OTT used machine for sale

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Ott Edge Banding Machine Profimatik M 257-FÜ with pre-joining used, good condition Make Ott Type Profimatik M 257-FÜ Year of construction 2001 Banding thickness 20 / 25 mm Banding height 60 / 65 mm heated inlet ruler Thick edges up to 20 / 25 mm Caps from the roll up to 3 mm Pre-joining with DIA tools 2 x 1.8 kW Cross-cut unit 0°/20° - 2 x 0.8 kW Flush milling 2 x 2.2 kW Bevel milling 2 x 0.6 kW Radius milling 2 x 0.6 kW Radius Scraper Blade Copy corners 4 x 0.8 kW Grinding unit Edge finishing (buffing) Auto. Edge magazine Feed rate infinitely variable 8 - 24 m with motorized adjustment Granulate high-speed heating basin (EVA) Route control Program control with 98 programs Soundproofing hood Large roller support High-speed heating basin with automatic Synchronization and counter-rotation control of the glue roller Automatic ...

Key data: 1100 mm, 2 , 160 mm

Here we offer a massive Ott wide belt sander for sale. Technical data at a glance: Ott wide belt sander MEGAtr 11 built in 1996 Grinding width 1100mm Workpiece thickness min: 3mm max.160mm Abrasive belt dimension:1120x1900mm Abrasive belt speed 18m/sec Feed speed 5/10 m/min Motor power: 11 kW 2-Aggregates: Calibration roller Combi unit with shoe

OTT Pacific V12-F PLUS PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller and edge magazine High-speed gluing station / overhead Double roller top pressure with electr. Positioning Auto. Inlet ruler Flush caps pneum. 0-3° Flush milling/bevel milling 15/30/45° - 12 mm Radius milling R-2, R-5 Corner rounds Radius Scraper Blade Surface scraper blade Soundproof booth with room extraction Machine from a small business with very few linear meters in TOP CONDITION

Key data: 2 mm, 50 mm

Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...

Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...

Key data: 1360 mm, 1 , 150 mm

Wide belt sander belt sander veneer sander OTT Type: ALPHA 136 one belt combi unit - Calibration loops via roller - Fine grinding with rigid sanding pad - Veneer grinding with insert-controlled air shoe Sanding width up to approx. 135 cm Passage height approx. 3 - 150 mm Cleaning brush at the outlet Motor power 11 KW Total power approx. 13.3 KW Belt speed 18m/sec Feed rate max. approx. .8m/min Dimensions approx. 2.06 x 2.0 x 2.1 m Weight approx. 2600 Kg The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measuremen ...

OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION

max. banding thickness : 0.2 - 6 mm Min. workpiece thickness : 8.0 mm max. workpiece thickness : 42 mm min. workpiece width : 70 mm Feed speed 1: : 12 m/min Adjustment of the joining ruler : axis via control Heating time : approx. 6 min Auto. Role Magazine : Yes Cross-cut shears up to : 3.0 mm Single edge feeder : Yes Gluing : Glue basin with granules Cross-cut saw : Yes Double-cap unit Combination unit flush milling

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0

Model UNIKAT 203 up to 20 mm solid edge, caps, milling, rounding and chamfering unit

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a dia ...

ORDER NO. 6556 TECHNICAL DATA - max width of the workpiece 1100mm - max height of the workpiece 160mm 2 aggregates: 1) corrugated rubber roller for calibration 2) pneumatic shoe +2 metal rollers in advance: - 2 rollers, metal, slip - pressure - aggregate - 2 slip metal rollers - aggregate - 2 rollers, metal, slip - cleaning brush bottom: - 2 rubber rollers, slip rollers - pulling tape - oscillation of pneumatic tapes on photocells - lifting the electric table - 2 types of feed speed - working pressure 8-10bar - diameter of the extraction connection 2x200mm - total power 30kW - overall dimensions L/W/H 2230x2020x2050mm - weight about 3000kg Net price: 25900 PLN Net price: 5756 EUR depending on the price 4,50 EUR (Prices are subject to change with higher fluctuations)

Press with press area 2200 x 1100 with built-in mould press

---------------

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Plate dimensions: 2200x1100 mm Daylight opening: 400 mm Number of daylights: 1 St. Motor output: 12 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer press, manufacturer: OTT, type: 300 K 160-S, year of manufacture: 1975, serial no.: 8565, heating capacity 36 kW, 2 heating plates approx. 3,500x1,300 mm, 8 cylinders, plate storage table with castors approx. 4,000x1,300 mm

Edge thickness: maximum 15mm; Workpiece thickness: from 8mm - 60mm; Workpiece width: minimum 60mm; Glue basin: granules; Cross-cut shears: yes; Milling station 1: flush / chamfer; Inlet ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 7kW; Machine length: 2.8m; Machine width: 1.2m; Weight: 1000kg;

Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008