wean united used for sale

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM

Tractor drive from 50KW, optionally with continuous or Variogetriebe, ca 500 PCs around the world,... Perfect compost quality in economic operation, over 20 years experience! For green waste, organic waste, contaminated soil, sewage sludge utilization, drying of biomass...

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Origin: United States M. Nr: 71080

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

Roller aisle with 180 weaning, hydraulic weed drive, electric drive 0.5 kW, length 2,200 mm, roll width 550 mm, base on Foerderhoehe 900 mm Roller conveyor with 180 hydraulic driven turning device, motor 0.5 kW, length 2,200 mm, width 550 mm, transportation high 900 mm

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 900mm Total width: 1030 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of straps: 4 PCs. <b>Tailor-made solutions for your intralogistics</b> We are ...

POS 1 Dry pigment titanium white rutile R660 Sachtleben stored dry in 25 kg bags. Ideal for artist colours and paint for transport cost reasons, if possible min 100 kg Small delivery quantities may be after consultation Total quantity available: 625 Kg Pucsvm Other dry pigments: Zinc White / 625 Kg Zinc White by ZnO EPM Manufacturer:Umicore Nederland B.V. Ocre jauen 2022 ( yellow ochre N°2022 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombe naturelle 1066 ( Umbra natur N°1066 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombre naturelle 1380 ( Umbra natural dark N°1380 ) 500 Kg Manufacturer Le Moulin - Couleurs France Umbra calcine 4 x 25 Kg = 100 KG Umbre calcine E 1102 Manufacturer Le Moulin - Couleurs France Chalk Chalk / North White United Chalk Works Dammann KG

Constant Manufacturer Varta suitable for regeneration of individual battery cells or as a DC source with very constant direct current without stoer influences, e.g. in research at the university. Weight approx. 120 kg Also particularly united as a power supply in laser research. Tags Current stabilization with a more aeusser current resistance Master Slave Voltage adjustment due to aeusser resistance Voltage adjustment due to aeusser voltage Nhowzm38 More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor Number: 4 PCs. 2 STK. with partial engine 2 PCs with engine under the conveyor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 720mm Total width: 1040 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of belts: 2 P ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

DAMET MP 15 - 18 Pneumatic Hand Staplers / Carton Staplers / Box Staplers are hereby offered for sale. Each item works flawlessly and has been regularly serviced. -Booklet Type: 35/15; 35/18 -Magazine capacity: 100pcs. -Operating pressure: 5 - 7 bar -Power: 2 connections/sec. -Air pressure: 0.067 m3/min -Drive: manual -Weight: 1.59kg - Dimensions (L x W x H): 300 x 100 x 200mm Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to pr ...

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...

Axle set with hydraulic motors Rexroth MNR R921811314 Hydraulic radial piston motor Rexroth 2 pcs Model Rexroth MNR: R921811314 CNR:- TYP: MCR5F470F180Z32B4M2WL 12SP SN: 1938362 FD: 12W40 7481 Made in the United Kingdom Shipping weight - 221 kg

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

Bottle unscrambler Manufacturer Groninger Located in United Kingdom

SIEMENS SINAMICS PM240-2 Manufacturer Part Number: 1P 6SLL3210-1PE16-1UL1 Serial Number: S XAN416-022580 Shipping (optional) Weight: 1.4 kg Country of Origin: United Kingdom The item is available for immediate delivery. The Siemens SINAMICS PM240-2 is a series of inverters (frequency converters) designed for industrial applications. These inverters are used to control the speed and torque of electric motors in various industrial processes. The inverter allows adjusting the motors performance to the specific requirements of an application. If you have specific questions about this product or need assistance with installation and configuration, you can also contact Siemens directly or reach out to an authorized Siemens dealer. There, you will receive professional assistance and accurate information tailored to your specific product. The data for this ad was created with ModulMWS - the so ...

This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...

