wedalco used for sale

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

Pneumatic punch Fabr. WEDI Type V II aMachine -No: V2502 Year 1982Table size: 210 x 210 mmInstallation height: 140 mmOutside dimensions approx: 500 x 600 x 1250 mmWith- 6 profile punching tools- Footswitchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used thickening centrifuge Performance speed: 1600 rpm Drum diameter: 1114 mm Weight: 18,500 kg Rotodiff: Viscotherm 112 S full hydraulic Second-hand machine Not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Drum diameter: 909 mm Drum material: G. 7382 Weight: 12,200 kg semi mobile (with base). not ready for operation (major overhaul extra charge!)

Submersible pump

Used centrifuge Drive: 30 kW Hydraulic: Viscotherm VFD11 11.5Z Speed power: 3200 RPM Drum diameter: 530 mm Weight: approx. 6000 kg Accessories: as good as new, complete switching and control system, mud - and polymer pump, discharge screw, MID mud and polymer Second-hand machine, Semi-mobile (with base) ready for use

Used centrifuge (with base) Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: ST52-3N Weight: 5600 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Drum diameter: 900 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg Maximum operating temperature: 50°C Maximum operating pressure: 1 bar not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 11,500 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 14.000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge on mobile trailers 200 kW full hydraulic Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg ready to use,. Includes: Panel, polymer conditioning

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)

Used centrifuge (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 14.000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1120 mm Drum wall thickness: 23 mm Drum material: 1.7382 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 22,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Drive motor: 11 kW Type hydraulic: Replacement C11 - 40Z Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: 1.4571 Max. Density: 1.5 kg / dm³ Weight: 7200 kg completely overhauled, Stainless steel, ready for use

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use

Used centrifuge Semimobil (with base) Hydraulic: B/C 55-180 KE Speed performance: 1130/RPM Drum diameter: 1120 mm Drum wall thickness: 20 mm Drum material: ST52-3N Weight: 17,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Speed performance: 3040 U/min Drum diameter: 552 mm Drum wall thickness: 12 mm Drum material: StE 460 Max. Density: 1.3 kg / dm³ Max. Item material temperature: 10 - 50°C Weight: approx. 5220 kg not ready for operation (major overhaul extra charge!)

Power 35 cbm/h Consisting of: UV Reactor, case stainless steel material 1.4301 Material Reactor Chamber: pure quartz Volume 25.0 l UV spotlights Hg low pressure spectrotherm emitter Power 160 watts

High-performance fine cone crusher Calibrator 1600/300 H III

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: für max. 60 mm Bohrer weight of the machine ca.: 389 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Suitable for automatic grinding of right-cutting, 2-edged twist drills with cylindrical shaft or MK shaft. Accessories: Wet grinding device. Pulling device 5 chucks, 1 grinding wheel holder,, Grinding area: 2.5-20mm, Point angle: 60 - 180°, Tool holder conical: MK1 - MK6, Cylindrical: Chuck 5 - 25 mm, automatic feed: 0.008 - 0.04 mm per tool revolution, Max. Tool length: up to 550mm, Grinding wheel diameter: 203 x 10 x 32 mm, number of revolutions: 2800 rpm, Connected load: approx. 1.25 kW (400 V / 50 Hz), mass: approx. 94 kg, Dimensions W x D x H: 520 x 900 x 1250 mm, colour: green RAL 6011, Grinding wheel (standard): 230 x 50 x 123 mm, speed: 2700 rpm, weight: approx 490 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as seen -Wedge bar chuck: Spare parts carrier, see photos for missing parts -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Intake: short cone 11 -Weight: 64 kg

Interlinking wedge, 5 pieces FESTO LFMV-3/4-1-H 39202368 L1T05B04T8 Contents: 2x wedge, 2x screw M4, x washer, 1x sealing ring New, with documents ! Dimensions ( packaging ): 210 x 130 x 40 mm

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Wedge gate valve, shut-off valve PAGUS DN65 PN16 Clear width: 215 mm Flange Ø 185 mm Handwheel: Ø 150 mm Sealing wedge: brass ! New ! Dimensions: 220 x 190 x 420 mm

Wedge groove machine HURTH LF32a - see pictures

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg

3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used

Measuring wedge PROMETEC 011.033.1.DKMIG approx. 2.0 m Connection cable with plug ! New ! Dimensions ( without cable ): 46 x 20 x 12 mm Dimensions ( packaging ): 110 x 110 x 30 mm

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 200 mm -interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Hole circle: 172 mm -Weight: 90 kg

Wedge gate valve, shut-off valve MAW DN80 PN10 GG-25 DIN3352 flange Ø 200 mm Sealing surfaces: stainless steel ! New ! without handwheel ! Dimensions: 200 x 180 x 415 mm

Magnetic coupling, multi-plate coupling FONAR OSTRZESZOW ? TM-104-1H ( ETM-104-1H ) Shaft diameter: Ø 40 / 36 mm, spline profile, 8 wedges Wavelength: 55 mm Number of clutch plates: 5 Control voltage: 24 V DC New ! Dimensions: Ø 120 x 55 mm

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 330 mm -Interchangeable jaws: 1 set -Bayonet short cone flange: cone size 8, cone Ø 139.7 mm, bolt circle Ø 171.4 mm -Throughout: Ø 90 mm -Weight: 76 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Number: 3x feed available -Price: per piece -Weight: 60 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 216 mm -Recess recording: mm -Pitch circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 290 mm -recess recess: Ø 268 mm -Hole circle: Ø 168 mm -Through hole: Ø 70 mm -Weight: 43.5 kg