vakumix ag used for sale

Vakumix continuous homogenizer in the design and mobile on rollers. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 CW: 30 Suction device front side DN25 for sucking in liquids. NEW: Control, inverter, all seals incl. mechanical seal. The flow homogenizer is PLC controlled. Delivery time approx. 4 weeks.

General SKUR1397 LocationBarneveld MakeVakumix AG (DE) TypeHM2-008 with lid-lifting device No.1033070 Mach.No.1033070 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume3.1 Ltr. Motor5.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4404 (316L) Processing vessels Capacity3.1 Ltr Closed stirring vesselcheck Capacity3,1 Ltr (Nett.2,5-2,0 Ltr ) Vessel sizesdia. 150x160mm Dished bottomcheck Dished top sidecheck With covercheck Outletdia. 25mm With jacket(0.44 Ltr) Max. temperature180 degr.C. With anchor stirrercheck Motor0.37 KW, 400 Volt Speed mixing shaft10-410 rpm With homogeniser(500 - 14000 rpm) Motor5.5 KW, 400 Volt Information Year of construction2004 Total height1,9 M Weight300 Kg CEcheck With switchcheck Floorspace1,0x1,0 M Extra Specificationsincl ...

Laboratory mixing and homogenizing plant with 2L usable volume, machine incomplete

Stainless steel tank with agitator, 2,400 l

Container/ tank made of ALU, square, 475 l

Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

orschubaggregate suitable as spare part for COOK + COOK BOLINDERS + MECOUTIL

ID3271 Deutz Agrotron TTV 1160 year/Year of construction 2004 approx. 8800 hours/hours Tractor, front loader Quicke 980, front hydraulics, front PTO Tractor, Front loader Quicke 980, Front hydraulics, Front PTO

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

Material: stainless steel The Flexomix is a vertical continue mix- and agglomerate engine with high capacity and need a minimum of space. The way of working is easy of operation, with a minimum of man power. Very good for the use of ultrafine, light products like washing powder and much more. Very good condition, like new. You can also get the entire system with all components you need.

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

Hydraulic Unit 30 l, 60 l / min, 200 BAR, with tray and solenoid valves, electric motor three-phase 0.75 kW More information at 0170 / 2204056 Mail to fa.raupp@t-online

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

Cat No. 16-00137 in a very good condition Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upper body: · filling connection DN 50 central in the upper bottom, 2 sleeves 3/8”, 1 flange piece NW 25, 1 flange connection NW 80 Tank body: · with ladder hook up · with Manhole oval 450 x 350 mm swiveling · with downwa ...

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

We offer you here a used Boyens release agent spraying system Year of construction: 1999 Type: Airboy 05 In case of interest and for further questions do not hesitate to contact us

2-flügliges mixer - as new- Manufacturer: Ekato Type: DENI 480 S Serial number: 1348091-20 Working pressure: 1 bar Working temperature: 30 ° C Revolutions: 48 RPM Year of construction: 1999 Agitator was never in operation and is still there, as on the first day. Therefore in Very much good condition! New price: about 5.080,00

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Propeller agitator Manufacturer: Stelzer Type: propeller agitator Wave length: 64 cm In very good condition!

Propeller agitator Manufacturer: Stelzer Type: propeller agitator Technical data: Engine power: 11 kW Speed: 1.450 U/min Frequency: 50 Hz Wave length: 60 cm Shaft diameter: approx. 6 cm In very good condition!

Agitators for the fixed installation AFEOL (new)

Agitator 0.37 KW, 400V, 1340 RPM Coupling aluminium Agitator shaft d = 14 mm, L = 500 mm, stainless steel 1.4301 Stirrer stainless steel, with angle-adjustable angle leaves, d = 244 mm, angle blade width 50 mm, stainless steel 1.4301

Used beater 0,12 KW with gear motor Bauer 27 rpm and aluminum propeller stirrer 300 mm = 1350 RPM gear motor: Gearmotor Bauer, 3 x 230/400 v 0.12 kW, n1, n2 = 27 U/min., 24.5 NM, IP 54 weight approx. 8 kg = M2. With brake. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, material 1.4301 stainless steel. With rigid coupling made of aluminium. Stirrer: Double propeller stirrer, diameter 300 mm, material aluminium very slow running, torque mixer for use in attaching containers or kettles. Also can be used to prevent cavities in powder silos (bridging). With traverse for IBC containers or other containers for extra charge. Caution: Not suitable for aggressive media. 3 pieces in stock.

