We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm
used
Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide
used
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
used
Description: Commission number 1876, infeed conveyor belt, conveyor length approx. 6000 mm, belt width approx. 1400 mm, additional infeed conveyor belt, transversely movable, conveyor length approx. 6000 mm, scissor lift table total length approx. 6000 mm, belt width approx. 1800 mm, continuous short-cycle press 2-stage, press area approx. 5800 x 1800 mm, 12 press cylinders per floor, max. pressing pressure 604 t, special pressing pressure 72 N/cm², operating pressure 320 bar, drive power 30 kW, removal lifting table with roller conveyor, total length approx. 7500 mm, roller width approx. 1800 mm, with protective grid enclosure, maintenance stairs for upper press, switch cabinet system and operating panel with SIEMENS S 7 control system and SIMATIC touch panel Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 80,000 kg
used
Description: consisting of feed roller conveyor, total length approx. 6700 mm, roller width approx. 2250 mm, with aligner, WEMHÖNER AWF cleaning system, year 1996, serial number 701, passage width approx. 1400 mm, HYMMEN UMA double-sided glue application machine, year 2000, serial no. 2000, serial no. 0165-40552-1, roll width approx. 1400 mm, disk roller conveyor total length approx. 7000 mm, roll width approx. 1400 mm, feeding station for endless roll goods or single strips for the underside, max. roll width 1400 mm, max. length for single strips approx. 5500 mm. Length for single strips approx. 5500 mm, portal system with panel lifter for lifting the pre-glued worktops onto the bottom layer provided, vacuum lifter for loading the top layer onto the pre-glued workpiece, feeding of the top layer also as endless material from the roll, max. roll width approx. 1400 mm, or as single strips ...
used
Description: Roller conveyor W 190, serial number 87, total conveyor length approx. 7000 mm, roller width approx. 2000 mm, with cross transfer device and light barrier system, vacuum portal with suction traverse above removal roller conveyor, length approx. 7000 mm, roller width approx. 1800 mm, 2-sided stacking with one roller conveyor each, roller width approx. 1550 mm, length approx. 5900 mm, cross transfer carriage length approx. 5500 mm, including control cabinet with SIEMENS control system and protective grid enclosure Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 7,500 kg
used
Description: consisting of cross transfer carriage with rotating roller conveyor, roller conveyor length approx. 5900 mm, roller width approx. 1550 mm, portal loading with vacuum lifter, 2 feed roller conveyors each 5900 mm long, roller width 1550 mm, vacuum portal with 15 suction plates, conveyor roller conveyor to plate turner, plate turning device W 170, built in 1996, transport roller conveyor with inclined rollers, conveyor length approx. 6000 mm, including bridge over roller conveyor, with protective grid enclosure, control cabinet with SIEMENS control system and SIEMENS SIMATIC touch panel Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 8,000 kg
used
Description: consisting of roller conveyor W 86, serial number 191, roller width approx. 1300 mm, conveyor length approx. 6000 mm, with staircase transition, followed by a turning station W 170, serial number 76, total length approx. 6000 mm, further transport roller conveyor W 86, serial number 192, roller width approx. 1300 mm, total conveyor length approx. 6000 mm, portal stacking W 284, serial number 184, with portal and vacuum lifter as well as 3 stacking roller conveyors, length approx. 5900 mm each, roller width approx. 1550 mm each, 3 removal roller conveyors, length approx. 5900 mm each, roller width approx. 1550 mm, cross transfer carriage, total length approx. 6000 mm, roller width approx. 1550 mm, including safety fences and control cabinet with SIEMENS control, SIEMENS SIMATIC touch panel Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 12,000 kg
used
Wemhöner Variopress Wood Press Machine is in very good condition
used
Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg
used
Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -Roll width: 990 mm -Conveying length: 4800 mm -Diameter roller: 85 mm -Center distance: 155 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 4900/1350/H1100 mm -Weight: 1190 kg
