VOUMARD used machine for sale

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture at the bottom left ! Other spindles on request !

Internal cylindrical grinding machine with flat grinding device, VOUMARD 404 N2X2/700, See pictures attached

Grinding spindle VOUMARD M60DR, max. 60000 rpm, approx. 160 x 300 mm long Next: grinding spindle VOUMARD C28-9D

CONTROLS   CNC controls GE FANUC SERIES 18I-T WORKING RANGE INTERNAL GRINDING   grinding diameter (max): 300 mm WORKPIECE SPINDLESTOCK   spindle revolutions (max): 850 /min SPINDLESTOCK GRINDING SPINDLE   rotating range B-axis up to: 15 ° SPINDLESTOCK INTERNAL GRINDING   Z-axis travel: 500 mm   X-axis travel: 200 mm   spindle revolutions (min): 30000 /min   spindle revolutions (max): 60000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3300 mm   space requirements -front/back-: 1950 mm   total height: 2150 mm   total weight approx.: 5000 kg Machine equipment: - 3 internal grinding spindle positions 30,40,60,000 rpm - 2 degree angle adjustment controlled (pr ...

grinding diameter: 100 mm grinding depth: 120/230 mm grinding table stroke min./max.:: 2mm table speeds: 0-20 m/min centre height: 1055/235/130 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Min. grinding diameter: 5 mm Max. grinding diameter: 300 mm Max. grinding depth: 250 mm Max.workpiece length + steady: 1400 mm Axial motion: Longitudinal travel (Z-axis): 600 mm Work piece spindle head: speeds: from: 0 rpm up to: 1000 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 3400 kg Overall dimensions machine: Length: 4350 mm Width: 1820 mm Height: 1860 mm Various accessories: Wheel trueing attachment Front grinding device redresser Coolant system Set of flanges for internal grinding Lamp Frontal grinding device Steady 3-jaw chuck diameter: (2x) 250 / 200 mm Internal grinding spindle:: ELECTRO number: 4 max. speed: VMS 40-5 40000 rpm max. speed: VMS 60-5 60000 rpm max. speed: VMS 15-5 15 ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Oi Mate TD Technical data Min. grinding diameter: 20 mm Max. grinding diameter: 300 mm Max. grinding depth: 300 mm Max.workpiece length + steady: 1200 mm Centre height: 300 / 430 mm Axial motion: Longitudinal travel (Z-axis): 650 mm Cross travel (x-axis): 150 mm Spindle head (u axis): 500 mm Work piece spindle head (B-axis): +/- 20 ° Max. axial speeds: Z axis (longitudinal travel): 12000 mm/min Grinding spindle head: Grinding spindle motor: 6.5 / 7.8 kW Machine´s weight about: 9500 kg Overall dimensions machine: Length: 5000 mm Width: 2300 mm Height: 2400 mm Various accessories: Wheel trueing attachment Coolant system Paper band filter Steady

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: Allen Bradley PanelView Plus 1000 Technical data Min. internal grinding diameter: 3 mm Max. internal grinding diameter: 50 mm Centre height: 240 mm Grinding spindle head: speeds: from: 350 rpm up to: 1200 rpm Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2300 mm Dimensions of the control: Length: 450 mm Width: 1000 mm Height: 2400 mm Various accessories: Touch screen Wheel trueing attachment Vibrating / oscillating conveyor Status light Loading attachment Parts catcher Switch cabinet Air conditioner

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 3.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 80 mm Centre height: 200 mm Workpiece spindle speeds: number (steps): 5 from: 350 rpm up to: 1200 rpm Max. angle: 120 ° Spindle hole: 25 mm Possible grinding-spindle speeds: from: 9000 rpm up to: 120000 rpm Grinding table travel: min.: 2 mm max: 300 mm Table speeds: stepless from: 0.10 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Drive for internal grinding spindle: 15.0 kW Machine´s weight about: 2200 kg Overall dimensions machine: Length: 1800 mm Width: 1500 mm Height: 1600 mm Various accessories: Face grinding attachment Internal grinding spindle:: AIR number: 1 max. speed: 80000 rpm

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 2755 Technical data Number of axis total: 4 (X/Z/C/B) Number of spindles: 4 Max. grinding diameter: 350 mm Max. grinding depth: 350 mm Max.workpiece length + steady: 1300 mm Swing diameter: Above the workpiece table: 450 mm In front of the workpiece table: 680 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 200 mm Resolution: 0.0005 mm Rapid traverse Z: 20 m/min Rapid traverse X: 20 m/min Grinding spindle head: Swivelling range: -10 / + 30 ° Resolution: 2 ° Operating time: 2755 Hour Air connect: 5 bar Voltage 50 Hz 3x: 400 Volt Total power required: 20 kVA Machine´s weight about: 5000 kg Overall dimensions machine: Length: 3500 mm Width: 2700 mm Height: 2150 mm Various ac ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series Oi-TD Operating hours: 6000 Technical data Number of spindles: 4 Min. grinding diameter: 3 mm Max. grinding diameter: 200 mm Workpiece length max.: 600 mm Swing diameter: Above the workpiece table: 230 mm In front of the workpiece table: 350 mm Centre height: 130 mm Centre height over slide: 200 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 120 mm Spindle head (u axis): 150 mm Feed range: Z axis (longitudinal travel): 0 - 99.99 mm/min X axis (transversal): 0 - 99.99 mm/min Rapid traverse Z: 15 m/min Rapid traverse X: 5 m/min B axis swivelling range: -32 / + 2 ° Resolution: 0.0001 ° Grinding spindle head: Resolution: 0.001 Air connect: 5 bar Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.3 ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5.0 mm Max. internal grinding diameter: 200 mm Grinding depth: 250 mm Centre height: 180 mm Distance between centres: 1000 mm Workpiece spindle speeds: number (steps): 6 from: 125 rpm up to: 1000 rpm Spindle hole: 50 mm Grinding spindle speeds: from: 0 rpm up to: 12000 rpm Grinding table travel: min.: 3 mm max: 600 mm Table speeds: stepless from: 0.40 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 1.00 kW Drive for internal grinding spindle: 3.7 kW Total power required: 8.7 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1800 mm Width: 900 mm Height: 1500 mm Various accessories: 3-jaw chuck diameter: 200 mm Steady

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Min. grinding diameter: 3 mm Max. grinding diameter: 50 mm Centre height: 200 mm Axial motion: Longitudinal travel (Z-axis): 300 mm Cross travel (x-axis): 90 mm Work piece spindle head (B-axis) Swivelling range: -5 / 60 ° Possible grinding-spindle speeds: from: 55000 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 10-15 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 3000 mm Width: 2300 mm Height: 2200 mm Various accessories: Wheel trueing attachment Macnetic chuck diameter: 200 mm

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5.0 mm Max. internal grinding diameter: 200 mm Grinding depth: 250 mm Centre height: 180 mm Distance between centres: 1000 mm Workpiece spindle speeds: number (steps): 6 from: 125 rpm up to: 1000 rpm Spindle hole: 50 mm Possible grinding-spindle speeds: from: 3600 rpm up to: 40000 rpm Grinding table travel: min.: 3 mm max: 600 mm Table speeds: stepless from: 0.40 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 1.00 kW Drive for internal grinding spindle: 3.7 kW Total power required: 8.7 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1800 mm Width: 900 mm Height: 1500 mm

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: kW weight of the machine ca.: t CNC Internal Grinder w.2 Station Turret, Chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.