We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Loading lift table for covered outdoor areas – used- : Price from location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lift table in special design, ELS 1-10-TI-SO Year of construction: 2017 Height (h): 200mm Effective stroke (N): 1000mm Maintenance stroke: 1000mm Final height (H): 1200mm Total length: 1,800mm Total width: 1,000mm Stroke category: 4 Weight: approx. 450kg Load: Load capacity: 1.000kg Load distribution: surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Condition: very good Available: now Location: Stuttgart-Feuerbach A detailed description of the article is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is located on the ramp. A Euro pallet is transported with pallet trucks. ...
used
Tailstock stroke max. 130 mm Specifications: Turning diameter max. 360 mm Turning diameter over support 180 mm X-axis travel 230 mm Z-axis travel 620 mm Control SINUMERIK 828 D Spindle bore 40 mm Weight approx. 1600 kg Dimensions (LxWxH) approx. 2510x1670x2050 mm Year of construction 2014
used
ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW
used
Radial Drilling WAGNER type PRC 35 Spindle CM4 Spindle exit: 220 mm Spindle speed: from 32 to 2500 RPM Arm/trolley travel: 700 mm Year of construction: 1989 Column diameter: Ø 230 mm Max height table/spindle nose: 1000 mm (table in high position) Automatic descent Hydraulic locking of the column rotation + trolley Mechanical locking of the up/down Cube dimensions: L 800 x W 450 x H 450 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 900 x 2250 mm in high position Weight: approx 2 T
used
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
used
Max. longitudinal movement of the table: 400 mm Z-axis stroke: 200 mm Digital display of travel paths Tool holder: SK 40 Weight: approx. 1000 kg
used
Wagner Electric Magnet Strap Brand: Wagner Length frame A.A.= 2600 mm Belt width : 1000 mm Drive: 2.2 kW drum motor Block : 1250 x 950 x 450mm Power requirement : 3 kW Inclusive rectifiers.
used
High-rack stacker with 1.2 m lateral insertion path Lifting capacity 1 t Lifting height 10 m Battery still very good Forklift is still in very good condition, has been serviced regularly.
used
Machine Details Stock-No. 1105-03885 Type of machine CNC Lathe - Inclined Bed Type Make WAGNER Type WDC 480 Year of manufacture 2014 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 295 mm turning length 1250 mm control SIEMENS 828 D max. swing diameter 460 mm spindle head KK6 DIN 55026 Bar Material Dia. 52 mm turning speed range 3500 rpm spindle drive 7 kW Torque 151 Nm tool diameter 32 mm Rapid Traverse 30/15 m/min total power requirement 18 kW Weight of the machine approx. 3.4 t dimensions of the machine approx. 2.5 x 1.7 x 1.8 m Accessories Power Chuck 250 mm Additional information CNC SIEMENS 828 D TURRET VDI 30 with REITSTOCK CHIP CONVOYER
used
WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...
used
Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.
used
CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories
used
Used WAGNER Flexcontrol Plus mixing and dosing system control Electronic 2K mixing plant for high and low pressure requirements. For solvent paint 2K, 3K and 4K varnishes and adhesives Water-based 2K, 3K and 4K paints and adhesives With operating instructions Comes from company dissolution Functioning Original price of the controller approx. 8000.-Euro Good condition.Inspection and pick-up possible. Shipping Germany (without islands) 100,00 Euro net Sale to traders without warranty The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.
used
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
used
used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW
used
Electrostatic painting line Wagner with conveyor Technical specifications: Pumps for providing of material Leopard 35-150,pcs -2 Washing pump Leopard 35-70 Painting manipulators + guns, pcs - 2+4 Capacity, Kwt - 5,5 Max. material pressure at the pump inlet, MPa-Bar-Pound / m² - 2-20-290 The pH value for the material, pH - 3.5 ÷ 9 Material temperature range, ˚С - +5 ÷ +80 "Ambient temperature range, ˚С - +5 ÷ +60 " Permissible angle of inclination at work, ˚arcs - ± 10
used
Description Brand Wagner Model Cobra 40-25 ID 7206 Status Active Price 2.600 € + VAT Year of manufacture 2014 Location Oradea (RO) High pressure diaphragm pump for coating Wagner Cobra 40-25 manufactured in 2014. Pressure ration: 40:1, Maximum fluid pressure: 250 bars, maximum flow rate: 5 l/min, weight: 32 kg. Application areas: wood and furniture industry, carpentry shops and joineries, agriculture, construction and earth moving, general metal industry, leather coating. Processable materials: water and solvent-based paints, wood coatings, moisture-sensitive materials, isocyanates, shear-sensitive coatings, UV-cure materials, temperature reactive materials (acrylics, for example), zinc primers. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least ...
