SATO used machine for sale

CNC control Sato Elektronik CNC 801 Plasma Source Hypertherm Powermax 1650 / 100 A Cutting capacity of the plasma beam in continuous operation 32 mm Cutting surface approx. 2500 mm x 4000 mm

Ref.-No. 00761 no2rot Sato Satronik C4500 16,5mx3,7m - Plasma cutting system XXL (red) Manafacture: Sato Type Satronik D 4500 (Red) Control Sato CNC 300 Working area 16.5m x 3.7m Year of construction: 2001 Addendum: There is a second broken controller which is no longer used. Serves as a spare parts donorB Power source: 230V 3 cutting heads – all in function System can be demonstrated under power The extraction system is included Technical condition is good Maintenance plant was serviced on 22.12.2023 by an external company There are also service reports The system can be demonstrated under Storm Deadline immediately

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

Sato Satronik C 1500, Y.O.M. 98Control 801Travel distances 2500mm x 1500mmSuction table Kemper 3000mm x 1500mm, Y.O.M. 2012Extraction Kemper 8000, Y.O.M. 2012, but with 0 operating hours, for outdoor installation, with portable control panel, plasma source Hypertherm Powermax 1650,laptop with laptop with Lantek programing softwareAssembly and commissioning on request; ready for immediate use

Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use

Portal bridge SATRONIK HD 4000 CNC web control CNC 3000M - driving along reference limit switch in X and Y direction - double-sided racks for existing track rails for cutting lengths of 13m (16 m racks) plasma inter Lock circuit for a plasma power source plasma system Kjellberg Fine Focus 800 , cut up to 80mm (cutting data see PDF) -suction-cutting table 3200 x 13200 mm - 2 tables a 1600 mm next to each other filter system type DOWNFLO DFPRO 12- ZU 562 (external installation) The system is under current . Dassembly and commissioning on request; ready for immediate use

; ready for immediate use

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

; very good condition, like new

Guide machine Manufacturer: SATO Type: SATRONIK G 1500 Control: CNC 3010 Size: 4000 x 1500 mm Year of construction: 2008 operating hours: 8,090 h (machine on) plasma plasma Source Manufacturer: Kjellberg Type: Hi-Focus 280i Additional equipment: Automatic gas control PGV 3 Year of construction: 2008 operating hours: 728 h (plasma jet on) suction system Manufacturer: Donaldson Type: Torit DCE, DFPRO 6-CYCLO Year of construction: 2008 to visitunder electricity Very good condition mining and commissioning on request; ready for immediate use

; ready for immediate use

SATO FB 3000 Control CNC 801 Power sources 2 x Thermadyne Merlin 6000 a150A Cutting data see PDF Year construction: 1999 cable design for 12m travel distances 12000 x 3000mm Water table: 8000 x 2000mm Many wear parts available, 1 spare burner. ; ready for use

; Operational

Working range: 2500mm x 6000mm rail length: 8000 mm track width: 3000 mm racks and drive pinion renewed at the end of 2011. Last recovery at the end of 2011. Control Sato CNC 3000 2 x Autogen 1 x Plasma Kjellberg 160 i with automatic gas console (see Pdf) 1 x Support for koerning Complete with table and suction assembly and commissioning on request ; ready for immediate use

; ready for immediate use

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

; ready for immediate use

Sato LS 2500 CNC 3010 working range: 2000mm x 4000mm 1 x Plasma 280i Kjellberg with automatic gas console Recommended cutting range from 0.5 to 50 mm Materialstaerke (HiFocus 280i) with suction system very good condition, on request ready for immediate use

; ready for immediate use

Label printer Sato S8408 Mounted on a aluminium frame, inclusive mounted spool for winding labels Very neat and recent printer

Table dimensions: 2000x4000mm, max. stainless steel/ steel thickness: 20/ 25mmm, fuel: oxygen, propane, controls: CNC-801, with documentation and plasma power source Powermax 1650, the extraction needs overhauling.

This SATO Satronik LS2000 Plasma Cutting Machine was manufactured in the year 2011 in Germany. It is equipped with a CNC 310-3 control unit. The machine includes a satomatic HV S 250 PT CNC arc height sensing and a plasma interlock circuit for a plasma tower.

This SATO LS 3500 Plasma Cutting Machine was manufactured in the year 2008. It is equipped with a SATO CNC 3010 control unit. The machine has a Working width of 3100 mm.

Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Oxycutting gantry Brand: SATO Model: SATRONIK HD 8000 8 Oxycutting torches (2 TRIPLEX torches) SATO control with gas console. Year: 2000 Useful cutting capacity: 6,000x24,000mm

SATO SATRONIK D 5000 gas cutter Machine in good condition Its in production

Thermal/thermal transfer printer for printing labels Print speed (max): 305 mm/s (12ips) Mounted on a stand Possibility of attaching to the production line with adjustable height and angle of inclination. The label is applied by blowing the label onto the packaging after triggering with a photocell.

Satronik LS 4-head oxy-cutting pantograph Plant decommissioned from the component production line for the earthmoving sector. Cutting with oxy-fuel technology on the water surface to avoid material deformations. Water type bench with scraper. Bench dimensions [mm] 3.700 x 7.700 Machine performance Useful cutting dimensions [mm] 3.000 x 12.000 Thicknesses with 1 torch [mm] 300 mm Thicknesses with 4 torches [mm] 100 mm Breakthrough [mm] 200 Cut starting from outside or pre-hole [mm] 300 Specifications from product sheet Width x Working length (A): 2.000 x 6.000 mm - approx Width x Total length (B): 3.700 x 7.700 mm - approx Total height (C): 2,100 mm Stroke height: 550 mm Feed speed: 20.000 mm / min Cutting table height: 650 mm Max no. Of torches / torches: 6