5 offers uraca

Category: 1300 other machines and plants
Latest update: 04.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151990502
used
Seller: country-de DIROJET GmbH

High-pressure pump/high-pressure plunger pump/channel rinse pump Uraca KD716-G (with integrated gearbox i=3,32) Data Plunger: d 65 mm Operating pressure: 140 bar Flow rate: depending on the drive power/drive speed, see data sheet. Such as. 370 l/min. at 1800 min-1 309 l/min. at 1500 min-1 247 l/min. at 1200 min-1 206 l/min. at 1000 min-1 translation: i=3.32 Gearbox shaft: 46 mm Drive: left or right with engine cooler Description Condition: Overtaken in 2019 and in very good condition. The following parts have been reinstalled: - Roof cuffs - Coat rings with O-rings - Shaft sealing ring - Pressure valves and suction valves - Sealing rings of the pressure valves and suction valves - Stupfbuchnuts - Printed pieces - Valve lifts - All seals

Category: 1300 other machines and plants
Latest update: 04.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151990499
New in: 2004
used
Seller: country-de DIROJET GmbH

Stationary high-pressure pump unit / high-pressure cleaning device URACA RS716E/200 on base frame for all cleaning tasks. Similar/no Hammelmann, Woma, Kamat Pump type: KD716-K Version A2 Operating pressure: 200 bar Flow rate: 73 l/min. Pump speed: 298 RPM Drive power: 29 kW with ADDA 30 kW 3 motor, 1500 rpm, 400V, 50Hz, IP55, B3, IEC with URACA HHV5-64 safety valve Dimensions LxWxH: approx. 2170x1100x790 mm Weight: approx. 800 kg Built: 2004 Condition: in very good used (completely tested and overhauled 2020) condition.

Category: 1300 other machines and plants
Latest update: 04.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151990534
New in: 2000
used
Seller: country-de DIROJET GmbH
Location: 33378 Rheda-Wiedenbrück

STATIONary high-pressure pump unit URACA RS705E/180 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat - Pump type: KD705 Operating pressure: 180 bar Flow rate: 51 l/min. Drive power: 18.5 kW Required inlet pressure: approx. 2 bar Plunger: d28 mm Plungerhub: 42 mm Pump speed: 690 min-1 Suction connection: G2 Pressure connection: M24x1,5DKO - Safety gauge 0-250 bar - C-coupling, suction side - Dirt catcher G 1 1/2 suction side - complete belt drive with belt protection - Three-phase motor SCHORCH 18.5 kW, 1450 min-1, 400 V, 50 Hz, type B3, IP 54 IP 55 - URACA MSSV 24/250 safety and switching valve - Electro-pneumatic control panel in the sheet metal box, for pump regulation via electr. Signal, pressure gauge for air input pressure, precision pressure regulator with handwheel, pressure gauge for control pressure, electro-pneum ...

Category: 1300 other machines and plants
Latest update: 04.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151990515
New in: 1995
used
Seller: country-de DIROJET GmbH

STATIONary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Flow rate: 56 l/min. Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3 motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm Weight: approx. 1.115kg Built: 1995 Condition: in good used condition.

Category: 1300 other machines and plants
Latest update: 04.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151990509
New in: 2012
new
Seller: country-de DIROJET GmbH

Uraca PÜV 8/200 Safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but no Hammelmann, Woma, Kamat Ab. Operating overpressure: 50-200 bar Mpf. Flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Built: 2012 (unused) VE water: Suitable for operation with demineralized water. Electro-pneumatic control: Takes over the switching command and the pressure adjustment of the valve. Slit seal: Serves the exact reproducibility of the response pressure. For more technical data, see data sheet. Keeps the operating pressure constant regardless of the nozzle assembly. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high responsiveness, high response dynamics, cone can be used on two sides.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online