used
Wagner SCR 160 well-kept radial drilling machine. Throat depth 1600mm. Speeds from 25 to 2000 RPM. Feed 0.04-3.2 RPM. Clamping table 630 mm x 500 mm x 500 mm. Cooling metering pump.
used
Stable Eletro-thrust mast forklift Wagner Capacity: 1250 kg Lifting height: max 7.1 m 24 volt system - 3 wheel - Tripplingmast smooth starting and driving Stable wide wheel base very guterStand Hydr functions: Lifting - thrust (forward) - tilt - side-shift Truck weight without Batt.: 2680 kg Battery weight: 611 kg Mass approx.: width: 1.71 m length: 1.78 m (eingefah. Thrust mast) Height: run-in mast: 3 m Tine length inside 90 cm Accessories: Charger & battery (used) The truck is in very good used condition vorfuehrbar in stock
used
There are six welding machines available, including control cabinets, without documentation.
used
Length: 2100mm, width: 1200mm, height: 2000mm, weight: 3.35t.
used
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible.
used
max. workpiece diameter: 40 mm threading length: 300 mm pressure: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
saw blade diameter: 275 mm cutting diameter: 10 - 70 mm cutting range - square -: 65 x 65 mm cutting range - flat -: 120 x 60 mm cutting length min.: 5 mm cutting lenght max.: 1000 mm control: minipos 807 cutting speed: 8 - 100 m/min sawing motor: 2,2 kW feed: 25 - 1000 mm/min rapid return speed: 10 m/min work height max.: 1000 mm total power requirement: 3,5 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 2,25 x 1,53 x 2,15 m Accessories: loading table with feed roller conveyor and replenishment trolley for bar lengths up to 6000 mm, measuring stop (hydraulic dampened), chip conveyor, coolant Dimensions machine: 2,25 x 1,53 x 2,15 m Diemnsions loading table: 7,25 x 1,08 x 1,23 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
USED WAGNER WMC 1400, PRODUCED IN 2013, IN A VERY GOOD CONDITION, UNDER POWER. SPECS: - max. X/Y/Z axis travels: 1400/700/600 - work table dimensions: 1550 mm x 700 mm - max. workpiece weight: 1000 kg - max. spindle speed: 8000 rpm - control: Siemens Sinumerik 828 D. machine still in use.
used
This Wagner WPB 340 A Sawing machine was manufactured in the year 1993.
used
x-travel: 1300 mm y-travel: 500 mm z-travel: 570 mm spindle taper: SK40 spindle turning speed - stepless: 60 - 6000 U/min rapid traverse: x/y/z 7,5 m/min Number of tools: 16 St. table surface area: 1500 x 400 mm workpiece weight: 700 kg total power requirement: 12 kW weight of the machine ca.: 4100 kg dimensions of the machine ca.: 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 1200 mm width: 500 mm floor-plate height: 105 mm weight of the machine ca.: 400 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Power: 6,1/3,8 kW - Amperage: 27,8/17,2 A. - Voltage: 220 V. - 100% ED Magnet L x W: 1.800 x 1.150mm - Conveyor belt: 1.200mm - AA.: Ca. 2.750mm - With Transformer Rectifier of 380V. Primary
used
Airless sprayer, painting device, spray pack, electrostatic sprayer, airless complete system -Manufacturer: Wagner, airless sprayer unit type: 33-70 -Material flow: max. 12.6 l/min 1.6 gal/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Spray gun: missing, individual components see photos -Dimensions: 900/300/H470 mm -Weight: 28 kg