We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Inv. Num. : 6951 Type: BKoE 630x1000 Producer: VEB Generated:- Parameters: Working table length: 1000 mm Working table width: 630 mm Minimum spindle speed: 36 1/min Maximum spindle speed: 2240 1/min Maximum distance between the spindle axis and the table: 20-850 mm Spindle power: 9 kW Machine weight: 5900 kg
used
Hydraulic press PYE 160SS
used
Hydraulic press PYE 100S1.
used
Manufacturer: VEB Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2.7 t
used
These are NVA carriages, these were used to transport field kitchens or water barrels. The carriages can be adjusted in height, the previously assembled field kitchens could be set down with the carriage. unbraked, very good condition, 5 pcs and still spare tires. Tyre size 7.50-16 Private sale on behalf of customers. The carriages are ideal for building a wooden wagon / trailer. There are 4 loop points so that you can construct the structure so that you can set it down.
used
Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg
REWINDER STRIP WIDTH: 650-710 MM, THICKNESS: 0.5-0.65 MM,
1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C
THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;
used
total power requirement:16,5 kW weight of the machine ca.:3,8 t
used
Description: Fabrication number: 862005 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 4.9 A Connection: 1.8 kW Table dimensions: 950 x 110 mm Grinding wheel diameter: approx. 100 mm Incl. various machine accessories such as magnetic clamping plate, dividing heads, holders, clamping elements and other spare parts In addition, a larger lot of grinding wheels as well as an extraction unit and 2 workshop cabinets with matching accessories weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 1,700 mm
used
Description: Rotary table Chuck diameter 240mm Table size 520 x 350mm Motor 2.2kW with engine brake see pictures weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,500 mm
used
Description: Rotary table Chuck diameter 200mm Table size 520 x 350mm Motor 2.2kW with engine brake see pictures Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,300 mm, weight approx.: 100 kg
used
Description: Nominal force: 160 Np Operating pressure: 144 kg/cm² Ram stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Speed downwards: 200 mm/s Upwards: 250 mm/s With deep-drawing device under the worktop weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm
used
Description: VEB Testing Machine Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 2,300 mm, weight approx.: 500 kg
used
Description: Flow rate: 400 m³/h Negative pressure: max. 1250 Pa Density: 12 kg/m³ Operating temperature: max. 50° Approx. Onsite Dimension. (l x w x h): 500 x 400 x 1,300 mm, weight approx.: 70 kg
used
Description: working length: 2500 mm max. thickness of cutting material: 12 mm S235, S355 manual limiter adjustment machine is mechanical with a flywheel hydraulic sheet metal presses plate thickness: 12 mm, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,050 x 2,050 mm
used
This VEB FSS 400/E Milling machine was manufactured in the year 1987.
used
This VEB PYE/25/1 Bending machine was manufactured in the year 1975.
used
Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 100 rpm -Power: 0.75 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -Weight per piece: 44 kg
used
Three-phase motor, electric motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 190/110/H155 mm -Weight: 4.9 kg
used
Pillar jib crane, indoor crane, workplace crane -Manufacturer: VEB, pillar jib crane, load capacity 250 kg -Base plate: 440 x 440 mm -Projection: 1,800 mm -Total height: 2,700 mm -Hook height: 2,490 mm -Chain hoist: VEB type 250F -Main stroke: 6.0 m / min -Fine stroke: 1.5 m / min -Transport dimensions: 2530/800 / H440 mm -Own weight: 272 kg
used
Three-phase motor, electric motor -Power: 2.7 kW -Speed: 1450 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 410/310/H240 mm -Weight: 36 kg
used
Stick electrodes 3.25 x 350 -Type: Guarantor -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg
used
Gear motor, electric motor, electric gear motor -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 38 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 530/210/H240 mm -Weight: 44 kg
used
Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm -Dimensions: 280/600/H190 mm -Weight: 38 kg
used
Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 0.25 kW -Voltage: 220V -Volume flow: 25 m3 / h -Print height: 1500 mm WS -Dimension: O 330/425 mm -Weight: 13 kg
used
Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.80 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: EX -Dimensions: -Weight piece: 44 kg
used
Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø 8 mm -Dimensions: 600/100/H475 mm -Weight: 13.1 kg
used
Vacuum pump, rotary vane pump -Manufacturer: VEB, vacuum pump type VZ30 -Drive: 1.1 kW -Flow rate: 30 m³/h -Speed: 1415 rpm -Dimensions: 730/340/H520 mm -Weight: 75kg