsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Parallel Lathe WEILER PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with 1 4-jaws chuck Ø 155 mm 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION