RAS used machine for sale

Machine Type: Guillotine Shears Manufacturer: RAS Model: 54.30 Year of construction: 1975 Condition: very good Offer Type: Used Machine Specifications: Capacity: 1040 x 4.0 mm Drive type: el./mech. Propulsion: 7.3 kW Remark: rip fence, Material supports and stop at the front, 2 spare blades Weight: 2000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Key data: 2040 mm, 2 mm

Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 2003 M Condition: very good Offer Type: Used Machine Specifications: Capacity: 2040 x 2.5 mm Drive type: el./mech. Propulsion: 0.75 kW Remark: backgauge, 5 additional bending rails Weight: 1800 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Offer 23317 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Minimum inboard height 6 x sheet thickness - Automatic sequential control for a complete workflow - Operation via hand or foot switch - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Key data: 1040 mm, 2 mm

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop Knife sharpened Weight: 750 kg

Key data: 1040 mm, 2 mm

Type 52.70 Specifications: Cutting length 1040 mm Sheet thickness in St 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Motorized back gauge up to 500 mm Stroke rate approx. 60 rpm

Key data: 1020 mm, 1 mm

Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 61.1 Year of construction: 1965 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 1.5 mm Drive type: manual Remark: Material support at the back Weight: 220 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Working lenght 2040 mm Max material thickness 5 mm

Lockformer RAS type 22.15 Power: 2,2 kW Maxi thickness: 1,5 mm Wheel diameter: Ø 85 mm x 40 mm Voltage: 380 V Dimensions (L x W x H): 1700 x 600 x 1100 mm Weight: approx 350 kg

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Key data: 2040 mm, 2 mm

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge adjustable from the front up to 550 mm Pneumatic sheet metal holding Knife sharpened Weight: 1100 kg

Max. bending length: 3,200 mm Max. sheet thickness: 2.5 mm steel Segmented upper beam splint Manual and automatic bending mode possible Bending angle adjustment via potentiometer Weight: 3800 kg

Cutting length: 1020 mm Sheet thickness: 1.25 mm Table size: 700 x 1150 mm Weight, approx.: 290 kg Equipment: -Hold - Side stop with angle adjustment and handwheel

cutting length: 3150 mm sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Side stop and table lengths Cutting length limitation Cut edge illumination Operating instructions Weight approx. 4200 kg

No. 5129: 1 gebr. Fold closers Fabr. RAS, type 700 M

Max bending length: 3200 mm Max sheet thickness: 4 mm steel Weight: approx. 5800 kg Mwauag Motor-controlled rear stop with folding cams up to 1500 mm Motorized bending cheek adjustment Multibend 9000 Control Segmented upper cheek tool with automatic tool clamping (height 150 mm)

Sell a table scissors, which was used exclusively for plastic cutting. Manufacturer RAS Type: 50.20 Space requirement 2.5m1.1m1.6m High Cutting length 1020mm Nmyhr Cutting thickness 1.25mm Weight 220kg

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

sheet width: 2040 mm plate thickness: 2.00 mm thickness at Niro-steel: 1.25 mm no. of strokes: 63 Hub/min cutting angle: 1.10 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 0 - 550 mm column arm: 100 mm Control: manuell engine output: 2.8 kW weight of the machine ca.: 1100 kg. range L-W-H: 2650 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 0.0 - 550 mm - Machine side stand with projection .. 100 mm - 1x hold-down bar - 1x long side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - Connection cable including plug - original instruction man ...

sheet width: 3200 mm plate thickness: 2,5 mm weight of the machine ca.: 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 1 mm pre-bending: - shaft diameter: 56 mm weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,5 x 0,55 x 1 m Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: - Machine number: 188/9 - Useful length: 1020 mm - Sheet thickness: max. 1.25 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,570 x 450 x 920 mm

sheet width: 4040 mm plate thickness: 5,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,20 t dimensions of the machine ca.: m • Angle stop 1700 mm • Support arms according to photo • Backgauge controlled 1000 mm • pneumatic sheet metal holding device • automatic cutting gap adjustment • Small parts switch to the front • Control System 2005 • Rear safety light barrier Dimensions: L 4.8 x W 2.20 (plus support arms) x H 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical details: Working width 2040 mm, sheet thickness 3.5 mm, stand width 2100 mm, sheet width 2040 mm, power 3.7 kw weight approx.: 2,300 kg, Approx. Onsite Dimension. (l x w x h): 3,350 x 1,350 x 1,350 mm

plate thickness: 1,5 mm roll diameter: 76 mm bending speed: 4,7/9,4 m/min total power requirement: 0,37/0,55 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 0,6 x 0,6 m Electric 380 Volt: Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2 mm strokes per minute until: 63 throat: 100 mm cutting angle: 1,13 ° table height: 750 mm table width: 320 mm table height over floor: 750 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 3,1 x 2 x 1,3 m Electric 380 Volt: Rear register front operated: 15 - 550 Foot switch: Squaring arm: Support arms: 3 x Motorized guillotine shears in the swing cutting system with adjustable from the front manual backgauge with analogue display and reading optics. Power transmission via gearbox, eccentric shaft and connecting rod on the cutter bar. Less noise level because the gear is only switched on during the cutting process is. Hold-down beam with continuous pressure element made of elastomers material that ensures secure clamping of the sheet metal. The cutting performance refers to 400 N/mm² strength. Ma ...

sheet width: 2040 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm no. of strokes: 50 Hub/min cutting angle: 1.4 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 1.0 - 550 mm column arm: 100 mm Control: manuell engine output: 5.5 kW weight of the machine ca.: 2050 kg. range L-W-H: 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front -  ...

CNC-controlled edge bending machine, manufactured by RAS Germany-Reinhardt Maschinenebau GmbH type 64.12 - 1280 x 3.5 mm. Thickness of bent steel sheet (St40) 3.5 mm; bending length 1280 mm. Setting the bending angle up to 28 degrees from the desktop. Jaw opening 300 mm. 2.2 kW drive. Weight 1180 kg. Full DTR documentation. Lots of additional tools, strips for flattening sheet metal.

Edge bending machine manufactured by RAS GmbH Germany -type 74.40 4060 x 3 mm. Multibend 901 control, color, 2D graphics, bending simulation. Automatic setting of the bending radius depending on the material thickness. Super simple and intuitive control operation. Jaw opening 300 mm. Large bumper departure up to 1500 mm. 7.5 kW drives. Weight 6800 kg. Full O&M documentation, diagrams.

This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.