used VIP INDUSTRIAL Autoclaves

Packing machine with bottom foil feeder - 3 servo motors and a printer. Machine Specification: Type: 350X Film width: max. 350mm Package length: 90 - 600 mm Package width: 30 - 160 mm Product height: max. 70mm Foil roll diameter: max. 320mm Packing capacity: 30 - 120 packages/min. Film location: lower film feeder Packing materials: OPP, OPP/CPP, KOP/CPP, ALU-FILM Controls: TOUCH SCREEN touch panel Type of drive: 3 x servo motors Photoelectric sensor: Yes (work with printed foil) Power: 220V, 50/60 Hz, 2.4 KW Machine size: LxWxH - (L)3836 x (W)890 X (H) 1079mm machine weight: 350 kg An advanced high-speed product packaging machine (with bottom foil feeding) is suitable for food products (e.g. chocolates, bread, fingers, sandwiches, vegetables such as celery, dill, greens) and industrial products (e.g. packing masks, sockets / electrical switches, etc.). Packing l ...

Cylindrical and fixed horizontal autoclave, used to sterilize food products. The equipment is totally made in stainless steel AISI-304. Manufacturer: VYC INDUSTRIAL, S.A. Type: AE-7800 Year: 2002 Maximum service pressure: 2 bars Design pressure: 2 bars Bell pressure: 2 bars Hydraulic test pressure: 3 bars Maximum service temperature: 110°C Design temperature: 150°C Elactic limit in design temperature: 140 n/mm2 Volume: 7,8 m3 Contained fluids: water/air 8 baskets in stainless steel and 6 trolleys are included. Cage dimensions: inside 980mmx1000mmx950mm. Outside 1070mm x 1060mm x 975mm. Recently overhauled and in perfect working order.

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

an older and used good cold rolling mill for the production of ribbed structural steel wire

Description Heating platen Ce certificate

X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t.

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

NST#40 spindle with 5HP inverter motor. Spindle material is SCM415 full hardened through carbonizing heat treatment. Essential castings are made of high grade of Meehanite cast iron, which has been stressed, relieved to provide a rigid machine structure. Standard with 10” X 54” table with hardened and ground. Table T-slot is precise ground for precise tolerance. Precise ballscrews are equipped on X&Y axes. X Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface. XYZ slideways are hardened and ground for wear resistance and excellent longevity. 1:2 ratio timing belt pulleys on XY axes to increase drive torque. Table Size 1270 x 305mm T slots of table (number x width) 3 x 15.875mm Longitudinal travel 985mm Cross travel 450mm Vertical travel 450mm Quill travel 127mm Spindle nose to table surface 150~600/67~425mm Head swivel (R&L) 4 ...

B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:

* General * SKU260U416 * LocationBarneveld * MakeMidland industrial * TypeFS 100/102 * No.SI 0055 09 * Year of construction2009 * Main Features * MaterialStainless steel * Motor1.1 KW * Length420 mm * Specified Features - Rotating sieve * Rotating sievecheck * Sieve sizesDia: 160x420mm * Screw sizesDia: 155x670mm * InletDia: 250mm * OutletDia: 120mm, 60mm * Motor1,1kW, 230/400Volt, 920 rpm, (EX) * Speed920rpm * With sieve cagecheck * Sieve perforationDia: 2mm * MaterialStainless steel 1.4401 (316) * Information * Total height0,8m * Weight160kg * CEcheck * Floor space1,1x0,4m * ATEX compatiblecheckRotating sievesMidland industrialSieves > Rotating sievesBrand > Midland industrial What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

The box washer is designed for the semi-automatic washing of kistens and wooden containers, as standard. The use of a washer in the process reduces the consumption of water, detergents and energy. One box is washed at a time,

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. For more details and information; contact us at Infoukpowergeneratorsltd

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.