vertical slotting machine used for sale

Brand : Comi Pack Model : VM40 Year : 2003   Type : Vertical bagging machine Voltage : 380 / 400 Volt Hz Power : 3,7Kw Air consumption : 60 Lt/min Tube diameter : min 40 - max 120 mm Product dimensions : length: min 40 - max 280 mm Width: min 40 - max 180 mm Winding band: max 400 mm Roll diameter : max 400 mm Machine dimensions: L 1700 x W 950 x H 1620 mm 2 formats available

Key data: 350 mm, 450 mm

Electromechanical vertical slotting machine with integrated rotary table and four CNC-controlled axes Largest ram - stroke range 350 mm 0 to 80 strokes per minute infinitely variable Maximum installation height 640 mm Shock head - swivel range +/- 20° Rotary table diameter 450 mm Table - travel - 340 x 340 mm Bore in the round dividing table Ø 130 mm Maximum workpiece weight 1,250 kg Drive power 8 kW Weight approx. 2,600 kg

Urpe M200 vertical slotting machine. Travel: 0-200mm. Table size: 650x220mm. Strokes per minute: 40-55-75. With chuck.

Tos HOV 25 Ø 500 mm Strokelength: 250 mm Table dia: 500 mm Longitudinal travel table X-axes: 560 mm Crosstravel table Y-axes: 450 mm Length : 2270 mm Depth : 1425 mm Weight: 2850 kg

max. ram stroke: . mm throat: . mm table diameter: . mm serial number: 556 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

Slotting machine - vertical / Stanko 7A420M -Plunger stroke 200mm E2n0GMI -Table diameter 500mm -Projection 400mm -Stroke rate 40 - 163 strokes/min -Spacing - Knife / Table320mm -Adjustment of the table 360 degrees / rotary table -Adjustment of the table / longitudinal 500mm -Adjustment of the table / transverse 400mm -Rapid traverse 1.8 m/min -Feed 0.1 - 1.2mm -Total power requirement 4 KW Dimensions: LxWxH 2.3x1.5x2.2 meters / Weight 2.2 to

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Curve planer

HOV 25

Table diameter: 800 mm Y-way: 800 mm X-way: 800 mm Extension: 700 mm Stroke length: 40 - 210 mm Stolin creation: 350 mm Lifting speed: 10 - 56 ppm. Swivel head: 10° left/right Installation height: 500 mm (from table) 3-jaw chuck diameter: 700 mm Engine power: 4.4 kW Country of origin: Germany Transport mass LxWxH: 2700 x 1700 x 2300 mm Machine Weight: 4500 kg

Planing comb to Maag gear planing machine

MAX DIAMETER 750,MAX MODULE 10

MAX DIAMETER 800.MAX MODUL 10 , MAX STROCE 200

Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK   Stanko TYPE    7A420 M YEAR   70 er Stanko 7A420M Steek bank

Stroke: 0 mm Throat: 650 mm Table diameter: 220 mm Make Urpe M 200 G Type M 200 G Year 1988 slotting machine senkrecht stossmaschine schwenkba Stroke = 0 - 200 mm Table = 650 x 220 Head tilting = 0 - 30 Gr.  

Gear slotting 5140, Russia production, with change gears

Coming for sale : Peacock P1200 S , 2002 Under power If interested please contact

2 STATIONS BRONSHING (RAEUMMASCHINE) Year of construction 2001 great condition

Inv. Num. : 6256 Type: ZSTWZ Producer: WMW Created: 1954 Parameters: Maximum gear diameter (outer teeth): 1000 mm Table diameter: 900 mm Machine dimensions: 3000x1200x2300 mm External. internal module M 1 - 8

MAX DIAMETER 250 SINUMERIC 810 C YEAR 1996

MAX DIAMETER 550 MAX MODULE 6

MAX DIAM 550 MAX MODULE 6

MAX DIAMETER 500 MAX STROCE 120 MAX MODUL 5

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

Tool holder for slotting machine PAGUS chisel flap: 140 x 85 mm 2x T-slot: groove width: 16 / 30 mm, groove depth: 21 mm 100 mm height adjustable, +/- 15° swivelling Flange diameter: Ø 230 / 80 mm shaft diameter: Ø 18 mm Wavelength: 48 mm Groove width: 6 mm ring groove: Ø 190 / 150 mm, depth: 23 mm used, tested ! Dimensions: 300 x 270 x 520 mm

Tool holder for slotting machine PAGUS tool holder (rotatable): 50 x 20 mm chisel flap: 125 mm height adjustable, +/- 15° swivelling Flange diameter: Ø 147 / 95 mm guide bolt: Ø 30 / 50 mm, length: 30 / 27 mm used, tested ! Dimensions: 460 x 340 x 155 mm

MAX DIAM 500, MAX MODUL 8 , PLC , DRO

Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D

- Planer length: 375 mm - Planing width: 500 mm - Lifting speed: 19 - 190 mm/stroke - Distance between table + ram: 390 mm - Table size: 350 x 315 mm - Total power: 1.8 / 2.2 kW - Machine weight: 1100 kg - Space requirements (W x D x H): 1.25 x 1.5 x 1.5 m - Condition: good Details good condition, runs very quietly Accessories various cranks

Code: 0010 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Planing machine horizontal slotting machine used; STANKO; Type: 7 D 36; Clamping table size approx. 700 x 450 mm; 380 V; Total approx. 3100 x 1600 x 1800 mm;

- Planer length: 375 mm - Planing width: 500 mm - Lifting speed: 19 - 190 mm/stroke - Distance between table + ram: 390 mm - Table size: 350 x 315 mm - Total power: 1.8 / 2.2 kW - Machine weight: 1100 kg - Space requirements (W x D x H): 1.25 x 1.5 x 1.5 m - Condition: good

Gear shaper Lorenz SJV 00 with change gears and accesories.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95