We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..
Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.
Universal radial drilling machine make VOEST type AB 32Year of construction 1976Max. Drilling capacity ST: 50:32 mmMax. Drilling capacity: GG 20:40 mmDrilling ST / GG: 50/60 mmDrilling depth: 180 mmSpindle mount: MK 4Height adjustment of the boom: 610 mmProjection of the jib: 1000 mmTable surface: 1120 x 800 mm8 spindle speeds: 20 -3 000 rpm.3 automatic feeds: 0.05 / 0.1 / 0.2 mm / revDrive power: 1.5 kWWeight with base "940 kgWith- 3 automatic feeds- mot. boom stroke- Swing arm 360 °- Drilling head swiveling + 90 ° to -90 ° in the verticalxa0xa0 all 15 ° indexable, swiveling, adjustable and rotatablexa0xa0 (see brochure)- Cooling deviceused, in good conditionPrice on request.Delivery: e ...
Four - jaws flat disc with individually adjustable clamping jaws. Diameter: 400 mm. High, without jaws: 100 mm, with jaws: 155 mm. Through hole: 90 mm. Chuck flange: DIN 55027, Size: 6 with 4 bolts, 21.5 mm with M 12 nuts and clamping wrench Good cleaned and ready for use condition. Weight: approx. 45 kg. Shipping with forwarding possible. The part was mounted on a VOEST lathe, type: DA 210 - 250. The Planchine can be visited in consultation and is immediately available. Please also note my other entries.
Voest DA180-52-800 - Universal lathe - the machine is completely revamped and as good as new - CE conformity - Sino SDS6-3V 3-axis position indicator - 3-jaw lathe chuck Ø 200 mm - Multifix Type B - Coolant device - Work area lighting Specification - Center width: 800 mm - Center height: 180 mm - Turning diameter over bed: 380 mm - Turning diameter via slide: 200 mm - Quill holder: MK4 - Spindle bore: 52 mm - Bed width: 330 mm - Speed levels: 12 - Speed range: 33 - 1500 rpm - Feed speed: 0.072 - 0.54 mm - Metric threads: 0.5 - 3.625 mm - inch thread: 7 - 46 tpi - Motor power: 3 kW - Voltage: 400V - Dimensions WxHxD: approx. 2100 x 1650 x 1050 mm - Weight: approx. ...
Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.
Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately. ...
Description: Speed: 14 - 1000 rpm Center length: approx. 1000 mm Center height above bed: approx. 200 mm Turning diameter over bed: approx. 400 mm Center height above support: approx. 120 mm Turning diameter above support: approx. 240 mm The machine is equipped with a tailstock, a steel holder and a three-jaw chuck Diameter: 160 mm Spindle clearance: approx. 53 mm weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 950 x 1,600 mm
Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information. ...
Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information. ...