HAAS VF-1 CNC vertical machining center built in 2014 in the United States is distinguished by its excellent milling precision and accuracy, making it able to stand up to even the most intensive production requirements. This highly efficient and reliable machine features a robust, steel design with compact dimensions that effectively dampens any vibrations and ensures maximum stability of the machining process. Behind the sliding door, there is a large work area with a T-slot table, a 20-position tool magazine and a powerful spindle. All tools taken from the magazine are continuously measured by a measuring probe to prevent damage or tool breakage. The HAAS VF1 vertical milling center is also equipped with an intuitive HAAS CNC control that allows the creation of machining programmes in just a few steps. The VF-1 CNC machining center weighs 3539 kg. Technical specifications of the  ...

Unscrambler Manufacturer Groninger Model ZSB 1200 Year 2003 Located in United Kingdom

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

Manufacturer | manufacturer: Bekum Machine Type | machine type: BM 504 Stations | stations: Single Station | Single station Year of construction | Built: 1998 Location | location: United Kingdom | Germany Clamping force | Clamping force: 110 kN Control Type | control system: Beckhoff Extruder | Extruder: S60/24D Extrusion Head | Extrusion Head: Single Head | Single head Mold dimensions mm | mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 470 / 420 / 2x130 Bottle Volume Max. | bottle volume max.: max. 12 L Screen Language | monitor language: German / English | German / English Operating hours | working hours: approx. 3000 Accessories | accesories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks

Unscramble Manufacturer Swiftpack Model CEH110 Year 2001 Located in United Kingdom

10 head filling machine Manufacturer King Year 2012 Located in United Kingdom

Tamper Evident Labeller Manufacturer Pals Model FL 70 Year 2005 Located in United Kingdom

Labeller front back and wrap Manufacturer Pago Model system 100 Year 2001 Located in United Kingdom

Microfluidizer Manufacturer Microfluids Model M 210 ER Mill Located in United Kingdom

Manufacturer Alfa Laval Model: PAZ 630C Year of manufacture: 1974 Located in United Kingdom

Cartoner Manufacturer Klockner Model P120 Located in United Kingdom with Guk leaflet folder

Cartoner with bottle infeed and spoon fedder Manufacturer CAM Model HS Located in United Kingdom

CAM blister carton machine guk leaflet feeder two blister feeders Located in United Kingdom

Manufacturer: Romarco Model: Promatic P150 for blister Located in United Kingdom

This Mazak SQT-200 Lathe was manufactured in the year 1997 in the United of Kingdom. It is equipped with a Mazatrol T PLUS control unit. The machine has a Lathe chuck kitagawa 8” + 10” and disposes of a Mayfran chip conveyor.

We hereby offer this exceptional used Bridgeport VMC 1000 XP vertical machining center from 2002, located in Poland. This vertical machining center offers superior performance, featuring a spacious working area measuring 1150 x 580 mm, a high-speed 8000 rpm spindle, and a robust 13 kW motor. The Bridgeport VMC 1000 XP is your ultimate solution for high-precision machining and top-tier manufacturing. Technical specifications: Year: 2002 Made in: United Kingdom Control unit: Heidenhain i530 X-Axis travel: 1020 mm Y-Axis travel: 610 mm Z-Axis travel: 600 mm Table length: 1150 mm Table width: 580 mm Table load: 300 kg Spindle speed: 8000 rpm Motor power: 13 kW Spindle taper: BT40 Tool magazine: 30 positions Dimensions: Length: 4200 mm Width: 2800 mm Height: 2800 mm Weight: 4400 kg Features: -Drives: Siemens -Pilot control (rod) -Double guides on the Y axis I ...

2 doughnut bakers with two weaning trolleys. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.

This HAAS ST 40 Lathe was manufactured in the year 2014 in the United States. It is equipped with a HAAS control unit. The machine disposes of a main spindle , a chip conveyor and a tailstock.

This Lathes COLCHESTER Bantam 2000 was built in 1988 in United Kingdom.

This HAAS DS-30SSY Lathe was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 4800 rpm.