used
Roller conveyor, conveyor belt, roller conveyor belt, dust blow-off machine, roller conveyor cleaning machine -with adjustable baffle -Compressed air blow-off nozzles below/above -Roll width: 950 mm -Conveying length: 4600 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm -driven: via gearbox -Geared motor: 0.25 kW -Speed: m/min -Dimensions: 1400/4700/H1400 mm -Weight: 600 kg
used
Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -2x laterally movable arms extendable 600 mm to center the material to be conveyed -Roll width: 920 mm -Conveying length: 3500 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 3700/1280/H1020 mm -Weight: 820 kg
used
Roller conveyor, conveyor belt, roller conveyor belt, dust brushing machine, cleaning brushing machine, brushing device, cleaning machine, roller conveyor -with adjustable baffle - Finishing: with a soft brush on top - Compressed air blow-off nozzles at the bottom -Roll width: 1100 mm - Conveying length: 3200 mm -Diameter roller: 85 mm - Center distance: 150 mm -driven: via gearbox -Speed: m / min -Dimensions: 1600/3300 / H1350 mm -Weight: 600 kg
used
Turning device, edge processing, turning station, turning table, turning station, turntable, transport system, roller conveyor -for edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: Narrow -Roll width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable baffle -Roller conveyor: wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Turning head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg
used
Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm
used
Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994
used
Manufacturer: Wemhöner Stapelwender, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding engine kw: yes, Working hight mm: 320, Roll transport: yes, Single machine: yes,
used
Manufacturer: Wemhöner , Type: Doppelseitige Prägeanlage, Year: 2002, Control: Siemens, Operating side: 6-15, Work piece width min-max mm: 100-200, System dismantled: yes, Prägestationen: 2, Reinigungsbürsten Stück: 4, Doppelseitig: yes, FREE TEXT: Transportsystem Wemhöner Vakuum, Year :2002
used
Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996
used
Manufacturer: unbekannt, Year: Neuwertig, Control: no, Working length mm: 1500, Working widht mm: 600, Total hight mm: 900, Frequency converter: yes, Total hight mm: 900, Required space L x W x H mm: 1600x780x1000, Weight approx. kg: 150, FREE TEXT: Bauhhöhe versetllbar, Year :Neuwertig
used
Manufacturer: Wemhöner, Type: AWF, Year: 2002, Control: no, Working length mm: 1700, Working widht mm: 380<CRLF>, Total hight mm: 900, Belt width: 300, Frequency converter: yes, Total hight mm: 900, Engine power kW: 0,55, Required space L x W x H mm: 1800x500x1000, Weight approx. kg: 150, FREE TEXT: Bauhhöhe versetllbar, Year :2002
used
Manufacturer: Wemhöner , Year: 1997, Type: Vario pin Presse, Control: Siemens S 5, Number of tables: 2, Automatisches Rüsten: yes, Pin-Sytem: yes, Heating system: Elekto, Nutzfläche : 1290 X 2500, min.Folienbreite: 1450, Min.-max. workpiece height in mm: 10-40, Press length mm: 2500, Pressing width mm: 1290, Work piece thickness max mm: 40, Membrane: yes, Foil magazin spaces: 4, Kammerdruck: 6 bar pneumatisch/360bar Hydraulschi, Through running machine: yes, Membrane: yes, Landing opening mm: ca.80, Längsdurchlauf: yes, Automatische Entleerung: yes, Through running machine: yes, FREE TEXT: Automatischer Folienozug mit Schneidanlage und Abnahmestation mit Wender/, Year :1997
used
Manufacturer: Folienpaternoster motorisch Drehbar, FREETEXT1: 24 Folienrollen, FREETEXT2: max Länge 1700 mm, FREETEXT3: max. Durchemsser 400 mm,
used
Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997
used
Manufacturer: Wemhöner, Spare part from machine: Doppelendprofiler, Type: Wemhöner, Year: 2006, Quantity: 4 Sätze komplett mit Gegendruckkufen, FREETEXT1: bestehend aus, FREETEXT2: 4 StückOberdruckkufen, FREETEXT3: 4 Gegendruckkufen, FREETEXT4: 4 Wechseldruckdufen mit Druckluft Unterstützung, Year :2006
used
Manufacturer: Wemhöner, Spare roller: Wemhöner, Roller rubber coating: 1740, Shore Härte: ca 30, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 200, EPDM: yes, Creasing on a 1 cm: ca 26, Diameter of neck: 50, Total lenght mm: 2400,
used
Manufacturer: Wemhöner, Working length mm: 1400, Working widht mm: 600, Total hight mm: +/-1000,