A Jenbacher gas BHKW is sold here. MotorLoeistung: 620 kW Year of construction: 1996 More information will follow... +49(0)1773879144 With kind regards Subscriptions

Offer Used power generation aggregate D 250-4 IWE according to ISO 8523 of Kirsch, BJ 2003, Executive class according to ISO 8528 â 1: Application by 6280-13:2/A4 VDE 0108 Nominal power: PRP 200 kW, nominal voltage: 400 V, nominal current: 361 A, Nominal frequency: 50 Hz, nominal speed 1500 min-1 New price: From â?¬87,130.00 (net) engine: Manufacturer IVEV, No. 594641 Type: GE 82010 Sri 25.01 Power 221, 0 kW, speed: 1500 min-1, cooling system water Generator: Manufacturer Leroy Somer, 1st 150375/1 Power: 315 kVA, voltage 400 V, 3 â 50 Hz Engine hours: 47.57 h Aggregate: Manufacturer: Cherry, No: 4293 Type: D 250-4 IWE The buyer must expertly mine and pick up the plant himself and at his own expense.

Intermix Type: EIÜD 4-C with Bran + Lübbe fine dosing pump 4-component mixer Power: 30,000 ltr./h

Cat No. 17-00156 in a very good condition Agitator TMR Type: SK 9042AF-132 M/4 TF TMR Turbo Misch Typ: SK 9042AF-132 M/4 TF I = 23.23 / H6 N1/n2 = 53 1/min Motordata: Type: SK 132M/4 50 Hz; 400 / 690 V; 14,8 /8,55 A; 7,5 kW ; 1445 1/min Measurements: Height: 2250 mm Width: 450 mm Length: 950 mm Length of the large wing: 540 mm Length of the smaller wing: 350 mm Weight: 600 kg available: 3 The price is for one unit.

Continuous ageing furnace, make VEI-Engineering type: KADL 2 120 x 240 tracks: 2 furnace output: approx. 2.000 kg/h gross heating zones: 2 gas heated, 3 electrically heated max. temperature: 280°C working temperature: 180 - 200°C useable dimensions (l x w x h): 15.250 x 2.530 x 2.200 mm external dimensions (l x w x h): 28.500 x 5.800 x 6.200 mm

Agitator 0,12 KW with gear motor North i 1:20 and Propellerrührer 150 mm = With beam in aluminium profiles 45 45 mm. Gear motor: i 20 = Flender gear motor, 3 x 230/400 v 0.12 kW, n2 = 67 U/min., M2 = 17 nm, weight approx. 10 kg. Shaft: precision stainless steel shaft D16, length 500 mm, diameter 16 mm, material stainless steel Stirrer: three flight liger propeller stirrer, diameter 150 mm, material stainless steel 1.4581

Used agitator 3.0 KW with long stirring shaft 1700 mm With beam in aluminium profiles 45 45 mm. Electric motor: Siemens 3.0 KW, 3 x 230/400 volts, 1420 RPM., IP55. Weight approx. 35 kg. Shaft: precision stainless steel shaft D28, length 1700 mm, diameter 28/30 mm Material stainless steel 1.4301. With 2 rigid couplings stainless steel 1.4301. Stirrer: Prismatic blade, length 300 mm, material 1.4301 stainless steel / polyamide.

Stock# UG6276 Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.

Aggregate screening line. Year of production (installation) - 2004 Installation capacity - 4 t / h Grain size of the screened material 0 - 6mm The line includes: 1. Storage silo - 20 tons 2. Raw material hopper 3. Vertical bucket conveyor PK-250-200 / 9200 - manufacturer WAKRO Sp. Z o.o 4. Vertical bucket conveyor PK-250-200 / 8000 - manufacturer WAKRO Sp. Z o.o 5. PKS-200/4200 screw conveyor - manufacturer WAKRO Sp. Z o.o 6. PKS-200/2800 screw conveyor - manufacturer WAKRO Sp. Z o.o 7. PKS-250/2515 screw conveyor - manufacturer WAKRO Sp. Z o.o 8. PKS-250/5300 screw conveyor - manufacturer WAKRO Sp. Z o.o 9. Ball mill 10. Air filter FPK-23/25 - manufacturer WAKRO Sp.z o.o 11. The PWL2-1 / 2,2-Ew2 linear vibrating screen - producer NOWET Sp.z o.o

Very fast running agitator 0.25 KW - 3400 rpm. with aluminium propeller 300 mm Electric motor: Used electric motor 0.25 KW, 3 x 230/400 volts, n = 3,400 rpm, Weight approx. 10 kg. With motor protection plug. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid clutch made of aluminium. Stirring organ: Two-flyer aluminium propeller d = 300 mm.

- in V2A - mobile - 1 m diameter - 900 mm high - 700 l capacity - with agitator 0.55 kW and 99 rpm - with full and empty detector

n1-n2= 60-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90

n1-n2= 60-2000 rpm digital 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

n1-n2= 50-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

n1-n2= 50-6000 rpm without speed controller, without switch Dimensions LWH: 200 x 100 x 500 mm

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

Agitator,stainless steel,Ekato EMO 40,1,5 kW,570 rpm.

Agitator,stainless steel,ØHK,Ø 200 mm propeller

Agitator,stainless steel,Scaba

Agitator,stainless steel,Ø 280 mm impeller

Agitator,stainless steel,Ekato type EMO 60