13 offers niigata

Category: 1102 engines / Gas engines
Latest update: 14.11.2022 add to watchlist
ankerimg
item-No.: 159716659
New in: 2004
used
Seller: country-kr Evelin of America Corporation

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

Category: 103 milling machines / Bed Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794329
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...

Category: 103 milling machines
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160318264
New in: 1981
used
TOP Seller: country-de Surplex GmbH
Location: Deutschland, 42657 Solingen
Price: used machinery auction RESALE 300 €

Description: Serial number: 82 189 Frequency: 50 Hz Voltage 220 / 380 volt , With 3-axis display , Attention: machine vice is not included z-motion: 400 mm, x-motion: 1,000 mm, y-motion: 420 mm, table surface area l x w : 1600x370 mm, tool taper: ISO 50, turning speed range: 45 - 1400 rpm, weight approx.: 4,000 kg, dimensions (l x w x h) approx.: 2,300 x 2,200 x 1,800 mm

Category: 101 boring mills and machining centers / Other Machining Centres
Latest update: 07.06.2022 add to watchlist
ankerimg
item-No.: 159088555
New in: 1988
used
Seller: country-sk ENGINEX KOSICE

Niigata HN63B multi pallet horizontal machining center Control system FANUC 3 axes: x- 1000mm y- 866mm z- 700mm Weight approx. 27000 kg

Category: 1102 engines / Engines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 152179865
New in: 2011
used
Seller: country-in

Please Find here with Details of Available good condition Niigata Engine for Sale MAKE - NIIGATA TYPE - 8L28HX Kw - 2206 RPM - 750 Running Hours - 18000 Weight - 21500 Year - 2011

Category: 1102 engines / Engines
Latest update: 28.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 151044080
New in: 2007
used
Seller: country-in

Please Find here with Details of NIIGATA 6L28HX Engine Available for Sale. MAKE:NIIGATA ENGINE MODEL:6L28HX ENGINE NUMBER:24186 KW:1838 YEAR:2007 Kindly advise your interest

Category: 1101 power generators / Gas generators
Latest update: 07.09.2022 add to watchlist
ankerimg
item-No.: 158298201
New in: 2005
used
Seller: country-fi JADE Trading OY
Location: 00540 Helsinki

These 3-phase generators are manufactured by Niigata in 2005. Engines are V-18 type, cylinders diameter is 220mm and stroke is 300mm. Engines are started by air motor and they have engine driven lubrication pump. Generators are equipped with anti-vibration rubber pads. Engine rotates clockwise viewed from the generator side. Scheduled 30 000 hours’ maintenance was carried out to both engines in April 2019. Plant control system, mechanical indoor auxiliaries and MCC cabinets belongs to the scope of supply. Both units are installed and in operation till autumn 2020. Product: Gas Engine Generators with auxiliaries Model: 18V22AG Electrical output: 2880kWe Number of gensets: 2 pcs Manufacturing year: 2005 Running hours approx.: 31100 – still in operation Rotation speed: 900rpm Voltage:  ...

Category: 103 milling machines / Bed Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794328
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Univ. Bed milling machine make NIIGATA type 3 UMAYear 1978Table surface: 1600 x 380 mmTable longitudinal path X: 1000 mmTransverse Y: 420 mmVertical path Z: 400 mmSpindle mount: ISA 5016 spindle speeds: 45 - 1400 rpm9 feeds longitudinal and transversal: 20 - 800 mm9 vertical feeds: 5 - 200 mmRapid traverse longitudinal and transverse: 3000 mm / minxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 vertical: 750 mm / minMax. Table load: 700 kgMax. Distance between stand / spindle: 470 mmMax. Distance table / spindle head: 70 - 470 mmDrive power: 11 kWWeight: 3.9 tExternal dimensions: 2245 x 2280 x 1830 mmused, despite the year of construction ingood conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

Category: 103 milling machines / Bed Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794327
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Universal bed milling machine make NIIGATA type 2 UMCMachine -No: 62950 Year 1986Table size: 1370 x 310 mmTable longitudinal path = X: 870 mmTransverse travel = Y: 370 mmVertical travel = Z: 400 mmDistance table to spindle: 50 - 450 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 longitudinal and transverse feeds: 20 - 800 mm / min9 vertical feeds: 9 - 355 mm / minRapid traverse longitudinal and transverse: 3000 mm / minRapid traverse vertical: 1375 mm / minDrive power: 5.5 kWFeed motor: 1.5 kWDimensions L x W x H: 1825 x 2005 x 1745 mmWeight approx: 3000 kgWith- 3-axis digital display Anilam- Milling head can be swiveled from vertical to horizontalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Category: 103 milling machines / CNC Milling Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794345
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Universal bed milling machine make NIIGITA type 2 UMCBuilt in 1986Technical specifications:Table surface: 1370 x 370 mmLongitudinal table travel X: 870 mmCross table travel Y: 370 mmUpright vertical path Z: 400 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 feeds lengthways and crossways: 20 - 700 mm / minRapid traverse along and across: 3 m / min9 feeds vertical: 9 - 335 mm / minRapid traverse vertical: 1375 mm / minThroat: 350 mmDrive power: 5.5 kWDimensions L x W x H: 2000 x 1800 x 1745 mmWeight approx .: 2400 kgWith- Point route control Kirchfeld FK 82- Universal milling head- spindle brake- cooling device- high pressure vice- many ISA 50 tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offe ...

Category: 103 milling machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156885365
New in: 1987
used
Seller: country-de WeMa A. Pigge GmbH
Location: Goldenstedt
Price: 2.000 €

x-travel: 1000 mm y-travel: 420 mm z-travel: 400 mm table-size: 1600 x 380 mm table load: 700 kg spindle taper ISO: 50 feed range lengthways and crosswise: 20 - 800 mm feed range - vertical: 5 - 200 mm/min rapid traverse longitudinal and cross: 3000 mm/min rapid traverse vertical: 750 mm/min spindle speed:: 45 - 1400 U/min number of milling spindle turning speeds: 16 distance spindle center to column: 470 mm distance spindlenose - table min./max.: 70 - 470 mm digital readout: 3-Achsen power capacity: 11 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2245 x 2280 x 1830 mm partially defective 1 scale defective machine will be sold as spare part carrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156894015
New in: 1987
used
Seller: country-de WeMa A. Pigge GmbH
Location: Goldenstedt
Price: 1.500 €

x-travel: 1000 mm y-travel: 420 mm z-travel: 400 mm table-size: 1600 x 380 mm table load: 700 kg spindle taper ISO: 50 feed range lengthways and crosswise: 20 - 800 mm feed range - vertical: 5 - 200 mm/min rapid traverse longitudinal and cross: 3000 mm/min rapid traverse vertical: 750 mm/min spindle speed:: 45 - 1400 U/min number of milling spindle turning speeds: 16 distance spindle center to column: 470 mm distance spindlenose - table min./max.: 70 - 470 mm digital readout: 3-Achsen Axesta power capacity: 11 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2245 x 2280 x 1830 mm Storage for handwheels renewed electrical problem, digital display probably defective! without milling head! No manual! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
Latest update: 28.11.2022 add to watchlist
ankerimg
item-No.: 160328286
New in: 1986
used
Seller: country-de Innovac GmbH
Location: Deutschland

X-travel: 870mm, y-travel: 370mm, z-travel: 400mm, table dimensions: 1370x310mm, rotational speed: 40-1740/min, connected load: 5.5kW, controls: ACU-RITE MillVision.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online